增强聚氨酯硬泡塑料的冲击性能研究

本文研究了SiO2和纤维增强剂对于聚氨酯硬泡塑料冲击性能的增强效应.试验结果表明,加入SiO2并不能增强聚氨酯硬泡塑料冲击性能.然而以2.5% KH550偶联剂四氢呋喃溶液处理的玻璃纤维作为增强剂,能使聚氨酯硬泡塑料的冲击性能有显著的提高.     

Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube

Effects of superficial gas velocities to a draft tube, to an annulus section and particle size on the solid circulation rate (G,) have been determined in an internally circulating fluidized bed (0.28 m I.D. × 2m high) with an orifice type draft tube. The solid circulation rate from the draft tube to an annulus section increases with increasing gas velocities to the draft tube(U _d ) and annulus section (U_a) and consequent increase in pressure drop across the orifice (ΔP_or). However, the values ofG _s decrease by 7–21% with increasing particle size from 86 to 288 μm. The pressure drop across the orifice increases with increasingU _d andU _a . However, ΔP_or decreases by 5–23% with increasing particle size. To predictG _s in an internally circulating fluidized bed, a correlation is proposed as a function of ΔP_or This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement Korea University.     

Low‐temperature photoinitiation solution polymerization behavior of N‐vinylcarbazole in tetrahydrofuran

N‐Vinylcarbazole (VCZ) was solution‐polymerized in tetrahydrofuran (THF) at ?20, 0, and 20°C using the photoinitiation method; the effects of the amount of solvent, polymerization temperature, and photoinitiator concentration were investigated. On the whole, the experimental results corresponded to predicted ones. Low polymerization temperature using photoinitiation proved to be successful in obtaining poly(N‐vinylcarbazole) (PVCZ) of a high molecular weight with a smaller temperature rise during polymerization; nevertheless of free radical polymerization by 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN). The photo‐solution polymerization rate of VCZ in THF was proportional to the 0.47 power of ADMVN concentration. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ prepared in THF at ?20°C using a photoinitiator concentration of 0.00005 mol/mol of VCZ, a weight‐average molecular weight of 510,000 was obtained, with a polydispersity index of 1.73, and a degree of lightness converged to about 99%. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3667–3672, 2002     

Characterization of pressure signals in a bubble column by wavelet packet transform

All experiments of pressure fluctuations were carried out in a bubble column with a moderately large column of 0.376 m ID. The recently developed technique of wavelet packet transform based on localized wavelet functions is applicable to analysis of the fluctuating signals. The time series of pressure fluctuation signals have been analyzed by means of wavelet packet transform components, decomposition through best basis algorithm and timefrequency representation. By resorting to this technique, the objects in bubbly flow regime have fine scales and frequencies than ones in churn-turbulent flow regime. Thus, this wavelet packet transform method enables us to obtain the frequency content of local complex flow behaviors in a bubble column.     

Effect of hydrophobic hexafluoroisopropylidene group on the water sorption behaviors of rigid poly(p‐phenylene pyromellitimide) polyimide thin films

We prepared poly(p‐phenylene pyromellitimide) (PMDA–PDA), poly(p‐phenylene 4,4′‐hexafluoroisopropylidene diphthalimide), and their copolyimides with various compositions to explore the relationship between the water sorption and structure. The water sorption behaviors were gravimetrically investigated as a function of composition and temperature and interpreted with a Fickian diffusion model in films. Overall, the water sorption behaviors were strongly dependent on the changes in morphological structure, which originated from the variations in composition. When the content of the bulky hexafluoroisopropylidene group (6FDA) was increased, the water uptake decreased from 5.80 to 3.18 wt %, whereas the diffusion coefficient increased from 3.6 × 10^?10 to 11.3 × 10^?10 cm²/s. The relatively high water uptake in the PMDA–PDA polyimide film was successfully healed by the incorporation of 6FDA, which may have resulted from the increases in the intermolecular packing order and hydrophobicity. The degree of orientation and crystallinity, which are in‐plane characteristics, were directly correlated to the diffusion coefficient and activation energy in the polyimide film. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3442–3446, 2003     

Selective O-Alkylation Reaction of Hydroquinone with Methanol over Cs Ion-Exchanged Zeolites

O-alkylation reaction of hydroquinone with excess methanol was performed by using alkali metal ion-exchanged zeolite catalysts in a slurry type reactor to substitute the solid zeolite catalysts for the homogeneous liquid phase catalysts. This was also done to produce selectively mono-alkylated 4-methoxyphenol, a valuable intermediate for the perfume, flavor, food and photo industries. The effects of the basicity of various zeolites and reaction conditions such as temperature, reaction time and the amount of catalyst on the catalytic activity and selectivity were tested to maximize the yield of 4-methoxyphenol. Thus far, 84% selectivity at 95% conversion of hydroquinone was obtained at the optimum reaction conditions (240 ‡C, reaction with 0.6 g catalyst for 16 h), which was thought to result from the strong basic property and shape selectivity of the Cs ion-exchanged NaX zeolite.     

Hydrodynamic characteristics of a FCC regenerator

The hydrodynamic and gas mixing characteristics have been determined in a FCC regenerator (0.48 m I.D.x3.4 m high) with FCC particles. Solids holdup in the dense bed decreases with increasing gas velocity, but it increases in the freeboard region. The bubble/void fraction increases with an increase along the bed height at a given gas velocity and increases with increasing gas velocity at a constant bed height. Backmixed tracer gas at the wall region is higher than that at the center region of the bed. The gas backmixing coefficient decreases with increasing gas velocity.     

Stormer-numerov approximation for numerical solutions of ordinary and partial differential equations

Stormer-Numerov approximations of high accuracy were developed for solutions of non-linear boundary value problems and nonlinear elliptic partial differential equations. The approximations can be easily adopted also for parabolic partial differential equations in one and more space dimensions and feature fourth-order accuracy. For boundary value problems only three nodes are necessary to obtain the desired fourth order accuracy. The finite difference formula for parabolic partial differential equations can be readily generalized to a nonequidistant mesh so that automatic regridding in space may be used. The Stomer-Numerov approximations are important for solution of problems where storage limitations and computer time expenditure preclude standard second order methods. Because of the fourth order approximations a low number of mesh points can be used for a majority of chemical engineering problems. The application of Stormer-Numerov approximations is illustrated on a number of examples.     

模数对无机富锌涂料和涂层性能的影响

硅酸钾富锌涂料是目前广泛使用的钢铁防腐蚀涂料。作为涂料粘结剂的高模数硅酸钾溶液对涂料和涂层的性能有重要影响。本研究考察了硅酸钾粘结剂的模数变化对涂料及涂层性能产生的影响。实验结果表明：粘结剂模数的提高可以提高固化后涂层的耐水性能，当粘结剂模数在5.0左右时，所得富锌涂层具有最佳的耐磨性能，但当粘结剂模数超过5.5时会造成涂料施工性能和贮存稳定性下降，涂层柔韧性降低，从而降低涂层的耐磨性能。     

Kinetics of cellobiose decomposition under subcritical and supercritical water in continuous flow system

The effects of reaction temperature, pressure and residence time were investigated with a flow apparatus. Cellobiose decomposition kinetics and products in suband supercritical water were examined at temperatures from 320 to 420 °C at pressures from 25 to 40 MPa, and at residence times within 3 sec. Cellobiose was found to decompose via hydrolysis and pyrolysis. The yield of desired hydrolysis product, glucose, was the maximum value of 36.8% at 320 °C, 35 MPa, but the amount of 5-(hydroxymethyl)furfural (HMF), fermentation inhibitor increased too because residence time increased in the subcritical region owing to decrease of reaction rate. Meanwhile, though the yield of glucose is low in the supercritical region, the yield of HMF decreased compared with the subcritical region; and at the minimum yield of HMF (380 °C, 25 MPa), the yield of glucose was 21.4%. The decomposition of cellobiose followed first-order kinetics and the activation energy for the decomposition of cellobiose was 51.05 kJ/mol at 40MPa.