Comparative reactivities of coal asphaltenes during hydropyrolysis

Comparisons have been drawn in the relative reactivities of three coal asphaltenes during hydropyrolysis. All were derived from hydrogen donor-solvent extracts of bituminous coal, but had different hydrotreatment histories and different carbon contents (87.1, 91.9 and 90.8 wt% for asphaltenes 1, 2 and 3, respectively). The hydropyrolyses were carried out in the presence of CoO–MoO₃ catalyst and gaseous hydrogen at 8.7 MPa. For two of the asphaltenes (1 and 2) systematic comparisons were made for different reaction times at 425°C; for all three asphaltenes comparisons were made for l h of hydropyrolysis at 425°C. The general pattern of asphaltenes conversion indicated that more pentane-soluble product was produced from asphaltene isolated from straight coal extract (asphaltene 1). For the asphaltenes isolated from hydrotreated extracts, the extent of conversion to liquids was limited when the carbon content was high (asphaltene 2) although the pattern of conversion was similar in the other hydrotreated asphaltene (asphaltene 3). The aliphatic content of the liquid products formed was low, and the distribution of hydrogenated species in the highly aromatic liquid products indicated that complete hydrogenation of the polyaromatics produced in pyrolysis is difficult. Altogether the aliphatics made up ≈ 10 wt% of the asphaltene 1 hydropyrolysate. Aromatic hydrocarbons made up 90% of the liquid product. Phenanthrene, pyrene and anthracene were prominent, and the largest component in the mixture was phenanthrene which, together with other polyaromatics such as fluoroanthene, dominated the liquid product.     

Persistence of nonprotein seed amino acid s-(β-carboxyethyl)-cysteine in young leaves ofCalliandra rubescens Ecological implications

The insecticidal nonprotein amino acid S-(-carboxyethyl)-cysteine (S-CEC) is the major free amino acid in the seeds of severalCalliandra spp. where it accounts for up to 2.9 % of dry weight. Lesser amounts of other related S-containing amino acids and an array of nonprotein imino acids derived from pipecolic acid are other constituents. High concentrations of imino acids, which also show insecticidal activity, are maintained in the mature leaves, but sulfur compounds are lacking. In this study the disappearance of S-CEC from the germinating seeds and young seedlings ofC. rubescens was monitored over time. After 10 weeks, S-CEC continues to be found in high concentrations in the stems and new leaves. As young leaves mature, sulfur compounds quickly decrease in concentration. Traces of S-CEC are found in new leaves of plants up to nine months after germination. Whether high concentration of S-CEC in young leaves is due to transportation from the seed or de novo synthesis is unclear. The ecological implications are discussed.     

Preparation of stable polyurethane-polystyrene copolymer emulsions via RAFT polymerization process

Stable polyurethane-polystyrene (PU-PS) copolymer emulsions were prepared by the polymerization of 2-hydroxyethyl acrylate (HEA)-capped PU macromonomer and styrene, using azobis(isobutyronitrile) (AIBN), a radical initiator, and 4-((benzodithioyl)methyl)benzoic acid, a reversible addition-fragmentation chain transfer (RAFT) agent. As the molar ratio of the RAFT agent to AIBN increased, the zeta potential of the resulting copolymer emulsion increased, but the average size and size distribution of the emulsion droplets decreased. A living polymerization of HEA end-capped PU macromonomer and styrene was characterized by a linear increase in the molecular weight and decrease in the molecular weight distribution with consumption of monomers. The tensile strength, hardness and water-resistance of the copolymer films, prepared from the PU-PS copolymer emulsions, were much greater than those of the films prepared from the pure PU emulsion. The copolymer emulsions, prepared via the RAFT polymerization process, are expected to exhibit better storage stability than those prepared via the conventional free radical polymerization process, due to the presence of carboxyl groups derived from the RAFT agent at the PS block termini.     

Coupling granule properties and granulation rates in high-shear granulation

It is possible to link granulation rates to granule properties. The linkage is by multiple dimension population balance equations that, by means of simplifying assumptions, can be reduced to multiple one-dimensional (1-D) population balance equations (PBEs). Using simple physically based models, this paper demonstrates how multiple one-dimensional population balance equations can describe the results of high-shear granulation experiments of two different materials, calcium carbonate and lactose. Good agreement between experimental and simulated results was achieved enabling the granulation rates to be defined by two model parameters: the critical binder volume fraction and the aggregation rate constant. The modelling framework presented in this paper also provides a basis for the kinetic analysis of granulation experiments so that with further work, it is possible to determine the effect of process conditions and material properties on the model parameters.     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

Enhanced surface morphologies of screen-printed carbon nanotube films by heat treatment and their field-emission properties

A heating process for obtaining free-standing carbon nanotube emitters is presented with the aim of improving field-emission properties from the screen-printed multiwalled carbon nanotube (MWCNT) films. Using an atmosphere with an optimum combination of nitrogen and air for heat treatment of CNT films, the CNT emitters can be made to protrude from the surface. This allows for a high emission current and the formation of very uniform emission sites without special surface treatment. The morphological change of the CNT film by this technique has eliminated additional processing steps, such as surface treatment which may result in secondary contamination and damage to the film. Despite its simplicity the process provides a high reproducibility in emission current density which makes the films suitable for practical applications.     

Preparation and characterization of eugenol‐grafted chitosan hydrogels and their antioxidant activities

The hydrogels composed of chitosan and eugenol were prepared to enhance and sustain antioxidant activities. The vinyl groups of eugenol monomer were directly grafted on the amino groups of chitosan, using ceric ammonium nitrate. The graft of eugenol onto chitosan was confirmed by using Fourier‐transform infrared and proton nuclear magnetic resonance spectroscopies. Results from the swelling behavior, thermal stability, and wide‐angle X‐ray diffraction revealed that the equilibrium water content decreased with increase of graft yields, because of the hydrophobicity of eugenol, although the introduction of eugenol as a side chain disturbed the ordered arrangement of chitosan's crystalline structure. The eugenol‐grafted chitosan hydrogels showed lower pH sensitivity in comparison with chitosan alone, because the amino groups, which were pH sensitive, of chitosan were grafted with eugenol. The scavenging activity of the tested hydrogels increased with graft yield of eugenol, because phenolic groups in the eugenol could play a major role as potent free‐radical terminators, in the results of improved antioxidant activity in eugenol‐grafted chitosan hydrogel in comparison with chitosan alone. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99:3500–3506, 2006     

Synthesis, structure and magnetic properties of β-MnO 2 nanorods

We present synthesis, structure and magnetic properties of structurally well-ordered single-crystalline β-MnO₂ nanorods of 50–100 nm diameter and several μm length. Thorough structural characterization shows that the basic β-MnO₂ material is covered by a thin surface layer (∼2.5 nm) of α-Mn₂O₃ phase with a reduced Mn valence that adds its own magnetic signal to the total magnetization of the β-MnO₂ nanorods. The relatively complicated temperature-dependent magnetism of the nanorods can be explained in terms of a superposition of bulk magnetic properties of spatially segregated β-MnO₂ and α-Mn₂O₃ constituent phases and the soft ferromagnetism of the thin interface layer between these two phases.     

THERMODYNAMIC PERFORMANCE PREDICTION FOR NON-CFC MIXTURES

The ideal thermodynamic performances of a variety of non-CFC refrigerants and their mixtures were calculated by using the Patel-Teja equation of state. The results indicated that the preferable non-CFC refrigerant mixtures could be HCFC-I24 +HFC-152a, HFC-152a + HFC-134, dimethyl ether + HCFC-22, and dimethyl ether + HCFC-124 for air-conditioning systems, and binary mixtures of HCFC-22 + HFC-125, and HCFC-22 + HFC-143a for low-temperature applications. Those potential non-CFC mixtures were suggested for further investigations.     

Catalytic characteristics of various rubber-reinforcing carbon blacks in decomposition of methane for hydrogen production

Carbon black has recently been reported to act as an effective catalyst for methane decomposition and to exhibit stable catalytic behavior despite carbon deposition, and thus it can be used for CO₂-free production of hydrogen from natural gas. In this work, various carbon blacks with different primary particle size were investigated with respect to methane decomposition under atmospheric pressure from 1123 to 1223 K. Catalytic characteristics, such as activity, activation energy and reaction order, were investigated and compared. It was observed that with decreasing primary particle size (or increasing specific surface area), the specific activity increased and the activation energy decreased. The reaction orders for various pelletized, rubber-reinforcing carbon blacks were 0.6–0.7, about the same regardless of the primary particle size, while they were near 1 for fluffy carbon blacks. Fluffy carbon black showed higher activity and activation energy than the pelletized carbon black of the same primary particle size. Changes of the surface morphology during carbon deposition were observed by TEM. Variations of the number of active sites were discussed in regard of the primary particle size, carbon deposition and binder. The presence of different types of active sites was also suggested.