Thin-layer activation of hip-joint prostheses for tribological tests

Thin-layer activation as a method of measuring wear has been applied in a tribological study of artificial hip joints made from CoCrMo forged alloy. The activation of CoCrMo alloy using protons, deuterons, ³He, and -particles has been studied systematically. Excitation functions are reported for the reactions ⁵⁹Co(d, p)⁶⁰Co and ¹⁰⁰Mo(, n)¹⁰³Ru.     

SURFACE TENSION EFFECTS IN THE SEDIMENTATION OF COAL PARTICLES IN VARIOUS LIQUID MIXTURES

The sedimentation volume, V_sed, of coal particles in mixtures of pairs of non-polar and more polar organic liquid combinations as well as in aqueous solutions was determined at 20°C.

The liquid combinations were chosen such that the surface tension, γ_SV, of the coal particles fell between the surface tensions, γ_LV, of the two liquids. A constant mass of a given coal sample was suspended in constant volumes of liquid mixtures of different concentrations.

It was found that the sedimentation volume changed with varying composition of the liquid mixtures, as did the surface tension. A maximum or a minimum occurred in V_sed when the surface tension of the suspending liquid was equal to that of the coal particles, i.e. when γ_LV = γ_SV. Maxima occurred in more polar and minima in the non-polar or less polar liquid mixtures. The position of the extrema, and hence the surface tension, γ_sv, of the particles, was found to change with particle size, in agreement with findings from other independent techniques.

It was found that the surface tension of coal, γ_sv, depends on the surrounding liquid, i.e. coal is hydrophobic in organic and hydrophilic in aqueous media, again in agreement with the results from other techniques.     

Regulating Li-Ion Transport through Ultrathin Molecular Membrane to Enable High-Performance All-Solid-State–Battery

Solid-state lithium metal batteries with garnet-type electrolyte provide several advantages over conventional lithium-ion batteries, especially for safety and energy density. However, a few grand challenges such as the propagation of Li dendrites, poor interfacial contact between the solid electrolyte and the electrodes, and formation of lithium carbonate during ambient exposure over the solid-state electrolyte prevent the viability of such batteries. Herein, an ultrathin sub-nanometer porous carbon nanomembrane (CNM) is employed on the surface of solid-state electrolyte (SSE) that increases the adhesion of SSE with electrodes, prevents lithium carbonate formation over the surface, regulates the flow of Li-ions, and blocks any electronic leakage. The sub-nanometer scale pores in CNM allow rapid permeation of Li-ions across the electrode–electrolyte interface without the presence of any liquid medium. Additionally, CNM suppresses the propagation of Li dendrites by over sevenfold up to a current density of 0.7 mA cm⁻² and enables the cycling of all-solid-state batteries at low stack pressure of 2 MPa using LiFePO₄ cathode and Li metal anode. The CNM provides chemical stability to the solid electrolyte for over 4 weeks of ambient exposure with less than a 4% increase in surface impurities.     

Effective cleaning of hexagonal boron nitride for graphene devices

Hexagonal boron nitride (h-BN) films have attracted considerable interest as substrates for graphene. ( Dean, C. R. et al. Nat. Nanotechnol. 2010 , 5 , 722 - 6 ; Wang, H. et al. Electron Device Lett. 2011 , 32 , 1209 - 1211 ; Sanchez-Yamagishi, J. et al. Phys. Rev. Lett. 2012 , 108 , 1 - 5 .) We study the presence of organic contaminants introduced by standard lithography and substrate transfer processing on h-BN films exfoliated on silicon oxide substrates. Exposure to photoresist processing adds a large broad luminescence peak to the Raman spectrum of the h-BN flake. This signal persists through typical furnace annealing recipes (Ar/H(2)). A recipe that successfully removes organic contaminants and results in clean h-BN flakes involves treatment in Ar/O(2) at 500 °C.     

Magnetic and optical properties of cobalt nanowires fabricated in polycarbonate ion-track templates

Cobalt nanowires with diameter 75 nm were synthesized in ion track-etched membranes by electrochemical deposition. Scanning electron microscopy displays cylindrical wires with smooth and homogeneous contours. X-ray diffraction studies indicate that the wires possess a face centered cubic structure and a preferred growth orientation along the [1 1 0] direction. The wires exhibit magnetic anisotropy, which is observed and is ascribed to shape anisotropy. The optical extinction spectrum shows a band which probably originates from a surface plasmon resonance.     

Ion-velocity dependence of high-density electronic excitation effects in oxide superconductors

Thin films of EuBa₂Cu₃O_y oxide superconductor have been irradiated with high energy heavy ions (80 MeV I, 125 MeV Br, 1.1 GeV Mo and 3.5 GeV Xe) having same electronic stopping power, S_e, in order to investigate the ion-velocity dependence of the electronic excitation effects under the constant electronic energy deposition. Although S_e is constant, a strong reduction in the irradiation effect on lattice parameter with increasing ion-velocity is observed in the low ion-velocity region around E  1 MeV/nucleon, while the ion-velocity dependence is hardly observed in the high ion-velocity region of E > 10 MeV/nucleon. If the observed velocity-dependence is assumed to be due to the change in the fraction of S_e contributing to defect creation, the fraction in the low velocity region (E  0.6 MeV/nucleon) is estimated to be about two times larger than that in the high velocity region (E > 10 MeV/nucleon).     

Compact Metallic Reflectance Models

The paper presents simple, physically plausible, but not physically based reflectance models for metals and other specular materials. So far there has been no metallic BRDF model that is easy to compute, suitable for fast importance sampling and is physically plausible. This gap is filled by appropriate modifications of the Phong, Blinn and the Ward models. The Phong and the Blinn models are known not to have metallic characteristics. On the other hand, this paper also shows that the Cook-Torrance and the Ward models are not physically plausible, because of their behavior at grazing angles. We also compare the previous and the newly proposed models. Finally, the generated images demonstrate how the metallic impression can be provided by the new models.     

Closure behaviour of small cracks

Measurements of the initiation, growth, and closure behaviour of micro-cracks are reported for one ferritic and one austenitic low strength steel. Interferometric measurements of the COD of small surface cracks were performed with a resolution of 3 nm in order to measure the closure behaviour of micro-cracks. The van der Waals forces between atoms were added numerically in order to calculate the normal as well as the tangential forces acting between closely separated crack faces. The results are discussed in the context of the growth and closure of micro-cracks.