Synthesis of High Density and Transparent Forsterite Ceramics Using Nano-Sized Precursors and Their Dielectric Properties

Forsterite (Mg₂SiO₄) ceramics were prepared using Mg(OH)₂ and SiO₂ as precursors, and the effect of powder characteristics of Mg(OH)₂ on calcination and sintering was investigated. The use of highly dispersed Mg(OH)₂ powder (HD powder) resulted in a lower calcination temperature. Forsterite powder of high homogeneity and small particle size prepared from the HD powder enabled synthesis of high-density forsterite ceramics by ordinary sintering without applying external pressure. Moreover, transparent forsterite ceramics were successfully synthesized through addition of excess Mg to the precursors to compensate for Mg evaporated during the sintering process. Subsequent dielectric measurements revealed that the transparent forsterite ceramics had a very low dielectric loss (tan δ<10⁻⁴).     

Fat Bloom Caused by Partial De-Oiling on Chocolate Surfaces after High-Temperature Exposure

Fat bloom in chocolate is a substantial problem that affects its sensory properties, such as texture and appearance. This phenomenon is because of diffuse light reflection on a roughened surface of chocolate, caused by structural changes of fat crystals subjected to various temperature conditions. The purpose of this study is to characterize the fat bloom formed through gradual two-step cooling after exposure to temperatures (35–37 °C) slightly above the cocoa butter Form βV melting point (33.8 °C). To clarify the fat bloom formation process, the structural changes in cocoa butter and on the chocolate surface, at the dynamic thermal condition for bloom formation, was investigated using X-ray diffraction (XRD), fluorescence light microscopy, and scanning electron microscopy (SEM). The results revealed that an entirely light brown fat bloom occurred, even in the absence of the Form βVI or other polymorphic transformation. Microscopic observation showed that the light brown appearance was because of the porous structure on the chocolate surface. This porous structure was formed by liquid oil moving inside of chocolate from the surface. The formation of a coarse network and the subsequent de-oiling, because of movement of unsolidified liquid fat into the chocolate, appeared to be the main causes of bloom formation. Therefore, a coarsened fat network and oil movement besides the conventional principles of polymorphic transformation of cocoa butter should be considered.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

A content search system considering the activity and context of a mobile user

People routinely carry mobile devices in their daily lives and obtain a variety of information from the Internet in many different situations. In searching for information (content) with a mobile device, a user’s activity (e.g., moving or stationary) and context (e.g., commuting in the morning or going downtown in the evening) often change, and such changes can affect the user’s degree of concentration on his or her mobile device’s display and information needs. Therefore, a search system should provide the user with an amount of information suitable for the current activity and a type of information suitable for the current context. In this study, we present the design and implementation of a content search system that considers a mobile user’s activity and context, with the goal of reducing the user’s operation load for content search. The proposed system switches between two kinds of content search systems according to the user’s activity: the location-based content search system is activated when the user is stationary (e.g., standing and sitting), while a menu-based content search system is activated when the user is moving (e.g., walking). Both systems present information according to user context. The location-based system presents detailed information via menus and a map according to location-based categories. The menu-based system presents only a few options to enable users to get content easily. Through user experiments, we confirmed that participants could get desired information more easily with this system than with a commercial search system.     

Computing the Maximum Degree of Minors in Matrix Pencils via Combinatorial Relaxation

   Abstract. This paper presents a new algorithm for computing the maximum degree δ _k (A) of a minor of order k in a matrix pencil A(s) . The problem is of practical significance in the field of numerical analysis and systems control. The algorithm adopts a general framework of ``combinatorial relaxation' due to Murota. It first solves the weighted bipartite matching problem to obtain an estimate

A new scaling algorithm for the maximum mean cut problem

We present a new scaling algorithm for the maximum mean cut problem. The mean of a cut is defined by the cut capacity divided by the number of arcs crossing the cut. The algorithm uses an approximate binary search and solves the circulation feasibility problem with relaxed capacity bounds. The maximum mean cut problem has recently been studied as a dual analogue of the minimum mean cycle problem in the framework of the minimum cost flow problem by Ervolina and McCormick. A networkN=(G, lower, upper) with lower and upper arc capacities is said to be -feasible ifN has a feasible circulation when we relax the capacity bounds by ; that is, we use (lower(a)- , upper(a)+) bounds instead of (lower(a), upper(a)) bounds for each arca A. During an approximate binary search we maintain two bounds,LB andUB, such thatN is LB-infeasible andUB-feasible, and we reduce the interval size (LB, UB) by at least one-third at each iteration. For a graph withn vertices, m arcs, and integer capacities bounded byU, the running time of this algorithm is O(mn log(nU). This time bound is better than the time achieved by McCormick and Ervolina under thesimilarity condition (that is,U=O(n^o(1))). Our algorithm can be naturally used for the circulation feasibility problem, and thus provides a new scaling algorithm for the minimum cut problem.Research supported by a grant-in-aid of the Ministry of Education, Science and Culture of Japan.     

Linearized method: A new approach for kinetic analysis of central dopamine D(2) receptor specific binding

We proposed a new method (;linearized method') to analyze neuroleptic ligand-receptor specific binding in a human brain using positron emission tomography (PET). We derived the linear equation to solve four rate constants, k(3), k(4), k(5), k(6) from PET data. This method does not demand a radioactivity curve in plasma as an input function to the brain, and can perform fast calculations in order to determine rate constants. We also tested the nonlinearized method including nonlinear equations which is a conventional analysis using plasma radioactivity corrected for ligand metabolites as an input function. We applied these methods to evaluate dopamine D(2) receptor specific binding of [(11)C] YM-09151-2. The value of B(max)/K(d)=k(3)/k (4) obtained by the linearized method was 5.72+/-3.1 which was consistent with the value of 5.78+/-3.4 obtained by the nonlinearized method.     

Effects of subject- versus experimenter-selected reinforcers on the behavior of individuals with profound developmental disabilities

Results from a number of studies have shown that individuals with profound developmental disabilities often show differential approach behavior to stimuli presented in a variety of formats, and that such behavior is a reasonably good predictor of reinforcement effects when these "preferred" stimuli are used subsequently in a contingent arrangement. Recent data suggest that reinforcement effects may be enhanced further by allowing individuals to select, just prior to training sessions, which (of several) preferred stimuli would be used as reinforcers, but whether this method is superior to one based on selection by a teacher or therapist has not been adequately addressed. We compared the effects of these two methods of reinforcer selection on rates of responding on a free-operant task, using stimuli previously identified as potential reinforcers. Results obtained with 4 subjects indicated little or no difference in reinforcement effects when stimuli were selected by subjects rather than experimenters. Implications of these results with respect to choice and its relation to reinforcement are discussed.     

Disposition of diadenosine 5',5"'-P1,P4-tetraphosphate (Ap4A) in rats

The disposition of diadenosine 5'5"'-P1,P4-tetraphosphate (Ap4A), an endogenous dinucleotide, was investigated in rats. The degradation of Ap4A in rat plasma was very rapid and could be explained by a Michaelis-Menten equation: Km and Vmax values were 1.69 micrograms/ml and 4.32 micrograms/min/ml, respectively. Ap4A was degraded in rat plasma to ATP and AMP, but not to 2 ADP molecules, and these nucleotides were further degraded through adenosine. The degradations kinetics were examined. After intravenous bolus injection, Ap4A in plasma declined rapidly and the rate of elimination was dose-dependent: the biological half-life was about 3s at the dose of 1 mg/kg and was longer at 3 mg/kg. When Ap4A was administered by intravenous infusion (0.5 or 1.0 mg/kg/min), the plasma level rapidly reached a steady-state, which then rapidly declined after stopping the infusion.