On the improvement of detection characteristics of trans-stilbene crystals by improving crystal perfection

Organic molecular scintillating crystals are noted for their good timing and particle discrimination process. Trans-stilbene is one such candidate noted for its good particle detection characteristics for the past five decades. Progressive strengthening of detection characteristics of trans-stilbene has been attempted by improving crystal perfection. A series of timing resolution studies have been carried out for the Bridgman grown trans-stilbene crystals under different experimental conditions. The results were compared with the previously reported values. Pulse shape discrimination process has been carried out for ²⁴¹Am and ²⁵²Cf sources and good discrimination has been obtained for gamma-alpha and gamma-neutron sources from the grown organic phosphor crystal. Electronic Publication     

Biodegradation of gelatin–g-poly(ethyl acrylate) copolymers

Gelatin-g-poly(ethyl acrylate) copolymers were prepared in an aqueous medium, using K₂S₂O₈ initiator. The composition of the graft copolymers was dependent upon temperature and duration of the reaction. The number of grafting sites was small and molecular weight of the grafted poly(ethyl acrylate) branches was high. Three copolymer samples with grafting efficiencies of 33.3%, 61.0%, and 84.0%, were tested for their microbial susceptibility in a synthetic medium employing a mixed inoculum of Bacillus subtilis, Pseudomonas aeruginosa, and Serratia marcescens and the percent weight losses were 12%, 10.1%, and 6.0%, respectively, after 6 weeks of incubation. The extent of degradation seems to decrease with increasing grafting efficiency. There was initial rapid weight loss accompanied by the exponential increase in bacterial population and pH of the culture medium during the first week. The nitrogen analysis also showed the utilization of the polymer. A parallel set of experiments, carried out by employing the samples as the only source of both carbon and nitrogen, showed a marginal but definite increase in the utilization of the polymer.     

Informal and formal requirements specification languages: bridgingthe gap

The differences between informal and formal requirements specification languages are noted, and the issue of bridging the gap between them is discussed. Using structured analysis (SA) and the Vienna development method (VDM) as surrogates for informal and formal languages, respectively, two approaches are presented for integrating the two. The first approach uses the SA model of a system to guide the analyst's understanding of the system and the development of the VDM specifications. The second approach proposes a rule-based method for generating VDM specifications from a set of corresponding SA specifications. The two approaches are illustrated through a simplified payroll system case. The issues that emerge from the use of the two approaches are reported     

Development of nano indium tin oxide (ITO) grains by alkaline hydrolysis of In(III) and Sn(IV) salts

Indium tin oxide (ITO) nano powders of different compositions (In: Sn = 90: 10, 70: 30 and 50: 50) were prepared by heat treatment (300-450°C) of mixed hydroxides of In(III) and Sn(IV). The hydroxides were obtained by the reaction of aq. NH₃ with mixed aq. solutions of In(NO₃)₃ and SnCl₄. FTIR and TG/DTA studies revealed that powders existed as In(OH)₃H₂O—SnO₃H₂H₂O in the solid state and then they transformed to In₂O₃—SnO₂ via some metastable intermediates after 300°C. Cubic phase of In₂O₃ was identified by XRD for the oxides up to 30% of Sn. Particle size measurements of the solid dispersed in acetone and SEM study for microstructure showed that the oxides were in the nano range (55-75 nm) whereas the size range determined from Debye-Scherrer equation were 11–24 nm.     

Stability and throughput analysis of unslotted CDMA‐ALOHA with finite number of users and code sharing

We consider a system comprising a finite number of nodes, with infinite packet buffers, that use unslotted ALOHA with Code Division Multiple Access (CDMA) to share a channel for transmitting packetised data. We propose a simple model for packet transmission and retransmission at each node, and show that saturation throughput in this model yields a sufficient condition for the stability of the packet buffers; we interpret this as the capacity of the access method. We calculate and compare the capacities of CDMA‐ALOHA (with and without code sharing) and TDMA‐ALOHA; we also consider carrier sensing and collision detection versions of these protocols. In each case, saturation throughput can be obtained via analysis of a continuous time Markov chain. Our results show how saturation throughput degrades with code‐sharing. Finally, we also present some simulation results for mean packet delay. Our work is motivated by optical CDMA in which “chips” can be optically generated, and hence the achievable chip rate can exceed the achievable TDMA bit rate which is limited by electronics. Code sharing may be useful in the optical CDMA context as it reduces the number of optical correlators at the receivers. Our throughput results help to quantify by how much the CDMA chip rate should exceed the TDMA bit rate so that CDMA‐ALOHA yields better capacity than TDMA‐ALOHA. This revised version was published online in June 2006 with corrections to the Cover Date.     

Effect of gravity on visco-elastic surface waves in solids involving time rate of strain and stress of first order

The aim of the present paper is to study the effect of gravity on visco-elastic surface waves in solids. The wave velocity equations are deduced from Biot’s theory of initial stress on the assumption that gravity creates a type of initial stress — hydrostatic in nature. Resulting equations are used to investigate surface waves of the Rayleigh, Love and Stoneley types. Results are in good agreement with corresponding classical results when gravity and viscosity are neglected.     

Effect of Nb doping on structural and electric properties of PZT (65/35) ceramic

The aim of this study is to determine the effect of Nb⁵⁺ doping on PZT (65/35) based bulk materials in their structure, micro structure and electrical properties. The Nb content was chosen 0-9 mole%. These materials were prepared by conventional mixed oxide method. X ray diffraction studies suggest the compound to be of rhombohedral perovskite phase. Excess addition of Nb result in pyrochlore and fluorite phase develops in PZT (65/35) sample. Detailed studies of dielectric constant as a function of temperature (40degC to 500degC) and frequency (100 Hz to 1 MHz) suggest that the compounds undergo diffuse type of phase transition. Maximum dielectric constant and resistivity were found to be strongly dependent on doping and measuring frequencies. Using complex impedance analysis micro structural parameters such as bulk and grain boundary resistance, bulk charge carrier concentration and relaxation time were determined