Solution of large dense complex matrix equations utilizingwavelet-like transforms

This paper presents the wavelet-like transforms, which are quite different from the wavelet transform for the solution of large dense complex matrix equations. From a purely numerical standpoint, these wavelet-like transforms are not true orthogonal transforms as the condition number of the resulting matrix changes after the thresholding. These effects are illustrated through examples     

Transcritical CO2 Heat Pump Dryer: Part 2. Validation and Simulation Results

The simulation model of a transcritical CO₂ heat pump dryer presented in Part 1 has been first validated with available experimental data in this part and then used to simulate the heat pump dryer to study the variation of performance parameters such as heating COP, moisture extraction rate, and specific moisture extraction rate. The validation with experimental data shows that the model slightly over predicts the system performance. The possible reasons for the difference between experimental and numerical results are explained. Simulation results show the effect of key operating parameters such as bypass air ratio, re-circulation air ratio, dryer efficiency, ambient condition (temperature and relative humidity), and air mass flow rate. Results show that unlike bypass air ratio and ambient relative humidity, the effect of dryer efficiency, recirculation air ratio, ambient temperature, and air mass flow rate are very significant as far as the system performance is concerned.     

Continuous blending of cohesive granular material

Results are presented from discrete element method (DEM) computer simulations of cohesive particles in a periodic slice of a continuous blender. The influence of inter-particle cohesion at various impeller speeds and fill levels is reported. Although increasing cohesion does not significantly change axial flow rates, mixing rates in the transverse plane and axial direction are affected. Mixing is generally enhanced for slightly cohesive materials, but decreases for larger cohesion, similar to trends observed in tumbling batch mixers. Changes in fill level are also shown to affect axial transport rates and mixing. These results suggest that the controllable operating parameters, such as feed rate and impeller speed, may be adjusted for cohesive powder formulations to obtain optimal mixing performance.     

Thermal and Optical Properties of Zn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Te Diluted Magnetic Semiconductor Studied by Photoacoustic Spectroscopic Method

Using photoacoustic spectroscopy, the composition-dependent absorption coefficient (α), thermal diffusivity (σ), and optical bandgap (E _g) of Zn_1−x Mn _x Te diluted magnetic semiconductor have been measured. For higher Mn compositions, the absorption spectrum of the Zn–Mn–Te system consists of three regions, viz., the high absorption region, the exponential region, and the weak absorption tail. The bandgap follows a nonlinear variation with composition, showing a downward bowing with a minimum around x = 0.31 as a consequence of the electro-negativity difference between the substituted atoms. The composition-dependent band-edge effective mass of the carriers does not show the bowing behavior indicating that the momentum matrix is not the same for all the Zn_1−x Mn _x Te alloys due to different lattice constants. The absorption spectra show that the transition is allowed and direct.     

Interesting aspects of the analysis of resistivity in Li irradiated Bi-2212

Differently heat treated and 55 MeV Li³⁺ beam irradiated Bi₂Sr₂Ca₁Cu₂O_8+δ (Bi-2212) high temperature superconductors have been studied from the analysis of resistivity in the normal state as well as near the superconducting transition. For all the unirradiated and irradiated samples the so-called linear temperature dependence of the normal state resistivity, in a wide temperature range, can well be understood within the variable range hopping (VRH) conduction scenario. Near and above the bulk superconducting transition, the fluctuation enhanced conductivity (paraconductivity) analysis shows a noteworthy modification of the conduction process due to radiation induced defects.     

Scalar Variational Analysis of Fundamental Mode in Single-Mode Elliptical Core Fiber Using Super-Gaussian Approximation

We present detailed propagation characteristics of single-mode elliptical core fiber using scalar variational method with novel super-Gaussian approximation. Results obtained through this method for different aspect ratios matched excellently with those reported using other methods.     

Wireless multicast: theory and approaches

We design transmission strategies for medium access control (MAC) layer multicast that maximize the utilization of available bandwidth. Bandwidth efficiency of wireless multicast can be improved substantially by exploiting the feature that a single transmission can be intercepted by several receivers at the MAC layer. The multicast nature of transmissions, however, changes the fundamental relations between the quality of service (QoS) parameters, throughput, stability, and loss, e.g., a strategy that maximizes the throughput does not necessarily maximize the stability region or minimize the packet loss. We explore the tradeoffs among the QoS parameters, and provide optimal transmission strategies that maximize the throughput subject to stability and loss constraints. The numerical performance evaluations demonstrate that the optimal strategies significantly outperform the existing approaches.     

An accurate technique of measurement of a transducer output by using a modified two core saturable reactor

Saturable reactor or transductor used as a magnetic modulator or amplifier for the measurement of the small value DC output signal of a transducer may suffer from error due to the fact that a part of the current drawn from the transducer by the transductor unit is utilized to magnetize the core material. In this paper a modified two core saturable reactor circuit has been proposed to eliminate this error. This unit also minimizes some other errors like common mode error, material error, etc. Theory of operation and design of the circuit has been explained in this paper. The circuit has been tested by using a millivolt input signal as well as a thermocouple to measure temperature. The experimental results are presented in this paper. Linear static characteristic graphs have been observed.     

Selective transport of radio-cesium by supported liquid membranes containing calix[4]crown-6 ligands as the mobile carrier

Facilitated transport of Cs-137 across supported liquid membranes (SLM) containing a calix-crown ligand viz. caliz[4]arene-bis(crown-6) (CC), calix[4]arene-bis(o-benzocrown-6) (CBC) or calix[4]arene-bis(napthocrown-6) (CNC) was investigated. The feed consisted of dilute nitric acid solutions while the carrier solutions contained mainly CNC in several organic diluents inside the pores of polypropylene (PP) as well as PTFE flat sheet membranes. PTFE membranes containing CNC in a diluent mixture of 2-nitrophenyloctyl ether (NPOE) and n-dodecane were found to have high stability. Selectivity studies were carried out using simulated high level waste (SHLW) as well as fission products obtained from an irradiated natural uranium target.