Fatigue Crack Nucleation Studies on Sulfuric Acid Anodized 7075-T73 Aluminum

The influence of a sulfuric acid anodic coating process on the fatigue crack nucleation behavior of 7075-T73 aluminum alloy was investigated. Silicone surface replication in combination with carbon sputter coating and scanning electron microscopy (SEM) allowed for in situ monitoring of the number of cycles for crack nucleation. A single edge circular notch (SECN) coupon was designed for the present study to localize fatigue damage thus enhancing fatigue crack detection and capture the effects of multiaxial stress conditions indicative of a majority engineering applications. Linear elastic finite element modeling of the SECN coupon was performed to quantify the von Mises equivalent stress distribution and the stress concentration factor of the notched region. The experimental results indicate that the presence of localized pitting corrosion initiated during the anodic coating pretreatment process had an adverse effect on fatigue performance. Specifically, multiple crack nucleation sites were evident as opposed to a single crack origin for the untreated specimens. Post-cycling SEM surface examinations displayed networks of micro-cracks in the anodic coating emanating from the pits although these were not found to be fatigue crack origin sites during post SEM fractographic exams. Thus, the stress concentration effect of the corrosion pits was found to be predominant. The total cycles to failure on average was reduced by approximately 60% for the anodic coated versus untreated specimens. A strategy is also discussed on how to mitigate accelerated crack nucleation by controlled surface pretreatment and use of a chromated chemical conversion coating in lieu of an anodic coating for selective applications.     

Disaster-aware service provisioning with manycasting in cloud networks

Cloud services delivered by high-capacity optical datacenter networks are subject to disasters which may cause large-area failures, leading to huge data loss. Survivable service provisioning is crucial to minimize the effects of network/datacenter failures and maintain critical services in case of a disaster. We propose a novel disaster-aware service-provisioning scheme that multiplexes service over multiple paths destined to multiple servers/datacenters with manycasting. Our scheme maintains some bandwidth (i.e., degraded service) after a disaster failure vs. no service at all. We formulate this problem into a mathematical model which turns out to be an Integer Linear Program (ILP), and we provide heuristic optimization approaches as ILP is intractable for large problem instances. Numerical examples show that exploiting manycasting by intelligently selecting destinations in a risk-aware manner for service provisioning offers high level of survivability against link and node failures that may be caused by disasters and post-disaster failures at no extra cost compared to the other survivable schemes.     

可持续性加工中的微量润滑技术

环境问题、成本压力以及对高质量的期望不仅对发达的工业国家,也对其他快速发展中的国家(如中国)提出了不断挑战,即需要一种可持续的现代加工工艺.微量润滑是一种拥有更好的可持续性,可以节约与冷却润滑相关费用的关键技术,同时还能提高切削加工的整体性能,显著减少冷却润滑液对生产系统所有部件的影响.为了确保微量润滑加工工艺的效率及其成功应用,需要对切削参数、切削刀具、机床以及生产环境进行详细分析和匹配.     

离子注入后品圆清洗带来的材料和掺杂剂损失的测量

对45nm及以下技术节点的逻辑器件嗣造来说,经过次数不断增加的高剂量离子注入光阻层的清洗步骤后,仍保持超浅结（USJ）的完整性非常重要。在PMOS区采用SiGe带来了材料方面的又—挑战。一种新型短循环法可精确测量各种去胶储洗工艺造成的非晶硅或SiGe的损失量。     

Improved catalytic activity by catalase immobilization using γ‐cyclodextrin and electrospun PCL nanofibers

Nanofibrous structures are promising for biocatalyst immobilization due to their large surface area which facilitates the enzyme attachment, stability, ease of separation, and fine porous structure. There is limited research available on the change in enzyme activity following interaction with cyclodextrin. In this study, catalase enzyme was immobilized into nanofibrous structures by various techniques, with and without γ‐CD addition, and the enzymatic activity of catalase was evaluated. In addition, catalase‐γ‐CD complex containing PEO polymer solution was electrospun in between PCL nanofibrous layers as a newly developed technique. The enzyme immobilized nanofibrous structures were characterized by SEM, XRD, and FT‐IR analysis methods. Among all the activity tests, best enzyme activity was recorded with catalase‐γ‐CD physical mixture encapsulated PCL nanofibrous layers. Moreover, the test results indicated that the use of cyclodextrin in immobilization process considerably improves the catalytic activity of the enzyme. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44404.     

Effect on exhaust emissions by the use of methylcyclopentadienyl manganese tricarbonyl (MMT) fuel additive and other lead replacement gasolines

This paper examines the potential effects on car exhaust emissions of a range of alternative lead replacement gasolines in the context of south European countries such as Greece. The main objective of this study was to assess the effects on emissions from non-catalyst passenger vehicles by the substitution of leaded ('super') gasoline with Euro95 unleaded enriched with the additive MMT or other alternative to leaded gasoline fuels. Regulated emissions, two non-regulated pollutants and vehicle performance were measured on two catalyst-equipped and two conventional, non-catalyst vehicles. It was found that there was no measurable effect on regulated emissions (CO, HC and NO(x)) and on fuel consumption by the introduction of the lead replacement fuels for both catalyst and non-catalyst cars. In the case of the non-catalyst car, the shift from leaded to unleaded gasoline was associated with an increase in benzene and formaldehyde emissions, a trend probably attributable to the increased aromatics content of the lead replacement fuels.     

Three-dimensional self-assembly of spherical block copolymer domains into V-shaped grooves

The self-assembly of a spherical-morphology block copolymer into V-shaped grooves has been investigated. Although spherical morphology block copolymers typically form a bcc sphere array in bulk, the V groove promotes the formation of a well-ordered fcc close-packed sphere array with the (111) planes of the array parallel to the groove walls. The sphere size in the block copolymer adjusts depending on the commensurability between the periodicity of the block copolymer and the film thickness within the V groove. The top surface of the close-packed array, parallel to the substrate, shows a square symmetry, unlike the hexagonal symmetry seen in monolayers of spherical domains, which may provide a useful geometry for block copolymer lithography.     

The impact of data aggregation on the performance of wireless sensor networks

With the increasing need for different energy saving mechanisms in Wireless Sensor Networks (WSNs), data aggregation techniques for reducing the number of data transmissions by eliminating redundant information have been studied as a significant research problem. These studies have shown that data aggregation in WSNs may produce various trade‐offs among some network related performance metrics such as energy, latency, accuracy, fault‐tolerance and security. In this paper, we investigate the impact of data aggregation on these networking metrics by surveying the existing data aggregation protocols in WSNs. Our aim is twofold: First, providing a comprehensive summary and comparison of the existing data aggregation techniques with respect to different networking metrics. Second, pointing out both the possible future research issues and the need for collaboration between data management and networking research communities working on data aggregation in WSNs. Copyright © 2006 John Wiley & Sons, Ltd.     

Adaptive streaming of multi-view video over P2P networks

In this paper, we propose a novel solution for the adaptive streaming of 3D representations in the form of multi-view video by utilizing P2P overlay networks to assist the media delivery and minimize the bandwidth requirement at the server side. Adaptation to diverse network conditions is performed regarding the features of human perception to maximize the perceived 3D. We have performed subjective tests to characterize these features and determined the best adaptation method to achieve the highest possible perceived quality. Moreover, we provide a novel method for mapping from scalable video elementary stream to torrent-like data chunks for adaptive video streaming and provide an optimized windowing mechanism that ensures timely delivery of the content over yanl?? gibi. The paper also describes techniques generating scalable video chunks and methods for determining system parameters such as chunk size and window length.     

奥氏体不锈钢在干切削和微量润滑条件下的切削力的研究

金属切削加工中冷却润滑液的使用会增加加工成本,污染环境,而干切削和近干切削可以彻底消除或极大地减少冷却润滑液的使用,所以其成为许多单位研究热点.近来奥氏体不锈钢在各行业内应用越来越广,为了充分了解奥氏体不锈钢的切削性能,本文对奥氏体不锈钢0Cr18Ni9在传统乳化剂、干车削和微量润滑车削条件下进行切削试验,通过设计多因素正交试验方法,建立压电式测力系统测量切削过程中的动态平均切削力,在不同的冷却润滑方式下,比较背吃刀量、切削速度、进给量等切削用量对切削力的影响,得出各个因素的影响曲线图,从而揭示奥氏体不锈钢0Cr18Ni9在车削过程中的切削力变化情况,为实际的生产加工积累和提供基础数据.