Laser beam machining of zirconia ceramic: An investigation of micro-machining geometry and surface roughness

Journal of Mechanical Science and Technology - Micro-machining of dental ceramics namely as zirconium oxide is carried out through laser beam machining. Micro-channels of different sizes are...     

Impact of β-glucan on debittering,bioaccessibility and storage stability of skim milk fortified with shrimp oil nanoliposomes

Shrimp oil was encapsulated in nanoliposomes and fortified into skim milk. Shrimp oil nanoliposomes (SONL) were thermodynamically stable when added into skim milk at 10 mL 100 mL⁻¹. Mild bitterness in fortified skim milk caused by the SONL was masked by adding β-glucan at various levels (0.05–0.2 g 100 mL⁻¹). With the addition of SONL, fortified skim milk appeared more reddish in colour due to the presence of astaxanthin. Addition of β-glucan resulted in the increase in viscosity of the fortified milk by forming network of junction zones. During the storage of skim milk fortified with SONL and 0.1 g 100 mL⁻¹ β-glucan at 4 °C for 15 days, no major quality changes took place. Simulated in vitro digestion studies revealed that 45.41 g 100 g⁻¹ eicosapentaenoic acid (EPA) and 48.86 g 100 g⁻¹ docosahexaenoic acid (DHA) from shrimp oil were bioaccessible for absorption in the gut after digestion.     

Using artificial intelligence techniques for COVID-19 genome analysis

Applied Intelligence - The genome of the novel coronavirus (COVID-19) disease was first sequenced in January 2020, approximately a month after its emergence in Wuhan, capital of Hubei province,...     

Ultra-Robust Flexible Electronics by Laser-Driven Polymer-Nanomaterials Integration

Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications.     

Transport of pollutant in shallow flows: A space–time CE/SE scheme

This paper focuses on implementation of space–time CE/SE scheme for computing the transport of a passive pollutant by a flow. The flow model comprises of the Saint-Venant system of shallow water equations and the pollutant propagation is described by a transport equation. The one-dimensional and two-dimensional flow equations are numerically investigated using the CE/SE scheme. A number of test problems are presented to check the accuracy and efficiency of the proposed scheme. The results of CE/SE scheme are compared with the central scheme. Both the schemes are found to be in close agreement. However, our proposed CE/SE scheme accurately captures shocks and discontinuous profiles.     

Security and key management in IoT‐based wireless sensor networks: An authentication protocol using symmetric key

Wireless sensor networks (WSN) consist of hundreds of miniature sensor nodes to sense various events in the surrounding environment and report back to the base station. Sensor networks are at the base of internet of things (IoT) and smart computing applications where a function is performed as a result of sensed event or information. However, in resource‐limited WSN authenticating a remote user is a vital security concern. Recently, researchers put forth various authentication protocols to address different security issues. Gope et al presented a protocol claiming resistance against known attacks. A thorough analysis of their protocol shows that it is vulnerable to user traceability, stolen verifier, and denial of service (DoS) attacks. In this article, an enhanced symmetric key‐based authentication protocol for IoT‐based WSN has been presented. The proposed protocol has the ability to counter user traceability, stolen verifier, and DoS attacks. Furthermore, the proposed protocol has been simulated and verified using Proverif and BAN logic. The proposed protocol has the same communication cost as the baseline protocol; however, in computation cost, it has 52.63% efficiency as compared with the baseline protocol.     

Exact Analysis of Non-Linear Fractionalized Jeffrey Fluid. A Novel Approach of Atangana-Baleanu Fractional Model

It is a very difficult task for the researchers to find the exact solutions to mathematical problems that contain non-linear terms in the equation. Therefore, this article aims to investigate the viscous dissipation (VD) effect on the fractional model of Jeffrey fluid over a heated vertical flat plate that suddenly moves in its own plane. Based on the Atangana-Baleanu operator, the fractional model is developed from the fractional constitutive equations. VD is responsible for the non-linear behavior in the problem. Upon taking the Laplace and Fourier sine transforms, exact expressions have been obtained for momentum and energy equations. The influence of relative parameters on fluid flow and temperature distribution is shown graphically. As special cases, and for the sake of correctness, the corresponding results for second-grade fluid and Newtonian viscous fluid are also obtained. It is interesting to note that fractional parameter α provides more than one line as compared to the classical model. This effect represents the memory effect in the fluid which is not possible to elaborate by the classical model. It is also worth noting that the temperature profile of the generalized Jeffrey fluid rises for higher values of Eckert number which is due to the enthalpy difference of the boundary layer.     

Analysis of Silver Nanoparticles in Engine Oil: Atangana–Baleanu Fractional Model

The present article aims to examine the heat and mass distribution in a free convection flow of electrically conducted, generalized Jeffrey nanofluid in a heated rotatory system. The flow analysis is considered in the presence of thermal radiation and the transverse magnetic field of strength B₀. The medium is porous accepting generalized Darcy’s law. The motion of the fluid is due to the cosine oscillations of the plate. Nanofluid has been formed by the uniform dispersing of the Silver nanoparticles in regular engine oil. The problem has been modeled in the form of classical partial differential equations and then generalized by replacing time derivative with Atangana–Baleanu (AB) time-fractional derivative. Upon taking the Laplace transform technique (LTT) and using physical boundary conditions, exact expressions have been obtained for momentum, energy, and concentration distributions. The impact of a number of parameters on fluid flow is shown graphically. The numerical tables have been computed for variation in the rate of heat and mass transfer with respect to rooted parameters. Finally, the classical solution is recovered by taking the fractional parameter approaching unity. It is worth noting that by adding silver nanoparticles in regular engine oil, its heat transfer rate increased by 14.59%, which will improve the life and workability of the engine.