Preparation and characterization of natural rubber dispersed in nano-matrix

Preparation of a model nano-matrix-dispersed polymer was investigated in terms of graft-copolymerization of deproteinized natural rubber latex with styrene, using tert-butyl hydroperoxide/tetraethylenepentamine as an initiator. The products were characterized by ¹H-NMR spectroscopy and size-exclusion-chromatography after ozonolysis. The grafting efficiency of styrene was found to be more than 90% under the best condition of the graft-copolymerization. The morphology of the film specimens, prepared from graft-copolymers, was observed by transmission electron microscopy after staining the films with OsO₄. Natural rubber particle of about 0.5 μm in diameter was dispersed in polystyrene matrix of about 15 nm in thickness.     

Effect of fatty acids on the strain‐induced crystallization of natural rubber detected by tear energy measurements

The strain‐induced crystallization of natural rubber (NR) was investigated by the measurement of the tear energy of a crosslinked blend consisting of NR and noncrystalline styrene–butadiene rubber (SBR). When NR was dispersed into the SBR matrix, the tear energy of SBR increased at various temperatures and tear rates. After the application of the principle of time–temperature superposition to the tear energy according to the Williams–Landel–Ferry equation, two distinct curves were found for the NR/SBR blend with respect to the reduced tear rate, despite the fact that the tear energy of SBR or the SBR/SBR blend gave its own single composite curve. When the fatty acid in the NR/SBR blend was removed by acetone extraction, the tear energy of the blend drew a single composite curve. The conversion of the two curves into the single composite curve for the NR/SBR blend suggested that the tear energy depended on the strain‐induced crystallization of NR dispersed in the SBR matrix, which was suppressed by the removal of the fatty acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 613–619, 2005     

Meter-scale large area LED-embedded light fabric for the application of fabric ceilings in rooms

We have developed a meter-scale light emitting diode (LED)-embedded light fabric and its weaving machine for application to a light device for fabric ceilings, which have recently become desired for lightweight safe ceilings in Japan and other countries with frequent earthquakes. The LED fabric structure is 1.2-m-wide woven fabric that has 5-mm-wide LED chip-mounted printed circuit board (PCB) tapes as wefts. LEDs are mounted on the tape of PCBs with a reel-to-reel chip mounting system. Then, the LED-mounted tapes are woven with a developed automatic looming machine that aligns the weft with an accuracy of 0.9 mm, which is suitable for precise arrangement of LEDs and wiring to power supply. A 1.2 × 1.2 m LED-embedded light fabric weighing 320 g/m² was woven. The luminance of the LED fabric is 353 lx at a distance of 1 m, which is the luminance of conventional office lighting. The temperature increase of LEDs without a rigid cooling aluminum plate is only 5.8 °C, and the LED fabric is flexible enough to sustain 1,000 bends down to a radius of 3 mm. This LED fabric and its weaving technology will lead to light devices that have lightweight, large area, and high flexibility for fabric ceilings, walls, and other large areas in homes and offices.     

Asymmetric beam deflection by doubly grooved binary gratings

It is demonstrated theoretically and experimentally that the inversion symmetry of the diffraction pattern of a binary grating at normal incidence can be efficiently broken by the use of nonsymmetric profiles with wavelength-scale transverse features. Theoretically, binary gratings with two grooves (of unequal widths but with the same depth) within the period can deflect as much as ～80% of normally incident radiation into the minus first diffraction order when the deflection angle is 45°.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Safety aspects of the combined HTTR/steam reforming complex for nuclear hyrogen production

The High-Temperature Engineering Test Reactor (HTTR) in Oarai, Japan, has the potential to demonstrate the production of hydrogen by steam reforming and using nuclear process heat as primary energy input. Particular safety aspects for such a combined nuclear/chemical complex have been investigated such as fire and explosion hazard at presence of flammable gases (LNG, H₂, CO) near the reactor building. A methane vapor cloud in the open atmosphere or partially obstructed areas is highly unlikely to detonate and damage the reactor building. Theoretical assessments and experimental studies significant to the HTTR-steam reforming system, include the spreading and combustion behavior of cryogens and flammable gases providing the basis for a comprehensive safety analysis of the nuclear/chemical facility.     

Development of an alpha/beta/gamma detector for radiation monitoring

For radiation monitoring at the site of nuclear power plant accidents such as Fukushima Daiichi, radiation detectors not only for gamma photons but also for alpha and beta particles are needed because some nuclear fission products emit beta particles and gamma photons and some nuclear fuels contain plutonium that emits alpha particles. We developed a radiation detector that can simultaneously monitor alpha and beta particles and gamma photons for radiation monitoring. The detector consists of three-layered scintillators optically coupled to each other and coupled to a photomultiplier tube. The first layer, which is made of a thin plastic scintillator (decay time: 2.4 ns), detects alpha particles. The second layer, which is made of a thin Gd(2)SiO(5) (GSO) scintillator with 1.5 mol.% Ce (decay time: 35 ns), detects beta particles. The third layer made of a thin GSO scintillator with 0.4 mol.% Ce (decay time: 70 ns) detects gamma photons. By using pulse shape discrimination, the count rates of these layers can be separated. With individual irradiation of alpha and beta particles and gamma photons, the count rate of the first layer represented the alpha particles, the second layer represented the beta particles, and the third layer represented the gamma photons. Even with simultaneous irradiation of the alpha and beta particles and the gamma photons, these three types of radiation can be individually monitored using correction for the gamma detection efficiency of the second and third layers. Our developed alpha, beta, and gamma detector is simple and will be useful for radiation monitoring, especially at nuclear power plant accident sites or other applications where the simultaneous measurements of alpha and beta particles and gamma photons are required.     

Verification and validation of explicit moving particle simulation method for application to internal flooding analysis in nuclear reactor building

The Fukushima nuclear accident raised the importance of flooding study in nuclear reactor buildings. It is known that the external flooding can be attributed to natural causes, while the internal flooding is caused by the piping ruptures, tank failure or the actuation of fire suppression systems. The building flooding process can damage the safety-related components and systems, which needs to study carefully. In order to simulate this phenomenon which is accompanied by complex flow with free surface, a particle method based on Lagrangian approach named explicit moving particle simulation (EMPS) method, is employed in this analysis. Verification and validation analyses are carried out. The verification problems are a hydrostatic analysis and a water spreading to investigate the differences of the particle wall and polygon wall boundary models, while the validation studies of two experiments of dam-break induced flooding show good agreements. Afterwards, the internal flooding process in AP1000 is simulated by assuming a break of the in-containment refueling water storage tank as an example. The results achieved so far indicate that the EMPS method is capable to simulate the internal flooding process in the nuclear reactor buildings.