Changes in the Peeled Surfaces of Copper Thin Films Deposited on Polyimide Substrates After Heat Treatment

Peel strength between a copper (Cu) thin film and a polyimide (pyromellitic dianhydride-oxydianiline, or PMDA-ODA) substrate is reduced by heat treatment at 150°C in air. In this work, we investigated the peel strength, the morphology of the interface between Cu films and polyimide substrates using optical microscopy and electron microscopy, and chemical change of the interface using Auger electron spectroscopy (AES) and micro X-ray photoelectron spectroscopy (XPS). The analysis showed that CuO “lumps” were present on the peeled surface of PMDA-ODA after heat treatment at 150°C in air. The peeled surfaces of other polyimide substrates were also analyzed: biphenyl dianhydride-para phenylene diamine (BPDA-PDA) and biphenyl dianhydride-oxydianiline (BPDA-ODA). CuO lumps were present on the peeled surface of BPDA-ODA after the heat treatment, but not that of BPDA-PDA. Compared with the adhesion strength for the Cu thin film, the adhesion strength was high for the Cu/PMDA-ODA and Cu/BPDA-ODA laminates, but the adhesion strength was very low for the Cu/BPDA-PDA laminate. This low strength is the reason that CuO lumps were not detected on the peeled surface of the BPDA-PDA substrate. These CuO lumps were related to the adhesion degradation of the Cu/polyimide laminates after the heat treatment.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

One-Step Oxidation of Benzene to Phenol over Cu/Ti/HZSM-5 Catalysts

The gas-phase catalytic oxidation of benzene over copper supported on HZSM-5 added with titanium (Cu/Ti/HZSM-5) was carried out by using molecular oxygen as an oxidant. Phenol was effectively produced by the titanium addition to Cu/HZSM-5. The titanium addition to Cu/HZSM-5 induces the easy reduction of Cu²⁺ species to Cu⁺ species in the catalysts, and the produced Cu⁺ species seems to produce the phenol effectively.     

Molecular modeling of single polypeptide chain of calcium-binding protein p26olf from dimeric S100B()

P26olf from olfactory tissue of frog, which may be involvedin olfactory transduction or adaptation, is a Ca²⁺-binding proteinwith 217 amino acids. The p26olf molecule contains two homologousparts consisting of the N-terminal half with amino acids 1–109and the C-terminal half with amino acids 110–217. Eachhalf resembles S100 protein with about 100 amino acids and containstwo helix–loop–helix Ca²⁺-binding structural motifsknown as EF-hands: a normal EF-hand at the C-terminus and apseudo EF-hand at the N-terminus. Multiple alignment of thetwo S100-like domains of p26olf with 18 S100 proteins indicatedthat the C-terminal putative EF-hand of each domain containsa four-residue insertion when compared with the typical EF-handmotifs in the S100 protein, while the N-terminal EF-hand ishomologous to its pseudo EF-hand. We constructed a three-dimensionalmodel of the p26olf molecule based on results of the multiplealignment and NMR structures of dimeric S100B(ßß)in the Ca²⁺-free state. The predicted structure of the p26olfsingle polypeptide chain satisfactorily adopts a folding patternremarkably similar to dimeric S100B(ßß). Each domainof p26olf consists of a unicornate-type four-helix bundle andthey interact with each other in an antiparallel manner formingan X-type four-helix bundle between the two domains. The twoS100-like domains of p26olf are linked by a loop with no sterichindrance, suggesting that this loop might play an importantrole in the function of p26olf. The circular dichroism spectraldata support the predicted structure of p26olf and indicatethat Ca²⁺-dependent conformational changes occur. Since theC-terminal putative EF-hand of each domain fully keeps the helix–loop–helixmotif having a longer Ca²⁺-binding loop, regardless of the four-residueinsertion, we propose that it is a new, novel EF-hand, althoughit is unclear whether this EF-hand binds Ca²⁺. P26olf is a newmember of the S100 protein family.     

Fat Bloom Caused by Partial De-Oiling on Chocolate Surfaces after High-Temperature Exposure

Fat bloom in chocolate is a substantial problem that affects its sensory properties, such as texture and appearance. This phenomenon is because of diffuse light reflection on a roughened surface of chocolate, caused by structural changes of fat crystals subjected to various temperature conditions. The purpose of this study is to characterize the fat bloom formed through gradual two-step cooling after exposure to temperatures (35–37 °C) slightly above the cocoa butter Form βV melting point (33.8 °C). To clarify the fat bloom formation process, the structural changes in cocoa butter and on the chocolate surface, at the dynamic thermal condition for bloom formation, was investigated using X-ray diffraction (XRD), fluorescence light microscopy, and scanning electron microscopy (SEM). The results revealed that an entirely light brown fat bloom occurred, even in the absence of the Form βVI or other polymorphic transformation. Microscopic observation showed that the light brown appearance was because of the porous structure on the chocolate surface. This porous structure was formed by liquid oil moving inside of chocolate from the surface. The formation of a coarse network and the subsequent de-oiling, because of movement of unsolidified liquid fat into the chocolate, appeared to be the main causes of bloom formation. Therefore, a coarsened fat network and oil movement besides the conventional principles of polymorphic transformation of cocoa butter should be considered.     

Excess estrogen sulfoconjugation as the possible cause for a poor sign of parturition in pregnant cows carrying somatic cell clone fetuses

We conducted this study to elucidate a factor causing a poor sign of parturition and prolonged gestation, which is frequently observed in cows carrying somatic clone fetuses. Pre-partum rises in concentrations of plasma estrone and estradiol-17beta in the recipient cows pregnant with clones were subtle. By contrast, the plasma concentration of estrone sulfate in clone pregnancies increased gradually from pre-initiation of parturition induction whereas control cows that received in vivo-derived embryos showed a significant increase at parturition. Therefore, in clone pregnancies, the ratio of estrone/estrone sulfate was low during the pre-partum period compared with control. Messenger RNA expression of estrogen sulfotransferase (SULT1E1) in the placenta at parturition was significantly higher in clone pregnancies than control pregnancies and was localized in binucleate cells (BNC). SULT1E1 mRNA abundance was negatively and positively correlated with concentrations of maternal estrone and estrone sulfate at parturition respectively. Messenger RNA expressions of estrogen sulfatase (STS) and aromatase (CYP19) were similar between clone and control pregnancies and were localized in BNC and caruncular epithelial cells. STS and CYP19 mRNA abundances showed positive correlations with maternal estradiol-17beta concentration. The population of BNC in the placenta did not differ between clone and control pregnancies. Plasma cortisol concentration of vaginally delivered newborn clone calves was comparable with those of control, although cesarean section delivered clone calves showed a low concentration. These results suggest that excess estrogen sulfoconjugation is the reason for the perturbed low ratio of active to inactive estrogens and the resulting hormonal imbalance contributes to the lack of overt signs of readiness for parturition in cows pregnant with clones.     

Occurrence of two genotypes of tetracycline (TC) resistance gene tet(M) in the TC-resistant bacteria in marine sediments of Japan

The tetracycline (TC) resistance gene tet(M) was monitored in bacteria isolated from Japanese coastal and off-shore marine sediments. The high rate of occurrence of TC resistant (TC(r)) bacteria (120 microg mL(-1) TC) was observed at frequency ranges between 0.0-0.08% in Tokyo Bay, 1.67-1.82% in Sagami Bay and 0.0-4.35% in the open Pacific Ocean. The tet(M) gene was PCR amplified from the TC(r) isolates, showing 127 of 209 isolates (60.8%) as positive. The rate of occurrence of tet(M) was between 32.0-96.0%, 21.1 -28.0% and 0.0-83.3% in the isolates from Tokyo Bay, Sagami Bay and the open Pacific Ocean, respectively. The tet(M) positive isolates belonged to 4 orders of bacteria. Bacillales was the most dominant order (121 strains) among tet(M) possessing bacteria, followed by Actinomycetales (three strains), Flavobacteriales (one strain) and Pseudomonadales (one strain). This indicates that tet(M) is present in various bacterial species and suggests that marine sediments are a natural reservoir of the tet(M) gene. Nucleotide sequence of the tet(M) revealed that two genotypes of tet(M) were found in the bacteria. The two genotypes were placed in genetically distant branches of the phylogenetic tree, suggesting that the two tet(M)s have different origins.     

Phytoextraction by a high-Cd-accumulating rice: reduction of Cd content of soybean seeds

Soybeans (Glycine max (L) Merr.) are the major summer crop grown in Japanese upland fields (characterized by aerobic soil) that have been converted from paddies. To evaluate the effect of phytoextraction by rice on the seed cadmium (Cd) content of soybeans grown subsequently, we grew Milyang 23, a high-Cd-accumulating rice cultivar, and then grew soybeans in three paddy soils contaminated with moderate Cd concentrations (2.50-4.27 mg Cd kg(-1)). The rice accumulated 7-14% of the total soil Cd in its shoots. The soybean seed Cd contents were 24-46% less than those grown on control soils. Phytoextraction by Milyang 23 rice is thus a promising remediation method for reducing seed Cd contents of soybeans grown on paddy soils under aerobic soil conditions.     

同步辐射X射线衍射与DSC相结合研究油脂的物性及其动力学机理的进展

介绍了将同步辐射X射线衍射和DSC相结合,用于油脂的结构和物化性质研究的新技术,以及在该领域的研究进展。