The European,Japanese and US protective helmet,gloves and boots for firefighters: thermoregulatory and psychological evaluations

The purpose of this study was to investigate the physiological and subjective responses of the European, Japanese (JPN) and US firefighters' helmet, gloves and boots for international standardisation. Three experimental conditions were evaluated (clothing mass: 9.4, 8.2 and 10.1 kg for the three conditions, respectively) at the air temperature of 32°C and 60% relative humidity. The results showed that there was no significant difference among the three conditions in oxygen consumption, heart rate, total sweat rate, rectal temperature and mean skin temperature, whereas peripheral temperatures and subjective perceptions were lower in the JPN condition than in the other conditions (P < 0.05). These results indicate that a 0.5-kg reduction in helmet mass and a 1.1-kg reduction in boot mass during exercise resulted in a significant decrease in head and leg temperatures and subjective perceptions, while a 1.9-kg reduction in total clothing mass had insignificant influences on the metabolic burden and overall body temperature.     

Face detection based on skin color likelihood

We propose a face detection method based on skin color likelihood via a boosting algorithm which emphasizes skin color information while deemphasizing non-skin color information. A stochastic model is adapted to compute the similarity between a color region and the skin color. Both Haar-like features and Local Binary Pattern (LBP) features are utilized to build a cascaded classifier. The boosted classifier is implemented based on skin color emphasis to localize the face region from a color image. Based on our experiments, the proposed method shows good tolerance to face pose variation and complex background with significant improvements over classical boosting-based classifiers in terms of total error rate performance.     

Semi-annual cycle of sea-surface temperature in the East/Japan Sea and cooling process

Semi-annual cycles of the sea-surface temperature (SST) in the East/Japan Sea (EJS) and their forcings were examined by analysing National Oceanic and Atmospheric Administration/Advanced Very-High-Resolution Radiometer data, scatterometer wind vectors, and heat flux data. The semi-annual cycle contributed to the total variance of the SST by 8% and amounted to 25% of the amplitudes of the annual SST cycle, particularly in the Tatarskiy Strait and along the continental shelf off Russia. The lowest phase, corresponding to the minimum SST, occurred during early November and 6 months earlier in May or June depending on the position. The forcings of the semi-annual cycle were not semi-annual but substantially annual with a lag of 6 months, which gave rise to SST cooling in spring and autumn. Our analyses illustrated that SST cooling in autumn was caused by direct, local atmospheric wind forcings, whereas the cooling with large amplitudes of the semi-annual cycle in spring was caused by the non-local, remotely forced cold water advection of the Liman Current associated with sea-ice melting in the Tatarskiy Strait. The phase lag of 1–2 months between the complete melting of the sea ice in the Tatarskiy Strait and the surface cooling along the Russian continental shelf was related to the advection of cold water from sea ice in the form of the Liman Cold Current. The semi-annual cycle also resulted from asymmetry of the time series of the SST due to a long cold winter and a short warm summer. To understand how SST curves are distorted and asymmetric, we suggested two mathematical parameters of kurtosis and skewness. In addition, we suggest that the ratio of the semi-annual amplitude to the annual amplitude of SST harmonics can be used as a typical indicator of the asymmetry in year-to-year SST variations.     

The excess enthalpy of gaseous mixtures of carbon dioxide with methane

Excess enthalpies (heats of mixing) of mixtures of methane and carbon dioxide have been measured in a flow calorimeter at temperatures between 10°C and 80°C and pressures up to 100 atmospheres. All measurements were for the mixing of two gas phases. The results were compared with various predictions based on equations of state and the principle of corresponding states.     

Sterol metabolism in the opportunistic pathogen <Emphasis Type="Italic">Pneumocystis</Emphasis>: Advances and new insights

Pneumocystis can transiently colonize healthy individuals without causing adverse symptoms, and most people test positive for exposure to this organism early in life. However, it can cause Pneumocystis pneumonia (PcP) in people with impaired immune systems and is a major cause of death in HIV/AIDS. Although it has close affinities to the Ascomycetes, Pneumocystis has features unlike those of any single group of fungi. For example, Pneumocystis does not synthesize ergosterol, which is consistent with the inefficacy of amphotericin B and some triazoles in clearing PcP. Pneumocystis sterols include distinct Δ⁷ 24-alkylsterols. Metabolic radiolabeling experiments demonstrated that P. carinii synthesizes sterols de novo. Cholesterol is the most abundant sterol in Pneumocystis; most, if not all, is scavenged from the mammalian host lung by the pathogen. The P. carinii erg7, erg6, and erg11 genes have been cloned, sequenced, and expressed in heterologous systems. The recombinant P. carinii S-adenosyl-l-methionine:C-24 sterol methyl transferase (SAM:SMT) has a preference for lanosterol over zymosterol as substrate, and the enzyme can catalyze the transfer of either one or two methyl groups to the C-24 position of the sterol side chain. Two different sterol compositions were detected among human-derived P. jirovecii; one was dominated by C₂₈ and C₂₉ sterols, and the other had high proportions of higher molecular mass components, notably the C₃₂ sterol pneumocysterol. The latter phenotype apparently represents organisms blocked at 14α-demethylation of the sterol nucleus. These studies suggest that SAM:SMT is an attractive drug target for developing new chemotherapy for PcP.     

Effect of reactive diluents on properties of unsaturated polyester/montmorillonite nanocomposites

Unsaturated polyester (UP)/montmorillonite (MMT) nanocomposite was prepared by using hydroxypropylacrylate (HPA) as a reactive diluent instead of conventional styrene monomer and the effect of polarity of reactive diluent on properties of nanocomposite was investigated. X‐ray and mechanical test data indicated that mixing for an extended period of time is essential to enhance the physical properties of nanocomposites in the UP/Cloisite 6A system. This was attributed to the high polarity of HPA that may disturb the preintercalation of UP resin into the galleries of MMT. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 238–242, 2004     

Living cationic polymerization of isobutyl vinyl ether (II): Photoinduced living cationic polymerization in a mixed solvent of toluene and diethyl ether

A new method of preparation of living cationic polymer of isobutyl vinyl ether via photoinduced polymerization in the presence of diphenyliodonium iodide (DPII, initiator) and zinc iodide in a mixed solvent of toluene/diethyl ether, which was irradiated at ?78°C for short period, was completed within 15 min. The reaction was allowed for further reaction in the dark until monomer was fully consumed. It was found that increase in the conversion of monomer to polymer during the irradiation is very limited. Confirmation of the linear dependence of number‐average molar mass of resulting polymer on % conversion together with the fact that polymerization proceeds until monomer consumption, and controllability of number‐average molar mass of resulting polymer, depending on the molar ratio of monomer and initiator, strongly suggests the living nature of this polymerization, unless reaction temperature becomes higher than 0°C, i.e., the absence of chain breaking process. The narrow molar mass distribution, whose polydispersity index values are less than 1.2, reveals that the rate of initiation where irradiation is usually completed within 15 min is much faster than that of propagation in cationic nature in this system. Effect of some major factors, such as solvent polarity and temperature, on the living nature of the polymerization was also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3581–3586, 2006     

Rheological and electrical properties of polycarbonate/multi-walled carbon nanotube composites

Rheological and electrical properties of the polycarbonate (PC)/multi-walled carbon nanotube (MWNT) were studied. The MWNT was funtoinalized by treating with the hydrogen peroxide (H₂O₂). The H₂O₂ treated MWNT was dried by thermal and freeze drying methods. From the morphological studies, the degree of entanglement of the MWNT was decreased after treating with the H₂O₂. For the H₂O₂ treated MWNT (thermal drying), the length of the MWNT was shortened compared that of the H₂O₂ treated MWNT (freeze drying). The rheological and electrical properties of the PC/MWNT (H₂O₂ treated) composites increased compared that of the PC/MWNT (untreated) composites. Also, the electrical conductivity showed higher value for the PC/MWNT (H₂O₂ treated, freeze drying) composites compared that of the PC/MWNT (H₂O₂ treated, thermal drying) composites. From the results of the morphological, rheological, and electrical properties of the PC/MWNT composites, it is suggested that the electrical and rheological properties of the PC/MWNT composites are affected by the MWNT-MWNT network structure, which is related with the MWNT morphologies such as the degree of aggregation and aspect ratio of the MWNT.     

Novel method of preparing Ag–Hg alloy on polyacrylamide films and their structure

A novel method is proposed of preparing thin Ag–Hg alloy on PAAm film surface at room temperature: The film of interest is formed by holding PAAm aqueous solution with AgNO₃ in Hg-saturated atmosphere. Two kinds of films, one of which is a conductor and the other an insulator, can be selectively formed with pH-controlled PAAm solution by ammonia. The conducting surface is assigned to the α phase of Ag–Hg alloy by means of X-ray analysis. Potentiometric titration and IR spectral studies suggest the existence of PAAm–Ag⁺ complexes. On the basis of their structure and the oxidation and reduction potential of Ag⁺ and Hg²⁺, the mechanism of film formation is also discussed.     

Nano-sized carbon hollow spheres for abatement of ethylene

In this paper, the ethylene adsorption capacities of the nano-sized carbon hollow spheres (CNB) and active carbon (AC), the Pd (PdCl₂) impregnated CNB or AC (Pd/CNB, Pd/AC) and heat treatment under various conditions, were studied at different ethylene concentrations from 64 to 1060 ppm. The results indicated that AC had a good ethylene adsorption capacity at high ethylene concentration. Pd impregnation decreased the ethylene adsorption capacity of AC. Heat treatment and H₂ activation could increase the ethylene adsorption capacity, but also lowered than AC itself. CNB had lower ethylene adsorption capacity than AC, but heat treatment and H₂ activation could increase its ethylene adsorption capacity markedly. With activating condition from heat treatment in N₂ at 300 °C to activation in H₂/N₂ at 100 °C, to activation in H₂ at 200 °C, and to activation in H₂ at 300 °C, the ethylene adsorption capacity of Pd/CNB was increased regularly. At low ethylene concentration, viz., 64 ppm, the ethylene adsorption quantities (q _a) by Pd/CNB activated in H₂ at 200 or 300 °C were higher than any other adsorbents. So, activated in H₂ atmosphere at higher than 100 °C, Pd/CNB is particularly advantaged for adsorbing low concentration of ethylene. Amongst all the adsorbents used, Pd/CNB activated in H₂ atmosphere at 300 °C for 2 h has the highest ethylene adsorption capacity at lower concentration than 125 ppm. In addition, all the CNB, Pd/CNB, AC, and Pd/AC samples can be easily regenerated in airflow for more than 3 h.