Investigation of Seismic Behavior and Infill Wall Effects for Prefabricated Industrial Buildings in Turkey

Recently, Turkey has been hit by several moderate to large earthquakes that resulted in significant loss of life and property. The 1998 Adana and 1999 Marmara earthquakes caused severe damage not only in residential buildings but also in industrial buildings. Most of the industrial buildings in Turkey are constructed as prefabricated structures. Prefabricated structures are preferred because of their economic and rapid production. In the present study, the earthquake behavior and infill wall effects for single story hinged industrial prefabricated buildings were investigated. Nonlinear pushover, performance-based, time history, and fragility analyses were carried out for a sample prefabricated industrial building. Infill wall effect was investigated by adopting a diagonal strut model. The structural behavior and load-deformation relationship of prefabricated industrial buildings both with and without infilled walls were evaluated and compared. Results of the study show that masonry infill walls can affect the lateral load-carrying capacity and modify the earthquake response of prefabricated industrial buildings.     

Pros and cons of the new financial support policy for Turkish researchers

Scientometrics - In 2015, a new ex-post incentive policy was introduced in Turkey to increase the academic productivity of researchers. This convergent parallel design study aims to find an answer...     

Determination of formability characteristics of Crofer 22 APU sheets as interconnector for solid oxide fuel cells

In this study, the general formability characteristics of Crofer^® 22 APU sheets of different thicknesses (0.2 mm–1.0 mm) are experimentally investigated via tensile, out of plane, Erichsen, cupping and springback tests for a possible application for solid oxide fuel cells in sheet form unlike the conventional bulk form. Holloman equation is also used to fit the experimental stress-strain curves and the anisotropic behavior of the material is considered by determining Lankford parameters. The tensile test results show that the formability is about 0.29 mm/mm for 0.2 mm thick sheets, indicating the suitability of these sheets for the fabrication of interconnectors by a stamping process with desired channel geometry having dimensions similar to conventional channel dimensions. In addition, for a specific combination of process parameters such as blank holder force and lubrication, the formability can be enhanced as proven by Erichsen and cupping test results. Moreover, the formability is found to increase with increasing the sheet thickness and highly anisotropic behavior is observed. In three point bending tests, the negative springback behavior, namely spring-in, is surprisingly observed for a relatively narrow shoulder distance at all thicknesses and set angle values (θ = 90°–120°).     

Relationships between acute toxicities of para nitrophenol (p-NP) and nitrobenzene (NB) to Daphnia magna and Photobacterium phosphoreum: physicochemical properties and metabolites under anaerobic/aerobic sequentials

In this study, the acute toxicities of nitrobenzene (NB) and para nitrophenol (p-NP) were investigated in a high rate sequential anaerobic migrating blanket (AMBR)/aerobic completely stirred tank reactor (CSTR) using Microtox and Daphnia magna tests. After sequential anaerobic and aerobic treatments, the inhibitions in the Microtox bacteria decreased from an initial 78.10-48.20% and 4.00%, respectively, in wastewater containing 40.00 mg/L p-NP. The inhibitions of the influent wastewater containing 60.00 mg/L NB decreased from 72.10% to 45.30% and to 4.00% after anaerobic and aerobic treatment, respectively. The acute toxicity removals were 94% and 93% in the effluent of the whole sequential system, for p-NP and NB, respectively. The acute toxicity in the influent was dependent on the parent NB and p-NP concentrations and ons their physicochemical properties such as hydrophobicity, octanol/water partition coefficient and vapour density for both Microtox bacteria and Daphnia magna while the toxicity in the effluent of the anaerobic reactor was strongly dependent on the metabolites of p-NP (p-amino phenol, phenol, NH(4)-N) and NB (aniline) for Microtox test. This effluent was not toxic to Daphnia magna.     

Is there any interaction of resistin and adiponectin levels with protein‐energy wasting among patients with chronic kidney disease

The aim of this study was to evaluate the effects of adipocytokines including adiponectin, leptin, resistin, neuropeptide Y and ghrelin in chronic kidney disease (CKD) patients on appearance of protein‐energy wasting (PEW). One hundred fifty patients with mean age of 45.4 ± 15.9 years, without active infections or chronic inflammatory conditions were recruited into the study. Study groups were control group (consisting of 30 healthy volunteers with normal kidney functions), hemodialysis group, predialysis group, peritoneal dialysis group and kidney transplant group. Fasting morning serum leptin, ghrelin, acylated ghrelin, neuropeptide Y, adiponectin, resistin levels of all of the groups were measured. Anthropometric and nutritional assessments of all patients were obtained. Diagnosis of PEW was made according to definition recommended by the International Society of Renal Nutrition and Metabolism. Presence of PEW in hemodialysis (23.3%) and peritoneal dialysis (26.7%) groups were significantly higher than those of predialysis (3.3%), and transplantation (0%) groups. Adiponectin and resistin levels in predialysis, peritoneal dialysis and hemodialysis patients were significantly higher than control group (p: 0.0001). This study had given significant positive correlations between presence of PEW and serum resistin (r: 0.267, p: 0.001), and serum adiponectin levels (r: 0.349, p: 0.0001). There were no relationship between presence of PEW and ghrelin, acylated‐ghrelin, neuropeptide Y, and leptin levels of the groups. CKD patients except transplant patients had higher adiponectin and resistin levels than control group. PEW was found to be linearly correlated with resistin and adiponectin. High serum resistin and adiponectin levels might have a role in development of PEW among dialysis patients.     

An Automated Ultrasonic NDT System for In-Situ Inspection of Wind Turbine Blades

It is crucial to maintain wind turbine blades regularly, due to the high stress leading to defects or damage. Conventional methods require shipping the blades to a workshop for off-site inspection, which is extremely time-consuming and very costly. This work investigates the use of pulse-echo ultrasound to detect internal damages in wind turbine blades without the necessity to ship the blades off-site. A prototype 2D ultrasonic NDT （non-destructive testing） system has been developed and optimised for in-situ wind turbine blade inspection. The system is designed to be light weight so it can be easily carried by an inspector onto the wind turbine blade for in-situ inspection. It can be operated in 1D A-scan, 2D C-scan or 3D volume scan. A software system has been developed to control the automated scanning and show the damage areas in a 2D/3D map with different colours so that the inspector can easily identify the defective areas. Experiments on GFRP （glass fibre reinforced plastics） and wind turbine blades （made of GFRP） samples showed that internal defects can be detected. The main advantages of this system are fully automated 2D spatial scanning and the ability to alert the user to the damage of the inspected sample. It is intended to be used for in-situ inspection to save maintenance time and hence considered to be economically beneficial for the wind energy industry.     

Effect of In, Ce and Bi dopings on sintering and dielectric properties of Ba(Zn1/3Nb2/3)O3 ceramics

In, Ce and Bi doped Ba(Zn_1/3Nb_2/3)O₃ (BZN) ceramics were prepared by conventional mixed oxide technique. In doping between 0.2 and 4.0 mol% increased the density of BZN at 1300 °C, Ce doping caused a decrease in density at 1250 °C. Levels of Bi₂O₃ up to 1.0 mol% had negative effect on densification, while high level doping could significantly improve the densification of the specimens. XRD of the samples indicated that In, Ce and Bi doping resulted in single phase formation at all concentrations, except 0.5 mol% Bi. SEM of Bi doped BZN indicated only single phase structure and Ce doping even at 0.2 mol% gave some secondary phases. In and Ce doping increased the dielectric constant from 41 to around 66 at 1 MHz. Bi doping decreased the dielectric constant to about 37 at 0.2 mol%, and then higher doping led to dielectric constant to increase to about 63.     

Performance evaluation of constraint-based path selection algorithms

Constraint-based path selection is an invaluable part of a full-fledged quality of service (QoS) architecture. Internet service providers want to be able to select paths for QoS flows that optimize network utilization and satisfy user requirements and as such increase revenues. Unfortunately, finding a path subject to multiple constraints is known to be an NP-complete problem. Hence, accurate constraint-based path selection algorithms with a fast running time are scarce. Numerous heuristics and a few exact algorithms have been proposed. In this article we compare most of these algorithms. We focus on the restricted shortest path algorithms and multi-constrained path algorithms. The performance evaluation of these two classes of algorithms is presented based on complexity analysis and simulation results and may shed some light on the difficult task of selecting the proper algorithm for a QoS-capable network.