Optimally sized hybrid energy system for auxiliaries of a cement manufacturing unit with diesel fuel price sensitivity analysis

Prices of fuels such as coal and diesel are showing uptrend continuously in India due to which the manufacturing sector is finding it hard to control the production cost. The manufacturing units are emphasising upon innovative practices to reduce the electrical energy consumption in order to reduce production cost. They are recognising renewable energy as one of the options to save fuel cost to some extent by running some partial load on this energy. This paper is presenting a technical and economic analysis for proposing a hybrid renewable energy system, comprising Solar Photovoltaic, wind, a storage battery and a diesel unit, for running auxiliary load of a cement manufacturing unit located in Durg district of Chhattisgarh, India. As the diesel prices are continuously increasing almost rupees 0.5 per month in India for the last few months, the diesel price sensitivity analysis is also done for optimal system sizing. The results show that diesel price increment from $1.01 to $1.09 does not affect optimal system size but only net present cost and levelised cost of energy. When diesel price increases beyond $1.09, the optimal system size increases resulting in capital cost increment. It attains a new optimal system size at a diesel price of $1.13.     

Identification of phenolic profiles,fatty acid compositions,antioxidant activities,and enzyme inhibition effects of seven wheat cultivars grown in Turkey: A phytochemical approach for their nutritional value

In the present article, seven wheat cultivars (Ahmetaga, Bezostaya, Dagdas-94, Ekiz, Karahan-99, Konya-2002, and Tosunbey) grown in Turkey were compared for their phytochemical composition, antioxidant, and enzyme inhibitory activities. Antioxidant capacities and enzyme inhibitory effects were investigated with colorimetric methods. Total phenolic content ranged from 40.71 to 86.34 mg of gallic acid equivalent/100 g wheat grain. Tosunbey (92 mg Trolox equivalent/100 g wheat grain) and Ahmetaga (114.56 mg Trolox equivalent/100 g wheat grain) cultivars exhibited strong 2,2 azino-bis (3-ethylbenzothiazloine-6-sulfonic acid) and 1,1-diphenyl-2-picrylhydrazyl free radical scavenging activities. As compared to other wheat cultivars, Tosunbey cultivar had remarkable both antioxidant and enzyme inhibitory effects with the highest level of phenolics. Ferulic acid, chlorogenic acid, and apigenin were the major phenolics in extracts tested. This study suggested that an increased intake of wheat derived products could represent an effective strategy for the management of oxidative stress related chronic and degenerative diseases such as Alzheimers and diabetes mellitus.     

Structural,microstructural and magneto-electric properties of single-phase BiFeO3 nanoceramics prepared by auto-combustion method

Polycrystalline nano BiFeO₃ powders were synthesized by auto-combustion method using urea as fuel and metal nitrates (Fe(NO₃)₃·9H₂O, Bi(NO₃)₃·5H₂O) as oxidizers. In order to optimize the single-phase synthesis condition of BiFeO₃, different fuel to oxidizer ratios have been investigated. The preliminary structural investigation using X-ray diffraction shows the samples were of single phase and crystallize in rhombohedral structure (R3c). The ferroelectric and antiferromagnetic ordering temperatures of BiFeO₃ were found to be 832 °C and 364 °C respectively, from differential thermal analysis. The temperature dependent dielectric study shows an anomaly around 215 °C which corresponds to magneto-electric coupling in the material. Field-emission scanning electron micrographs show effect of fuel to oxidizer ratio on grain size evolution. The ferroelectric hysteresis loops for all the samples were measured at a frequency of 100 Hz confirming the ferroelectric nature. An evidence of magneto-electric coupling was also observed at room temperature from magneto-capacitance measurements.     

Top Food Sources Contributing to Vitamin D Intake and the Association of Ready-to-Eat Cereal and Breakfast Consumption Habits to Vitamin D Intake in Canadians and United States Americans

Abstract: This study aimed to determine dietary vitamin D intake of U.S. Americans and Canadians and contributions of food sources to total vitamin D intake. Total of 7‐ or 14‐d food intake data were analyzed for vitamin D by a proprietary nutrient assessment methodology that utilized food intake data from the Natl. Eating Trends^® service, portion size data from NHANES 1999–2004, and nutrient values using the Univ. of Minnesota's Nutrition Data System for Research software. Study participants were 7837 U.S. Americans and 4025 Canadians, ≥2‐y‐old males and females. The main outcome measures were total dietary vitamin D intake, percent contribution of foods to total vitamin D intake, and vitamin D intake by cereal and breakfast consumption habits. ANOVA was used to determine differences in means or proportions by age and gender and according to breakfast consumption habits. Mean vitamin D intake ranged from 152 to 220 IU/d. Less than 2% of participants in all age groups from the United States and Canada met the 2011 Recommended Daily Allowance (RDA) for vitamin D from foods. Milk, meat, and fish were the top food sources for vitamin D for both Americans and Canadians. Ready‐to‐eat (RTE) cereal was a top 10 source of vitamin D for Americans but not Canadians. Vitamin D intake was higher with more frequent RTE cereal and breakfast consumption in both countries, largely attributable to greater milk intake. Practical Application: Most U.S. Americans and Canadians do not meet the 2011 Inst. of Medicine recommended daily allowance (RDA) for vitamin D for their age groups from foods. Increasing breakfast and cereal consumption may be a useful strategy to increase dietary vitamin D intake to help individuals meet the RDA for vitamin D, particularly by increasing milk intake. However, it is likely that additional food fortification or vitamin D supplementation is required to achieve the RDA.     

Effect of Superficially Applied Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Coating on High-Temperature Corrosion Behavior of Ni-Base Superalloys

Inhibitors and oxide additives have been investigated with varying success to control high-temperature corrosion. Effect of Y₂O₃ on high-temperature corrosion of Superni 718 and Superni 601 superalloys was investigated in the Na₂SO₄-60 pct V₂O₅ environment at 1173 K (900 °C) for 50 cycles. Y₂O₃ was applied as a coating on the surfaces of the specimens. Superni 601 was found to have better corrosion resistance in comparison with Superni 718 in the Na₂SO₄-60 pct V₂O₅ environment. The Y₂O₃ superficial coating was successful in decreasing the reaction rate for both the superalloys. In the oxide scale of the alloy Superni 601, Y and V were observed to coexist, thereby indicating the formation of a protective YVO₄ phase. There was a distinct presence of a protective Cr₂O₃-rich layer just above the substrate/scale interface in the alloy. Whereas Cr₂O₃ was present with Fe and Ni in the scale of Superni 718. Y₂O₃ seemed to be contributing to better adhesion of the scale, as comparatively lesser spalling was noticed in the presence of Y₂O₃.     

Utilization of green seed canola oil for in situ epoxidation

Green seed canola oil is underutilized for edible purposes due to its high chlorophyll content, which makes it more susceptible to photo‐oxidation and ultimately reduces the oxidation stability. The present work is an attempt to compare the kinetics of epoxidation of crude green seed canola oil (CGSCO) and treated green seed canola oil (TGSCO) with peroxyacids generated in situ in presence of an Amberlite IR‐120 acidic ion exchange resin (AIER) as catalyst. Among the two oxygen carrier studied, acetic acid was found to be a better carrier than the formic acid, as it gives 8% more conversion of double bond than the formic acid. A detailed process developmental study was then performed with the acetic acid/AIER combination. For the oils under investigation parameters optimized were temperature (55°C), hydrogen peroxide to double bond molar ratio (2.0), acetic acid to double bond molar ratio (0.5), and AIER loading (15%). An iodine conversion of 90.33, 90.20%, and a relative epoxide yield of 90, 88.8% were obtained at the optimum reaction conditions for CGSCO and TGSCO, respectively. The formation of the epoxide product of CGSCO and TGSCO was confirmed by Fourier Transform IR Spectroscopy (FTIR) and NMR (1H NMR) spectral analysis.     

Hot Corrosion Behaviour of Detonation-Gun Sprayed Cr3C2–NiCr Coating on Inconel-718 in Molten Salt Environment at 900 °C

Detonation gun sprayed Cr₃C₂–NiCr coating was deposited on nickel-based superalloy Inconel-718. Hot corrosion studies were conducted on uncoated as well as Cr₃C₂–NiCr coated superalloy in 75 wt% Na₂SO₄ + 25 wt% NaCl salt environment at 900 °C for 50 cycles. The thermo-gravimetric technique was used to establish kinetics of corrosion. X-ray diffraction and scanning electron microscopy/energy-dispersive X-ray analysis techniques were used to analyze the corrosion products. The uncoated superalloy suffered intense spalling, while the Cr₃C₂–NiCr coating provided good protection against hot corrosion in the given salt environment.     

Characterization and Modeling of Laser Micromachined Periodically Corrugated Metallic Terahertz Wire Waveguides

Finite element method simulations of periodically corrugated metal terahertz wire waveguides have been conducted with concurrent analysis done on both the near-field confinement properties and the far-field emission properties at the end of the waveguides. This modeling was used to guide the choice of design parameters for the fabrication of waveguides with laser micromachining. The waveguides were characterized with a fiber-coupled terahertz time-domain spectroscopy and imaging system. The propagation properties as well as the frequency dependent diffraction at the end of the wire waveguides were examined and compared to straight, non-engineered metallic wire waveguides.