Projection based statistical feature extraction with multispectral images and its applications on the Yellow River mainstream line detection

Mainstream line is significant for the Yellow River situation forecasting and flood control. An effective statistical feature extraction method is proposed in this paper. In this method, a between-class scattering matrix based projection algorithm is performed to maximize between-class differences, obtaining effective component for classification; then high-order statistics are utilized as the features to describe the mainstream line in the principal component obtained. Experiments are performed to verify the applicability of the algorithm. The results both on synthesized and real scenes indicate that this approach could extract the mainstream line of the Yellow River automatically, and has a high precision in mainstream line detection. Communication author: Zhang Haichao, born in 1986, male, Ph.D. candidate.     

Design and Evaluation of DNS as Location Manager for HIP

Host Identity Protocol (HIP) is designed to provide secure and continuous communication by separating the identifier and locator roles of the Internet Protocol (IP) address. HIP also has efficient solutions to support host mobility. In this paper, we propose a location management scheme based on Domain Name System (DNS) for HIP. In the proposed scheme, a new DNS HIP resource record is used to translate a domain name into a host identity tag and an IP address. We also develop an analytical model to study the performance of DNS as location manager in terms of success rate, which takes into account the velocity of mobile nodes, the radius of a subnet, the regional network size, the packet transmission delay between the mobile node and the rendezvous server, and the packet processing delay at the DNS and the rendezvous server. The performance results show that for a reasonable range, the DNS is a feasible solution for location management with high success rate for HIP.

Wireless Channel Tracking Based on Optimum Predictive LMS

A frequency domain analysis is presented to optimize the Predictive Least Mean Square (PLMS) algorithm used for wireless channel tracking. Simulation results show that the PLMS offers significant improvement in tracking performance compared to that of the conventional LMS based method. The algorithm parameters should be carefully selected in order to gain such improvements. The objective of this paper is to use frequency domain analysis to determine an expression for the Mean Square Tracking Error (MSTE) and use it to obtain the optimum PLMS algorithm parameters such as step size (μ) and smoothing constant (θ) with numerical optimization methods.

Lead-Free Bumping Using an Alternating Electromagnetic Field

A novel lead-free bumping technique using an alternating electromagnetic field (AEF) was investigated. Lead-free solder bumps reflowed onto copper pads through AEF have been achieved. A comparison was conducted between the microstructures of the lead-free solder joints formed by the conventional thermal reflow and AEF reflow. Keeping the substrate temperature lower than that of the solder bumps, AEF reflow successfully created metallurgical bonding between the lead-free solders and metallizations through an interfacial intermetallic compound (IMC). The AEF reflow could be finished in several seconds, much faster than the conventional hot-air reflow. Considering the morphology of the interfacial Cu₆Sn₅ IMC, a shorter heating time above the melting point would be a better choice for solder joint reliability. The results show that AEF reflow is a promising localized heating soldering technique in electronic packaging.     

Electrochemical Migration Characteristics of Eutectic Sn-Pb Solder Alloy in NaCl and Na<Subscript>2</Subscript>SO<Subscript>4</Subscript> Solutions

Anodic dissolution and the electrochemical migration characteristics of eutectic Sn-Pb solder alloy in deaerated 0.001% NaCl and Na₂SO₄ solutions were investigated using anodic polarization and water drop tests. Anodic polarization results revealed that a Pb-rich phase was preferentially ionized in deaerated 0.001% NaCl solution and an Sn-rich phase was predominantly ionized in deaerated 0.001% Na₂SO₄ solution, which coincides well with the composition of the dendrites formed during water drop tests. X-ray diffraction and photoelectron spectroscopy results showed that the surface oxide film formed on pure Sn in deaerated 0.001% NaCl solution is more stable than that formed on pure Sn in deaerated 0.001% Na₂SO₄ solution. The surface oxide film formed on pure Pb in deaerated 0.001% Na₂SO₄ solution is more stable than that formed on pure Sn in deaerated 0.001% NaCl solution. Therefore, the quality of the surface film of eutectic Sn-Pb solder in a chemical environment seems to be critical not only for corrosion resistance, but also for electrochemical migration resistance.     

Low Fatigue in Epitaxial Pb(Zr<Subscript>0.2</Subscript>Ti<Subscript>0.8</Subscript>)O<Subscript>3</Subscript> on Si Substrates with LaNiO<Subscript>3</Subscript> Electrodes by RF Sputtering

Epitaxial PZT (001) thin films with a LaNiO₃ bottom electrode were deposited by radio-frequency (RF) sputtering onto Si(001) single-crystal substrates with SrTiO₃/TiN buffer layers. Pb(Zr_0.2Ti_0.8)O₃ (PZT) samples were shown to consist of a single perovskite phase and to have an (001) orientation. The orientation relationship was determined to be PZT(001)[110]∥LaNiO₃(001)[110]∥SrTiO₃ (001)[110]∥TiN(001)[110]∥Si(001)[110]. Atomic force microscope (AFM) measurements showed the PZT films to have smooth surfaces with a roughness of 1.15 nm. The microstructure of the multilayer was studied using transmission electron microscopy (TEM). Electrical measurements were conducted using both Pt and LaNiO₃ as top electrodes. The measured remanent polarization P _r and coercive field E _c of the PZT thin film with Pt top electrodes were 23 μC/cm² and 75 kV/cm, and were 25 μC/cm² and 60 kV/cm for the PZT film with LaNiO₃ top electrodes. No obvious fatigue after 10¹⁰ switching cycles indicated good electrical endurance of the PZT films using LaNiO₃ electrodes, compared with the PZT film with Pt top electrodes showing a significant polarization loss after 10⁸ cycles. These PZT films with LaNiO₃ electrodes could be potential recording media for probe-based high-density data storage.     

Simulation of the High-Frequency Response of a Heterogeneous Ground through the Finite Difference Technique

To simulate the propagation of an electromagnetic plane wave in an inhomogeneous ground, the finite difference approach can be used. One of the main problems in using this method is imposing the boundary conditions near the ground surface, especially at high frequency. Indeed, for the E polarization, the upper top of the numerical grid must be sufficiently far away from the air-ground interface in order to neglect the field due to the heterogeneities and the discretization of the atmosphere is necessary. For magneto-telluric modeling, improved boundary conditions have already been proposed. This paper deals with a new condition, valid everywhere in air and which can be applied for E and H polarization. Thus even at high frequency, as for radar applications, only one line is added to the grid discretizing the ground.     

Power system transient stability analysis: Formulation as nearly Hamiltonian systems

In this paper we formulate power systems as nonlinear nearly Hamiltonian systems. Using the invariance principle for ordinary differential equations, necessary and sufficient conditions for asymptotic stability are established and a new method of estimating the domain of attraction of the stable equilibrium point is developed. The present results constitute a novel approach to stability analysis and involve the following three steps:

1. Given a system with dissipation, the stability of its equilibrium is ascertained by determining the stability of the associated conservative system.
2. Attractivity of the stable equilibrium of the entire system (with dissipation) is determined from the system topology.
3. An estimate of the domain of attraction of the asymptotically stable equilibrium is obtained by making use of results obtained in (a) and (b).

The stability criterion developed in this paper sheds new light on the mechanism of instability in power systems and it provides analytical verification to the concept of the potential-energy boundary surface (PEBS). The PEBS is a hypersurface which makes up a part of the boundary of the domain of attraction of the stable equilibrium in a power system. The existence and properties of the PEBS have thus far been deduced primarily via simulations and heuristic methods.     

A Zero-Pole Reposition Based, 0.95-mW, 68-dB,Linear-in-dB,Constant-Bandwidth Variable Gain Amplifier

A variable-gain amplifier with very low power consumption and wide tuning range is presented. The operational principle of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by simulation in TSMC 0.18-μm N-well CMOS fabrication process. Owing to the novel zero-pole repositioning technique, the proposed circuit demonstrates very high frequency bandwidth of 79 MHz while drawing only 0.52 mA from 1.8 V power supply. The interesting results such as a very small core area of about 0.0025 mm² as well as a wide linear-in-dB and constant-bandwidth tuning range of 68.2 dB along with a very low power consumption of 0.95 mW are achieved utilizing standard CMOS technology. The stability of the proposed VGA is verified through transient sinusoidal response analysis. Full process, voltage and temperature (PVT) variation analysis of the circuit is also investigated through Monte Carlo and corner case analysis in order to approve the robustness of the structure. Monte Carlo simulations show standard deviation values of 4.6 dB and 78.3 MHz in gain and gain-bandwidth product, respectively. These results show that our zero-pole repositioning method would lend itself well for use in low-power and high-frequency applications, especially in high-speed automatic gain control amplifiers.     

Characterization and modeling of static and cyclic relaxation in nonconductive adhesives

Adhesive interconnections are considered to be attractive alternatives to lead or lead-free solder interconnects because of their lower processing temperatures and extendability to fine pitch applications. However, reliability issues, such as moisture-induced delamination and viscoelastic relaxation of the adhesive in both steady-state and cyclic loading, continue to pose a challenge to widespread implementation. To date, the static and cyclic relaxation characteristics of nonconductive adhesives (NCAs) are yet to be understood. This paper attempts to provide insights into this static and cyclic relaxation behavior through experimental characterization and modeling. The viscoelastic property of a typical NCA material was characterized, and a simulation program with integrated circuit emphasis (SPICE) modeling program was used to model the cyclic relaxation behavior. The modeling results were successfully validated with a series of experiments. This showed that cyclic relaxation of the adhesive can be successfully modeled using linear-viscoelastic property. The phenomenon of slower relaxation of the adhesive under cyclic loading than that in static loading suggests that accelerated reliability testing used in solder-joint fatigue durability investigations may not be directly applicable to the adhesive interconnections. A rework methodology applicable to adhesive interconnects using cyclic loading has also been proposed.