Nickel‐Catalyzed Suzuki–Miyaura Coupling of a Tertiary Iodocyclopropane with Wide Boronic Acid Substrate Scope: Coupling Reaction Outcome Depends on Radical Species Stability

We describe a nickel‐catalyzed Suzuki–Miyaura arylation of a tertiary iodocyclopropane with arylboronic acids; this is an efficient and convergent strategy for providing various enantioenriched arylcyclopropanes with a quaternary stereogenic center. This is the first metal‐catalyzed coupling between a tertiary alkyl electrophile and a wide range of aromatics, including heteroaromatics. We found that the outcome of the Ni‐catalyzed coupling with halides as electrophiles was dependent on the stability of the radical species formed during the reaction. The use of tert‐butyl alcohol (t‐BuOH) as the reaction solvent was very effective, because of its stability under the radical‐generating reaction conditions.

     

Direct Injection of CRISPR/Cas9-Related mRNA into Cytoplasm of Parthenogenetically Activated Porcine Oocytes Causes Frequent Mosaicism for Indel Mutations

Some reports demonstrated successful genome editing in pigs by one-step zygote microinjection of mRNA of CRISPR/Cas9-related components. Given the relatively long gestation periods and the high cost of housing, the establishment of a single blastocyst-based assay for rapid optimization of the above system is required. As a proof-of-concept, we attempted to disrupt a gene (GGTA1) encoding the α-1,3-galactosyltransferase that synthesizes the α-Gal epitope using parthenogenetically activated porcine oocytes. The lack of α-Gal epitope expression can be monitored by staining with fluorescently labeled isolectin BS-I-B₄ (IB4), which binds specifically to the α-Gal epitope. When oocytes were injected with guide RNA specific to GGTA1 together with enhanced green fluorescent protein (EGFP) and human Cas9 mRNAs, 65% (24/37) of the developing blastocysts exhibited green fluorescence, although almost all (96%, 23/24) showed a mosaic fluorescent pattern. Staining with IB4 revealed that the green fluorescent area often had a reduced binding activity to IB4. Of the 16 samples tested, six (five fluorescent and one non-fluorescent blastocysts) had indel mutations, suggesting a correlation between EGFP expression and mutation induction. Furthermore, it is suggested that zygote microinjection of mRNAs might lead to the production of piglets with cells harboring various mutation types.     

Possibilities of the Formation of Enol-Ethers in Lignin by Soda Pulping

In the alkaline decomposition of a β-O-4 type lignin model compound (erythro-guaiacylglycerol-β-guaiacyl ether, compound 1), an isomeric pair of C₆C₂ enol-ether (2-methoxy-4-[2-(2-methoxyphenoxy)-vinyl]-phenol, compound 2) was detected as the main decomposition product with no trace of C₆C₃ enol-ether (4-[3-hydroxy-1-(2-methoxyphenoxy)-propenyl]-2-methoxy-phenol, compound 3) or other dimers. In contrast, compound 2 was not detected in the alkaline decomposition products of compound 3. Under alkaline conditions, the γ-hydroxymethyl group of compound 3 was reduced to form 2-methoxy-4-[1-(2-methoxyphenoxy)-propenyl]-phenol (compound 4). In the HSQC analysis of soda lignin, the formation of substructures of C₆C₂ type enol-ether (related to compound 2) was confirmed. However, no substructures related to compound 4, which could be formed if a substructure of C₆C₃ type enol-ether was formed under alkaline conditions, were detected. Therefore, it could be concluded that C₆C₃ type enol-ethers could not be intermediates of alkaline decomposition products of lignin.     

125Te, 27Al, and 71Ga NMR Study of M2O3–TeO2 (M = Al and Ga) Glasses

The structures of M₂O₃–TeO₂ (M = Al and Ga) glasses have been investigated by means of ¹²⁵Te, ²⁷Al, and ⁷¹Ga NMR spectroscopies. The structural units of respective cations in M₂O₃–TeO₂ glasses were quantitatively analyzed. The fractions of TeO₄ trigonal bipyramid, AlO₆ and GaO₆ octahedra decreased and those of TeO₃ trigonal pyramid, AlO₄, AlO₅, and GaO₄ polyhedra increased with increasing M₂O₃ content. Based on the local structures around Te, Al, and Ga atoms, the structure models of M₂O₃–TeO₂ glasses were proposed.     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

The fracture toughness of inorganic glasses

Measuring the fracture toughness (K_Ic) of glasses still remains a difficult task, raising experimental and theoretical problems as well. The available methods to estimate K_Ic are reviewed, with emphasis on their respective advantages and drawbacks. In view of our current understanding, this analysis gives precedence to the SEPB method. The ultimate glass strength, the critical flaw size, and the indentation load for the onset of crack initiation are discussed, in the light of the fundamentals of fracture mechanics and classical background regarding the mechanics of brittle materials. Analytical expressions were further proposed to predict the fracture energy and fracture toughness of glasses from different chemical systems from their nominal compositions. The theoretical values were compared with the experimental ones, as obtained by self‐consistent methods when available. The agreement observed in most cases suggests that measured K_Ic values correspond to the crack propagation regime (as opposed to the crack initiation threshold), and supports previous investigations in glasses and ceramics, which showed that a crack tip is nearly atomically sharp in these materials (but for metallic glasses). Some ideas to design tougher glasses are finally presented.     

Synergistic Extraction of Am(III) and Eu(III) by Tris(2‐pyridylmethyl)Amine with Various Anions in 1,2‐Dichloroethane

The extraction equilibria of Am(III) and Eu(III) by using a tripodal ligand, tris(2‐pyridylmethyl)amine (tpa), with various lipophilic anions have been investigated. The extractability of both Am(III) and Eu(III) was increased by the combination of tpa and counteranions due to a synergistic effect. The separation factors between Am(III) and Eu(III) were also increased from 7.6 to 49 by the combination of counteranions and organic solvents. The extraction equilibria of Am(III) and Eu(III) with tpa in 1,2‐dichloroethane were determined by slope analysis. It was found that three anions and one molecule of the ligand coordinated to Am(III) and Eu(III) was extracted regardless of the anions.     

A Novel Method of Measuring Moisture Content Distribution in Timber During Drying Using CT Scanning and Image Processing Techniques

A new method for the nondestructive measurement of moisture content (MC) distribution in timber during drying was developed using X-ray computed tomography (CT) scanning and image processing techniques. The deformed cross section in the CT images due to shrinkage was corrected with the image registration, and the shrinkage was measured by digital image correlation analysis. The pixel-wise MC distributions during drying were measured and visualized successfully. The total timber MC estimated from the MC values of each pixel were strongly correlated with those measured by calculation without geometrical transformation of CT images. The coefficient of determination (R ²) and the standard error of prediction (SEP) were 0.99 and 0.18%, respectively, within the MC range of 19.2–47.3%. In addition, the measured shrinkage distribution during drying was in accordance with the diamonding deformation observed. The results suggest that CT scanning combined with image processing techniques is an effective tool for nondestructive assessment of MC distribution during drying.     

Theoretical and Experimental Study of Water Transport in a Hollow Cylinder Applied to the Drying of Round Squid Mantle

ABSTRACT

Until now, attention has been focused solely in the drying of squid mantle from an experimental point of view, neglecting the transport phenomenon studies of water in squid muscle. This work studies the drying of squid mantle (Loligo brasiliensis), previously salted and smoked by liquid smoking (hickory extract), using a tubular dryer in closed cycle with a silicagel fixed bed in series. The mass transfer phenomenon during drying was studied, based on the Fick's second law, with the effective diffusivity supposed constant, which enabled an analytical solution to the problem. The drying curve calculated with the resulting equation was compared with experimental data. The model was applied to a hollow cylinder geometry (round squid mantle), with its internal surface isolated from the drying environment by a plastic film. The latter was given a tubular form and introduced inside the mantle cavity (impervious wall boundary condition).