Effect of drawing condition on mechanical properties and molecular orientation of self-reinforced poly(lactic acid) screws

Effects of extrusion ratio (ER) during extruding on mechanical properties of poly(lactic acid) (PLA) screws were investigated in terms of shear and twist strength. Shear strength increased by drawing, while twist strength decreased. This might be due to orientation of molecular chains during drawing. In order to evaluate orientation of molecular chains, orientation function in extruded billets was measured as a function of ER. Since orientation function increased with ER, drawing is effective method to improve shear strength of screw, where fibrous structure which was formed during extruding resisted shear stress in cross-section perpendicular to screw axis. Although orientation functions for billet extruded at ER 1.3–4 were equivalent, both strengths changed for the screw extruded at the range of this ER. Infrared spectra suggested transforming from α to β crystal for the billet extruded at the range of this ER. This result suggested that mechanical properties of screw also depended on the crystal forms.     

Investigation report of geotechnical disaster on river area due to typhoon landfall three times on Okhotsk region,Hokkaido, Japan

For one week from August 17 to 23, 2016, three consecutive typhoons made landfall in Hokkaido for the first time on record. These typhoons and the front they stimulated brought record-breaking torrential rain over the eastern part of Hokkaido. To investigate the damage to grounds and rivers resulting from this rainfall, the Japan Society of Civil Engineers (JSCE) and the Japanese Geotechnical Society (JGS) formed a disaster research group to conduct an investigation. This report provides the results of the investigation into damage to the grounds of areas along the Tokoro River of the Okhotsk region, Hokkaido, that suffered from this tremendous and diverse disaster. Specifically, the report describes the situation of the levees which were broken and eroded by the overflowing water, the shape of the levee bodies, the levee body soil properties examined by observation of the sections, as well as the occurrence of sand boiling and air blows. The washout of road embankments as well as damage to road bridge mounting fills and abutment backfills were also investigated. The investigation has demonstrated the need to clarify the resistance of the abutment backfills and levee bodies to flowing water as well as the geotechnical predominant factors in order to clarify the mechanisms behind erosion and washout, the need to review new measures that allow for the scale of sand boiling and resultant changes in levee body stability, and the fact that the existing embankments were able to temporarily suppress the flooding water which had spilled over from the river. Furthermore, although it has been identified that the findings of a study on an embankment washout associated with a tsunami can be applied to measures taken against the overflowing water, it has also been found necessary to clarify the predominant geotechnical factors using model tests and to use a more sophisticated analytical approach to establish a geotechnical stability review as soon as possible in order to prevent the levees and embankments from being eroded and washed out due to overflowing water.     

Preparation of microporous polypropylene sheets containing CaCO3 filler: Effect of draft ratio

Microporous polypropylene sheets were prepared as follows. First, polypropylene pellet-containing CaCO₃ filler was extruded to prepare base sheets, which were then biaxially stretched. The draft effect at the extrusion process was studied in relation to some properties of the resultant microporous polypropylene sheets. © 1996 John Wiley & Sons, Inc.     

Microporous polypropylene fibers containing poly(methylsilsesquioxane) filler

Microporous polypropylene fibers were prepared by stretching polypropylene fibers containing poly(methylsilsesquioxane) filler. The properties of the resultant fibers are controllable by adjusting the filler content and stretching degree. The resultant fibers have a fine texture of polypropylene fibrils, in which the filler particles are dispersed. Some properties were investigated: tensile strength, elongation, Young's modulus, porosity, pore size, and specific surface area. © 1996 John Wiley & Sons, Inc.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.     

Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.     

Applications of microstructures fabricated by proton beam writing to electric-micro filters

Fabrication of high-aspect-ratio microstructures was performed by proton beam writing (PBW) using a microbeam line at Takasaki Ion Accelerators for Advanced Radiation Application (TIARA), JAEA Takasaki, JAPAN. As one of the applications of the high-aspect-ratio structures micro-machined by PBW, we utilized the high-aspect pillars for electric-micro filters of microbes such as Escherichia coli and Yeast based on the dielectrophoretic force. The filter is equipped with high-aspect pillars with a height of ～20 μm and a diameter of ～1 μm on a glass plate. Evaluation of the dielectrophoresis (DEP) device for capturing E. coli and Yeast was made using either observation by optical microscope or photoluminescence (PL) measurements.     

Detail analysis of fusion neutronics benchmark experiment for iron

In order to specify the best nuclear data on iron, the fusion neutronics benchmark experiment on iron at Japan Atomic Energy Agency (JAEA)/Fusion Neutronics Source (FNS) was analyzed in detail with MCNP-4C and the latest nuclear data libraries, JENDL-3.3, FENDL-2.1, JEFF-3.1 and ENDF/B-VII.0. As a result, totally the calculation result with ENDF/B-VII.0 agreed with the measurement best, except that it underestimated the measured neutron flux above 10 MeV with the depth. It was noted that the calculation result with JENDL-3.3 overestimated the measured neutrons below a few keV. Through the DORT calculations based on the iron data in ENDF/B-VII.0, it was found out that the first inelastic scattering cross-section data of ⁵⁷Fe in JENDL-3.3 caused the overestimation.