Toxicity and Biodegradability Behavior of Xenobiotic Chemicals Before and After Ozonation: A Case Study with Commercial Textile Tannins

Ozonation of a natural tannin (NT; COD_o?=?1195 mg/L; TOC_o?=?342 mg/L; BOD_5,o?=?86 mg/L) and a synthetic tannin ST; COD_o?=?465 mg/L; TOC_o?=?55 mg/L; BOD_5,o?=?6 mg/L) being frequently applied in the polyamide dyeing process was investigated. Synthetic wastewater samples containing these tannins individually were prepared and subjected to ozonation at varying ozone doses (625– 1250 mgO₃/L wastewater), at pH?=?3.5 (the application pH of tannins) and pH?=?7.0 at an ozone dose of 1125 mgO₃/L wastewater. The collective environmental parameters COD, TOC, BOD₅, UV₂₅₄ and UV₂₈₀ (UV absorbance at 254 nm and 280 nm, representing aromatic and unsaturated moieties, respectively) were followed during ozonation. Changes in the biodegradability of the tannins were evaluated in terms of BOD₅ measurements conducted before and after ozonation. In addition, activated sludge inhibition tests employing heterotrophic biomass were run to elucidate the inhibitory effect of raw and ozonated textile tannins towards activated sludge biomass. Partial oxidation (45% COD removal at an ozone dose of 750 mg O₃/L wastewater and pH?=?3.5) of ST was sufficient to achieve elimination of its inhibitory effect towards heterotrophic biomass and acceptable biodegradability improvement, whereas the inhibitory effect and biodegradability of NT could not be reduced via ozonation under the same reaction conditions.     

A Survey of Handover Techniques for Wireless ATM Networks

This paper provides a review and comprehensivecomparison of existing handover schemes proposed forwireless ATM networks. Existing schemes include thoseproposed by NEC, Olivetti, Bell Labs, Cambridge, Stanford, CMU, Berkeley, Michigan, VTT, andColumbia. We highlight the methodologies employed by thevarious schemes and reveal their differences. We discussissues related to the effect of ATM switch architectures on mobility implementation and on futurehandover paradigms.     

Determining optimum tilt angles and orientations of photovoltaic panels in Sanliurfa, Turkey

The performance of a photovoltaic (PV) panel is affected by its orientation and its tilt angle with the horizontal plane. This is because both of these parameters change the amount of solar energy received by the surface of the PV panel. A mathematical model was used to estimate the total solar radiation on the tilted PV surface, and to determine optimum tilt angles for a PV panel installed in Sanliurfa, Turkey. The optimum tilt angles were determined by searching for the values of angles for which the total radiation on the PV surface was maximum for the period studied. The study also investigated the effect of two-axis solar tracking on energy gain compared to a fixed PV panel. This study determined that the monthly optimum tilt angle for a PV panel changes throughout the year with its minimum value as 13° in June and maximum value as 61° in December. The results showed that the gains in the amount of solar radiation throughout the year received by the PV panel mounted at monthly optimum tilt angles with respect to seasonal optimum angles and tilt angel equal to latitude were 1.1% and 3.9%, respectively. Furthermore, daily average of 29.3% gain in total solar radiation results in an daily average of 34.6% gain in generated power with two-axis solar tracking compared to a south facing PV panel fixed at 14° tilt angle on a particular day in July in Sanliurfa, Turkey.     

Neuroendocrine cell hyperplasia in colonic tissue used for long term augmentation cystoplasty

A case of torsion of the wandering spleen with splenic infarction is reported. The medical imaging studies performed with typical findings are described. Case reports have been reviewed. Although rare, torsion of the spleen remains an important differential diagnosis in patients presenting with acute abdominal pain. Early intervention is necessary to reduce the risk of splenic infarction and other complications, and an increased awareness of the condition together with the use of appropriate medical imaging can lead to the correct diagnosis more readily.     

Wake-up receivers for wireless sensor networks: benefits and challenges - [Accepted from open call]

For successful data delivery, the destination nodes should be listening to the medium to receive data when the sender node starts data communication. To achieve this synchronization, there are different rendezvous schemes, among which the most energy-efficient is utilizing wakeup receivers. Current hardware technologies of wake-up receivers enable us to evaluate them as a promising solution for wireless sensor networks. In this article the benefits achieved with wake-up receivers are investigated along with the challenges observed. In addition, an overview of state-of-the-art hardware and networking protocol proposals is presented. As wake-up receivers offer new opportunities, new potential application areas are also presented and discussed.     

Characterization of Double-Junction GaAsP Two-Color LED Structure

The structural, optical, electrical and electrical–optical properties of a double-junction GaAsP light-emitting diode (LED) structure grown on a GaP (100) substrate by using a molecular beam epitaxy technique were investigated. The p–n junction layers of GaAs_1?xP_x and GaAs_1?yP_y, which form the double-junction LED structure, were grown with two different P/As ratios. High-resolution x-ray diffraction (HRXRD), photoluminescence (PL), and current–voltage (I–V) measurements were used to investigate the structural, optical and electrical properties of the sample. Alloy composition values (x, y) and some crystal structure parameters were determined using HRXRD measurements. The phosphorus compositions of the first and second junctions were found to be 63.120% and 82.040%, respectively. Using PL emission peak positions at room temperature, the band gap energies (E_g) of the first and second junctions were found to be 1.867 eV and 2.098 eV, respectively. In addition, the alloy compositions were calculated by Vegard’s law using PL measurements. The turn-on voltage (V_on) and series resistance (R_s) of the device were obtained from the I–V measurements to be 4.548 V and 119 Ω, respectively. It was observed that the LED device emitted in the red (664.020 nm) and yellow (591.325 nm) color regions.     

Investigation of mean glandular dose versus compressed breast thickness relationship for mammography

The relationship between the mean glandular dose (MGD) and the compressed breast thickness (CBT) is commonly used for the presentation of mammographic dose survey results and could also be useful for the assessment of individual breast doses retrospectively in case of lack of necessary dosimetric instrumentation. The high data scattering from the best fit reduces the reliability of this technique. The aim of this study was to investigate the accuracy of this relationship using the data collected from a patient survey and phantom experiment. Patients were divided into three different groups according to their breast glandularities, which were predicted from the inspection of previous mammograms. X-ray beam qualities that will be used in patient examinations were determined according to breast thickness and predicted glandularities. The MGD versus CBT relationship for all the examined patients resulted in a poor correlation (R(2) = 0.28). This relationship was separately obtained for each glandularity group and also for sub-groups of specific beam qualities. The best correlation (R(2) = 0.73) was obtained for the fatty breast group and Mo/Mo combination. A low correlation (R(2) = 0.34) was observed in the mid-glandularity group due to inclusion of a wide range of glandularities in this group. In the case of the dense breast group, although the glandularity range was narrow, there were e still high data scattering (R(2) = 0.25). This was probably due to the use of Mo/Rh and Mo/Mo combinations. This is validated by obtaining the MGD-CBT relationship specific to Mo/Mo combination (R(2) = 0.61).     

WiSEGATE: Wireless Sensor Network Gateway framework for internet of things

With internet of things vision, computing systems get the ubiquity of real world. Wireless Sensor Network (WSN) technology plays a critical role for the construction of this paradigm. Hence, WSN technology should be adapted to support interoperability with the commodity internet entities. Since technological background of WSN and IP networks do not fit each other, this effort is not a straightforward process. In this paper, we introduce WiSEGATE which addresses end-to-end reliable interconnection problem between multiple internet entities and sensor nodes. WiSEGATE is a prototype of a new web server which supports three tier service scheme with a data acquisition mechanism of WSN to access the physical data in particular locations in the real world. In WiSEGATE, an interconnection gateway handles operations required for the interoperability. Since this gateway maintains reliable TCP/IP connections of the interconnected entities, the resource constraint sensor nodes on WSN do not require a TCP/IP stack for handling end-to-end connections. A lightweight service layer is implemented on a sensor node for operations required by the interconnection. The strength and novelty of the model lies in the fact that this lightweight service layer relieves extra memory usage for end-to-end connection management. For determining limits of the proposed model, firstly, we examined the steps for request/response mechanism and modeled the gateway as a queueing system. By doing this, we derive a definition of the request traffic. For proof of concept, we performed comprehensive tests in simulation and real testbed environments for WLAN connection. WiSEGATE can achieve reasonable response times up to 80 simultaneous connections from remote entities to WSN when WLAN PER is less than 0.2.     

Mechanical properties of bovine hydroxyapatite (BHA) composites doped with SiO<Subscript>2</Subscript>, MgO,Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, and ZrO<Subscript>2</Subscript>

Biologically derived hydroxyapatite from calcinated (at 850 °C) bovine bones (BHA) was doped with 5 wt% and 10 wt% of SiO₂, MgO, Al₂O₃ and ZrO₂ (stabilized with 8% Y₂O₃). The aim was to improve the sintering ability and the mechanical properties (compression strength and hardness) of the resultant BHA-composites. Cylindrical samples were sintered at several temperatures between 1,000 and 1,300 °C for 4 h in air. The experimental results showed that sintering generally occurs at 1,200 °C. The BHA–MgO composites showed the best sintering performance. In the BHA–SiO₂ composites, extended formation of glassy phase occurred at 1,300 °C, resulting in structural degradation of the resultant samples. No sound reinforcement was achieved in the case of doping with Al₂O₃ and zirconia probably due to the big gap between the optimum sintering temperatures of BHA and these two oxides.