A reliable overlay video transport protocol for multicast agents in wireless mesh networks

A new video transport protocol for multicast agents in wireless mesh networks (WMNs) is proposed in this paper. The proposed protocol enables a significant reduction in the transmission overhead, while providing reliable communication for its use in multicast applications. This proposed reliable protocol provides a practical approach for an overlay peer‐to‐peer multicast facility supported within the application layer. This obviates the need to give upgraded routers capable of handling multicast broadcasting or modify the existing protocol stack. The protocol tolerates partial losses in multimedia transmissions, while supporting control of the delay sensitivity of such transmissions in WMNs. The key issue in this protocol is the ability to detect packet loss, anticipate retransmission requests, and use the anticipated retransmission requests to transmit the lost packets prior to requests from other receiving agents. The proposed protocol allows for the receiver to determine if retransmission of lost packets is required, ensuring the greatest flexibility needed for a reliable multicast protocol. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitivity analysis of ion implanted silicon wafers after rapid thermal annealing

In this study, we have investigated sensitivities of the ion implanted silicon wafers processed by rapid thermal annealing (RTA), which can reveal the variation of sheet resistance as a function of annealing temperature as well as implantation parameters. All the wafers were sequentially implanted by the arsenic or phosphorous implantations at 40, 80, and 100 keV with the dose level of 10¹⁴ to 2 × 10¹⁶ ions/cm². Rapid thermal annealing was carried out for 10 s by the infrared irradiation at a temperature between 850 and 1150°C in the nitrogen ambient. The activated wafer was characterized by the measurements of the sheet resistance and its uniformity mapping. The values of sensitivities are determined from the curve fitting of the experimental data to the fitting equation of correlation between the sheet resistance and process variables. From the sensitivity values and the deviation of sheet resistance, the optimum process conditions minimizing the effects of straggle in process parameters are obtained. As a result, a strong dependence of the sensitivity on the process variables, especially annealing temperatures and dose levels is also found. From the sensitivity analysis of the 10 s RTA process, the optimum values for the implant dose and annealing temperature are found to be in the range of 10¹⁶ ions/cm² and 1050-1100°C, respectively. The sensitivity analysis of sheet resistance will provide valuable data for accurate activation process, offering a guideline for dose monitoring and calibration of ion implantation process.     

Continuous Control of Charge Transport in Bi‐Deficient BiFeO3 Films Through Local Ferroelectric Switching

It is demonstrated that electric transport in Bi‐deficient Bi_1‐δFeO₃ ferroelectric thin films, which act as a p‐type semiconductor, can be continuously and reversibly controlled by manipulating ferroelectric domains. Ferroelectric domain configuration is modified by applying a weak voltage stress to Pt/Bi_1‐δFeO₃/SrRuO₃ thin‐film capacitors. This results in diode behavior in macroscopic charge‐transport properties as well as shrinkage of polarization‐voltage hysteresis loops. The forward current density depends on the voltage stress time controlling the domain configuration in the Bi_1‐δFeO₃ film. Piezoresponse force microscopy shows that the density of head‐to‐head/tail‐to‐tail unpenetrating local domains created by the voltage stress is directly related to the continuous modification of the charge transport and the diode effect. The control of charge transport is discussed in conjunction with polarization‐dependent interfacial barriers and charge trapping at the non‐neutral domain walls of unpenetrating tail‐to‐tail domains. Because domain walls in Bi_1‐δFeO₃ act as local conducting paths for charge transport, the domain‐wall‐mediated charge transport can be extended to ferroelectric resistive nonvolatile memories and nanochannel field‐effect transistors with high performances conceptually.     

Low‐Temperature Processable High‐Performance Electrochemically Deposited p‐Type Cuprous Oxides Achieved by Incorporating a Small Amount of Antimony

The development of an electrochemically robust method for the low‐temperature deposition of cuprous oxide (Cu₂O) thin films with reliable and conductive p‐type characteristics could yield breakthroughs in earth abundant and ecofriendly all oxide‐based photoelectronic devices. The incorporation of the group‐V element antimony (Sb) in the solution‐based electrodeposition process has been investigated. A small amount of Sb (1.2 at%) in the Cu₂O resulted in rapid nucleation and coalescence at the initial stage of electrochemical reaction, and finally made the surface morphology smooth in 2D. The growth behavior changed due to Sb addition and produced a strong diffraction intensity, single‐domain‐like diffraction patterns, and low angle tilt boundaries in the Cu₂O:Sb film, implying extremely improved crystallinity. As a result, these films exhibited extraordinary optical transmittance and band‐to‐band photoluminescence emission as well as higher electrical conductivity. The Cu/Cu₂O:Sb Schottky diode showed good rectifying characteristics and more sensible photoresponsibility.     

Patterning of Flexible Transparent Thin‐Film Transistors with Solution‐Processed ZnO Using the Binary Solvent Mixture

Flexible transparent thin‐film transistors (TTFTs) have emerged as next‐generation transistors because of their applicability in transparent electronic devices. In particular, the major driving force behind solution‐processed zinc oxide film research is its prospective use in printing for electronics. Since the patterning that prevents current leakage and crosstalk noise is essential to fabricate TTFTs, the need for sophisticated patterning methods is critical. In patterning solution‐processed ZnO thin films, several points require careful consideration. In general, as these thin films have a porous structure, conventional patterning based on photolithography causes loss of film performance. In addition, as controlling the drying process is very subtle and cumbersome, it is difficult to fabricate ZnO semiconductor films with robust fidelity through selective printing or patterning. Therefore, we have developed a simple selective patterning method using a substrate pre‐patterned through bond breakage of poly(methyl methacrylate) (PMMA), as well as a new developing method using a toluene–methanol mixture as a binary solvent mixture.     

Modelling of the thermal behaviour of an ultracapacitor for a 42-V automotive electrical system

A three-dimensional modelling approach is used to study the effects of operating and ambient conditions on the thermal behaviour of a NESSCAP 2.7 V/3500 F ultracapacitor cell for a 42-V automotive electrical system. The rate of heat generation of the ultracapacitor during charge and discharge is measured with a calorimeter. The transient temperature distribution of the ultracapacitor during cycling is obtained by using the finite element method with an implicit predictor-multicorrector algorithm. The results show that the temperature of the ultracapacitor cell increases during the first 50 cycles after which it reaches a periodic steady-state value that increases with increasing ambient temperature.     

Nonlinear support vector machine visualization for risk factor analysis using nomograms and localized radial basis function kernels

Nonlinear classifiers, e.g., support vector machines (SVMs) with radial basis function (RBF) kernels, have been used widely for automatic diagnosis of diseases because of their high accuracies. However, it is difficult to visualize the classifiers, and thus difficult to provide intuitive interpretation of results to physicians. We developed a new nonlinear kernel, the localized radial basis function (LRBF) kernel, and new visualization system visualization for risk factor analysis (VRIFA) that applies a nomogram and LRBF kernel to visualize the results of nonlinear SVMs and improve the interpretability of results while maintaining high prediction accuracy. Three representative medical datasets from the University of California, Irvine repository and Statlog dataset-breast cancer, diabetes, and heart disease datasets-were used to evaluate the system. The results showed that the classification performance of the LRBF is comparable with that of the RBF, and the LRBF is easy to visualize via a nomogram. Our study also showed that the LRBF kernel is less sensitive to noise features than the RBF kernel, whereas the LRBF kernel degrades the prediction accuracy more when important features are eliminated. We demonstrated the VRIFA system, which visualizes the results of linear and nonlinear SVMs with LRBF kernels, on the three datasets.     

Measurements of coupling and reflection characteristics of butt-joints in passive waveguide integrated laser diodes

Amplified spontaneous emission (ASE) spectra of passive waveguide integrated lasers have been studied to estimate the coupling efficiency and the reflectivity at the butt-joints between active and passive waveguides. A new method has been proposed for the analysis of ASE to extract the coupling efficiency and reflectivity at the butt-joints. This method was applied experimentally to estimate the coupling and reflection of the passive waveguide integrated lasers with different amounts of vertical misalignments of active and passive waveguides.     

Multi-antenna scheme for high capacity transmission in the digital audio broadcasting

In this paper, we apply multi-antenna scheme to DAB system for high-rate transmission. In the MIMO-DAB system with a number of transmitting and receiving antennas increases the transmission rate efficiently with low multiplication operations. For channel estimation in the MIMO-DAB system, we propose a new PRS structure and evaluate the channel estimation performance. The proposed PRS structure can estimate multi-channel information based on the semi-blind processing. The performance of proposed PRS is compared with that of conventional training sequence employing Tarokh's transmission matrix. And also we investigate the performance limitation due to the imperfect channel estimation in a MIMO-DAB receiver. It has been shown that the MIMO-DAB system with multi-antennas can achieve the high-rate transmission for multimedia broadcasting and the performance of MIMO-DAB system is impaired by imperfect channel information.