Effects of polycaprolactone molecular weights on thermal and mechanical properties of polybenzoxazine

Polymer blends of polybenzoxazine (PBA‐a) and polycaprolactone (PCL) of different molecular weights (M_n = 10,000, 45,000, and 80,000 Da) were prepared at various PBA‐a/PCL mass ratios and their properties were characterized. The results from dynamic mechanical analyzer (DMA) revealed two glass transition temperatures implying phase separation of the two polymers in the studied range of the PCL contents. Moreover, a synergistic behavior in glass transition temperature (T_g) was evidently observed in these blends with a maximum T_g value of 281°C compared with the T_g value of 169°C of the PBA‐a and about ?50°C of the PCL used. The blends with higher M_n of PCL tended to provide greater T_g value than those with lower M_n of PCL. The modulus and hardness values of PBA‐a were decreased while the elongation at break and area under the stress?strain curve were increased with an increase of the content and M_n of PCL, suggesting an enhancement of toughness of the PBA‐a. Scanning electron micrographs (SEM) of the sample fracture surface are also used to confirm the improvement in toughness of the blends. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41915.     

Effects of aromatic carboxylic dianhydrides on thermomechanical properties of polybenzoxazine‐dianhydride copolymers

Enhanced thermomechanical properties of bisphenol‐A based polybenzoxazine (PBA‐a) copolymers obtained by reacting bisphenol‐A‐aniline‐type benzoxazine (BA‐a) resin with three different aromatic carboxylic dianhydrides, i.e., pyromellitic dianhydride (PMDA), 3,3′,4,4′ biphenyltetracarboxylic dianhydride (s‐BPDA), or 3,3′,4,4′ benzophenonetetracarboxylic dianhydride (BTDA) were reported. Glass transition temperature (T_g), of the copolymers was found to be in the order of PBA‐a:PMDA>PBA‐a:s‐BPDA>PBA‐a:‐BTDA. The difference in the T_g of the copolymers is related to the rigidity of the dianhydride components. Furthermore, the T_g of PBA‐a:BTDA, PBA‐a:s‐BPDA, and PBA‐a:BTDA films was observed to be significantly higher than that of the neat PBA‐a owing to the enhanced crosslink density by the dianhydride addition. This greater crosslink density results from additional ester linkage formation between the hydroxyl group of PBA‐a and the anhydride group of dianhydrides formed by thermal curing. Moreover, the copolymers exhibit enhanced thermal stability with thermal degradation temperature (T_d) ranging from 410°C to 426°C under nitrogen atmosphere. The char yield at 800°C of the copolymers was found to be remarkably greater than that of the neat PBA‐a with a value up to 60% vs. that of about 38% of the PBA‐a. Toughness of the copolymer films was greatly improved compared to that of the neat PBA‐a. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Enhanced film forming ability of benzoxazine–urethane hybrid polymer network by sequential cure method

Uniform copolymer films of benzoxazine resin (BA‐a) and urethane prepolymer (PU) were prepared at various BA‐a/PU mass ratios (100/0, 80/20, 60/40, 40/60, 20/80, and 0/100) via sequential cure method comprising of moisture cure and thermal cure steps. In the moisture cure step, Fourier Transform Infrared (FT‐IR) spectra revealed the network formation between NCO‐terminated group and moisture to firstly produce PU solid film. Then in the thermal cure step, the change of tri‐substituted benzene ring to tetra‐substituted benzene ring was observed suggesting polybenzoxazine network formation in this step. Moreover, the spectra reveal that isocyanate groups in polyurethane structure could react with phenolic hydroxyl groups of BA‐a to form biuret and allophanate groups. Dynamic mechanical analysis (DMA) confirms a synergistic behavior in glass transition temperature (T_g) of the alloys with the highest T_g value of 275°C which is uniquely observed in these alloys obtained from traditionally thermal cure method. The proposed sequential cure method above is found to be highly useful for uniform coating or film casting process which lacks in traditional, low A‐stage viscosity, benzoxazine resin. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40502.     

Development of a micro-PIXE system using tapered glass capillary optics

The performance of a compact micro-PIXE system using a tapered glass capillary for beam focusing was examined with the help of Monte-Carlo simulations. The effective beam spot size was evaluated by an edge-scanning method and a two-dimensional element mapping was successfully demonstrated by using a copper fine-mesh target. The spatially resolved energy-spectrum measurement revealed that even protons scattered at the inner wall of the capillary have kinetic energies enough to induce the X-ray emission in the target. Monte-Carlo simulations showed that the beam-focusing factors of the capillaries used in this study are about 1.7. The uniformity of the beam does not depend so much on the distance from the capillary outlet, but the beam radius was found to be twice larger than its original size even at 1 mm from the capillary outlet, which was consistent with the effective beam spot size measurement.