Monodisperse droplet formation through a continuous jet break‐up using glass nozzles operated with piezoelectric pulsation

In this article, a glass nozzle driven by piezoceramics is used to experimentally study the continuous generation of a stream of monodisperse droplets from the breakup of a liquid jet. The approach is demonstrated by examining the breakup dynamics of three distinct liquids. The droplet formation process has been found to be highly controllable and reproducible. The dependence of nozzle performance on liquid properties, flow rate, and disturbance frequency has been investigated. The ratio between the actual disturbance frequency and Reynolds number, ω, is employed at first to represent the operating range that facilitates monodisperse droplet formation. Then, the dimensionless quantity ω*, obtained by multiplying ω by the viscous characteristic time, r/(μ/ρ), has been shown to collapse the data for the lower and higher bounds of the actual disturbance frequency ranges that secure monodispersity of the droplets of all the samples tested. The impacts of liquid flow rate and disturbance frequency on the monodisperse droplet size and spacing between two neighboring droplets have been investigated and discussed. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Reaction Engineering Approach (REA) to model the drying kinetics of droplets with different initial sizes—experiments and analyses

Droplets with different initial sizes, which are typical in conventional liquid atomization for spray drying applications, will result in varying drying and crust formation histories. It is essential for any droplet drying model to accurately capture such fundamental phenomena. This study used a newly constructed glass-filament single droplet rig to evaluate the applicability of the Reaction Engineering Approach (REA) in describing such effect. For the three initial sizes (1, 2 and 3 μL) tested, the glass filament gravimetric method clearly distinguished the different drying kinetics and the crust formation phenomenon, delineated by the drying behavior. Analysis from the drying kinetics revealed that the main premise of the REA, which utilizes a material-specific master activation energy curve, is applicable to droplets of different initial sizes at all the three air temperatures tested. This allowed the REA to accurately predict the different temperature and moisture histories given by droplets with different initial sizes. The result supports the REA as a good modeling approach for a wide range of initial droplet conditions. A new master curve approach was proposed to predict the diameter change of droplets with different initial concentrations. Validation with the current and past experimental data revealed that this approach has strong potential to account for the different feed concentrations typically found in spray drying applications.     

Volatiles from Intact and Lygus-Damaged Erigeron annuus (L.) Pers. are Highly Attractive to Ovipositing Lygus and its Parasitoid Peristenus relictus Ruthe

Trap cropping and biological control can provide a sustainable means of controlling insect pests. Insects in the genus Lygus (Hemiptera: Miridae) are major pests on cotton and horticultural crops throughout the United States, and pesticide resistance within Lygus populations necessitates more sustainable long-term management techniques. Here, we explore behavioral responses of Lygus bugs (L. rubrosignatus Knight) and an introduced parasitoid, Peristenus relictus (Hymenoptera: Braconidae), to a common field edge plant, Erigeron annuus, which has the potential to serve as a trap host. Erigeron annuus is attractive to Lygus in the field, with Lygus preferentially moving to Erigeron patches compared to more abundant cotton plants. To determine the role of odor cues in mediating this attraction, we collected volatiles from E. annuus with and without Lygus damage, and then tested the attractiveness of these volatiles vs. those of cotton to Lygus females and female P. relictus wasps using Y-tube and wind tunnel bioassays. We found that undamaged E. annuus emits high concentrations of a complex volatile blend (60+ compounds), with novel compounds induced and constitutive compounds up-regulated in response to damage. Additionally, both female Lygus bugs and female P. relictus wasps are highly attracted to E. annuus volatiles over those of cotton in almost every combination of damage treatments. Our results suggest that Erigeron annuus would be an effective trap plant to control Lygus in cotton, since it is highly attractive to both the pest and its natural enemy.     

Tuning of ultraviolet-curable ink printability via in situ ultraviolet irradiation during direct ink write applications

Direct ink write deposition facilitates line-by-line extrusion of inks spanning wide viscoelastic ranges. Following deposition, post processing technologies permit tuning of the extrudate's material property characteristics—ultraviolet (UV) irradiation, facilitating the photopolymerization of UV-reactive catalyst solutions, permits targeted modification of the extrudate's microstructure and in situ tuning of extrudate macrostructure. This report analyzes the morphological, rheological, and microstructural property relationships governing the printability, and processivity, of extruded UV-curable resin inks for delineation of sufficiency and optimization of ink printability utilizing direct ink write technologies. A design-of-experiments approach is implemented to quantify significance regarding an extrudate's dimensional response to extrusion parameter variation and in situ processing parameters, identifying proportionally of nozzle velocity, nozzle height, and UV irradiation exposure with extrudate aspect ratio, reflected by respective maximum extrudate aspect ratio increases of 158% and 109%, regarding 121 and 123K resin inks. Finally, the relationship between extrudate morphology and microstructure variation was assessed via dielectric cure monitoring, whereby an extrudate's ion viscosity was calculated in relation to its rheological modulus, reflecting the relationship between an extrudate's morphology, rheological response, and printability, regarding its microstructural variation.     

21世纪的加速老化测试

研究了老化试验科学在21世纪的状况,以及取得最新突破性成果之前的漫长征程。介绍了一个全新的突破性的ASTM测试方法的诞生。     

Density functional theory calculations on graphene/α-SiO2(0001) interface

In this work, the graphene/α-SiO₂(0001) interface is calculated using density functional theory. On the oxygen-terminated SiO₂ surface, atomic structure reconstruction occurs at the graphene/SiO₂ interface to eliminate the dangling bonds. The interface interaction is 77 meV/C atom, which indicates that van der Waals force dominates the interaction, but it is stronger than the force between the graphene layers in graphite. The distance between graphene and the SiO₂ surface is 2.805 Å, which is smaller than the 3.4 Å interlayer distance of graphite. In addition, the SiO₂ substrate induces p-type doping in graphene and opens a small gap of 0.13 eV at the Dirac point of graphene, which is desirable for electronic device applications.     

NMR imaging of low pressure,gas‐phase transport in packed beds using hyperpolarized xenon‐129

Gas‐phase magnetic resonance imaging (MRI) has been used to investigate heterogeneity in mass transport in a packed bed of commercial, alumina, catalyst supports. Hyperpolarized ¹²⁹Xe MRI enables study of transient diffusion for microscopic porous systems using xenon chemical shift to selectively image gas within the pores, and, thence, permits study of low‐density, gas‐phase mass‐transport, such that diffusion can be studied in the Knudsen regime, and not just the molecular regime, which is the limitation with other current techniques. Knudsen‐regime diffusion is common in many industrial, catalytic processes. Significantly, larger spatial variability in mass transport rates across the packed bed was found compared to techniques using only molecular diffusion. It has thus been found that that these heterogeneities arise over length‐scales much larger than ～100 µm. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4013–4019, 2015     

Nebulizer-spray chamber apparatus and method for production of multi-component particle types and their use in affecting cellular responses

A particle generation apparatus and methodology is described for its application to prepare heterogeneous particles of defined chemical composition and their subsequent delivery to human lung cell cultures. A concentric type nebulizer was used together with a single pass spray chamber that was operated at two different temperature settings, either room temperature or to produce intact particles, at nonuniform temperature with the central axis measuring 54°C. Silica (SiO₂) particles in the micrometer size range were produced from the aggregation of nanoparticles. Tumor necrosis factor (TNF)-α, a well-characterized cytokine, was incorporated as a secondary soluble component within host silica particles for application as a proof-of-concept heterogeneous particle type. The overall particle deposition and wetting efficiency into media was 2.0 ± 0.4%, and the average size of particles that impacted and sank in the growth medium was 3.4 µm. The particle dose, reported as particle-to-cell ratio, spanned 0.1 to ～2.5. Co-cultures of A549 and differentiated human monocytic cells (THP-1*) exposed to silica particles caused IL-6 upregulation, but not IL-8. For the silica plus TNF-α particle type, ICAM-1 signal increased in A549 mono-cultures as the particle-to-cell ratio increased, yet an estimated 90% of the TNF-α was denatured or possibly bound to the silica particle host, and was therefore bio-unavailable. Method quantitation using particles having two different chemical compositions has been described, illustrating capability for subsequent systematic investigation of the role of particles having different chemical composition in the human health aspects of the particulate air pollution issue.

Copyright © 2016 American Association for Aerosol Research     

Large Piezoelectricity and Ferroelectricity in Mn‐Doped (Bi0.5Na0.5)TiO3‐BaTiO3 Thin Film Prepared by Pulsed Laser Deposition

Mn‐doped (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (MnBNBT) thin films were prepared on SrRuO₃ (SRO)‐coated (001) SrTiO₃ (STO) single crystal substrates by pulsed laser deposition under different processing conditions. Structural characterization (i.e., XRD and TEM) confirms the epitaxial growth of STO/SRO/MnBNBT heterostructures. Through the judicious control of deposition temperature, the defect level within the films can be finely tuned. The MnBNBT thin film deposited at the optimized temperature exhibits superior ferroelectric and piezoelectric responses with remanent polarization P_r of 33.0 μC/cm² and piezoelectric coefficient d₃₃ of 120.0 ± 20 pm/V.