Effect of hydroxyl density on condensation behaviors of self-assembled monolayers and performance of pentacene-base organic thin-film transistors

A series of self-assembled monolayers (SAMs), comprising octadecyltrichlorosilane (ODTS), dodecyltrichlorosilane (DDTS), and hexamethyldisilazane (HMDS), were prepared to examine the effects of phase states and condensation behaviors of SAMs on the morphologies and performance of pentacene-based organic field-effect transistors (OFETs) by means of Fourier Transform Infrared (FT-IR) spectrometer, atomic force microscope (AFM), X-ray diffraction (XRD), and semiconductor parameter analyzer. Experimental results reveal that the treatment of SiO₂ substrates with O₂ plasma (denoted as O₂-SiO₂) and the preparation temperature of SAMs dramatically influence the morphologies of SAMs and the performance of corresponding pentacene-based (no purification) OFETs. When the SAMs were prepared at 30 °C, the OFET based on ODTS-treated O₂-SiO₂ substrate had the highest hole mobility, reaching as large as 1.15 cm² V^?1 s^?1, and an on/off current ratio in excess of 10⁵; these values are both much larger than those of a device based on ODTS-modified SiO₂ substrates without O₂ plasma treatment and O₂-SiO₂ substrates modified by ODTS SAMs prepared at other temperatures. OFETs based on O₂-SiO₂ substrates that were modified by DDTS and HMDS SAMs prepared at 4 °C performed best.     

QoS‐aware routing and power control algorithm for multimedia service over multi‐hop mobile ad hoc network

This paper presents a QoS (quality of service) aware routing and power control algorithm consuming low transmission power for multimedia service over mobile ad hoc network. Generally, multimedia services need stringent QoS over the network. However, it is not easy to guarantee the QoS over mobile ad hoc network since its network resources are very limited and time‐varying. Furthermore, only a limited amount of power is available at mobile nodes, which makes the problem more challenging. We propose an effective routing and power control algorithm for multimedia services that satisfies end‐to‐end delay constraint with low transmission power consumption. The proposed algorithm supports the required bandwidth by controlling each link channel quality over route in a tolerable range. In addition, a simple but effective route maintenance mechanism is implemented to avoid link failures that may significantly degrade streaming video quality. Finally, performance comparison with existing algorithms is presented in respect to traditional routing performance metrics, and an achievable video quality comparison is provided to demonstrate the superiority of the proposed algorithm for multimedia services over mobile ad hoc network. Copyright © 2010 John Wiley & Sons, Ltd.     

无铅BGA封装可靠性的力学试验与分析

着重研究了机械冲击和应力对无铅BGA封装焊点可靠性的影响,介绍了BGA封装的可靠性力学试验(跌落、弯曲试验)及其分析方法.通过对力学试验中失效焊点的分析以及借助ANSYS模拟工具,找出引起失效的根本原因,为开发性能更好、高可靠性的无铅材料、改进无铅工艺提供依据.     

Mechanical bending of flexible complementary inverters based on organic and oxide thin film transistors

Flexible complementary inverters composed of p-channel pentacene thin-film transistors (TFTs) and n-channel amorphous indium gallium zinc oxide TFTs were fabricated on polymer substrates. The characteristics of the TFTs and inverters were evaluated at different bending radii. Throughout the bending experiments, the relationship between the performances of the inverters and the characteristics of the TFTs under mechanical deformation was analyzed. The mechanically applied strain led to a change in the voltage transfer characteristics of the complementary inverters, as well as the source–drain saturation current, field-effect mobility and threshold voltage of the TFTs. The switching threshold voltage of the fabricated inverters decreased with decreasing bending radius, which was related to changes in the field-effect mobility and the threshold voltage of the TFTs.     

Determination of the interface energy level alignment of a doped organic hetero-junction using capacitance–voltage measurements

A simple method based on capacitance–voltage (C–V) measurements is reported to determine the interface energy level alignment at the junction of 15 mol% Cs₂CO₃ doped 4,7-diphenyl-1,10-phenanthroline (BPhen) and 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HATCN) fabricated under high vacuum. The junction properties, such as the depletion layer thickness, built-in potentials and vacuum level shift were calculated with simple Mott–Schottky and Poisson’s equations with the boundary condition of a continuous electric flux density using the information from the C–V data. The interface energy level alignment determined by this method is well matched with the one determined using the in situ ultraviolet photoemission spectroscopy (UPS) and X-ray photoemission spectroscopy (XPS) experiments performed under ultra-high vacuum. This method can be applied to other semiconductor junctions such as the organic p–n homojunctions and heterojunctions with known energy levels, as long as the metal/semiconductor contact is Ohmic without referring to the photoemission spectroscopies. Moreover, the energy level alignment determined by the C–V measurement gives a more realistic result since the films for the measurements are formed under high vacuum which is a normal device fabrication environment rather than under ultra high vacuum.     

Improving the R-score of an adaptive VoIP codec in IEEE 802.16 networks

Worldwide Interoperability for Microwave Access (WiMAX) technology, which is based on the IEEE 802.16 standard, supports different quality of service (QoS) for different services. WiMAX is expected to support QoS in real-time applications such as Voice over Internet Protocol (VoIP). When network congestion occurs, the VoIP bit rate needs to be adjusted to achieve the best speech quality. In this study, we propose a new scheme called Adaptive VoIP Level Coding (AVLC). This scheme takes into consideration network conditions (packet delay and packet loss) and a connection’s modulation scheme. The amount of data that can be transmitted increases with the speed of the modulation scheme. When network congestion occurs, AVLC scheme prioritizes reducing the bit rate of a connection that has a slower modulation scheme to mitigate congestion. Depending on network conditions, such as modulation scheme, packet delay, packet loss, and residual time slot, we use the G.722.2 codec to adjust each connection’s bit rate. Simulations are conducted to test the performance (network delay, packet loss, number of modulation symbols, and R-score) of the proposed scheme. The simulation results indicate that speech quality is improved by the use of AVLC.     

Name‐Based Autoconfiguration for Mobile Ad hoc Networks

In a mobile ad hoc network, difficulties exist in supporting address autoconfiguration and naming resolution due to the lack of centralized servers. This letter presents a novel approach, called name‐based autoconfiguration (NBA), which uses host names to determine IP addresses and provides address autoconfiguration and name resolution as a single protocol.     

Performance evaluation of fault-branch detection in TDM passive optical networks by spectral analysis of interferometric signals

A new fault-branch detection scheme is proposed to troubleshoot the breaks of any distribution fibers in a time-division multiplexing (TDM) passive optical network. We employ a continuous optical frequency sweeper at the optical line terminal (OLT) and an interferometric (IF) device at each optical network unit (ONU). By analyzing the spectrum of the returned combined signals at the OLT, we can obtain the status of all branches. This detection method not only uses a small optical frequency band for surveillance monitoring, but is also simple to operate. Furthermore, a modified architecture is proposed to relax the specifications of IF devices. The tolerance of the IF device length was analyzed using the Monte–Carlo simulation method.     

Erase voltage impact on 0.18μm triple self-aligned split-gate flash memory endurance

The erase voltage impact on the 0.18μm triple self-aligned split-gate flash endurance is studied.An optimized erase voltage is necessary in order to achieve the best endurance.A lower erase voltage can cause more cell current degradation by increasing its sensitivity to the floating gate voltage drop,which is induced by tunnel oxide charge trapping during program/erase cycling.A higher erase voltage also aggravates the endurance degradation by introducing select gate oxide charge trapping.A progressive erase voltage method is proposed and demonstrated to better balance the two degradation mechanisms and thus further improve endurance performance.     

Node distribution-based localization for large-scale wireless sensor networks

Distributed localization algorithms are required for large-scale wireless sensor network applications. In this paper, we introduce an efficient algorithm, termed node distribution-based localization (NDBL), which emphasizes simple refinement and low system-load for low-cost and low-rate wireless sensors. Each node adaptively chooses neighboring nodes, updates its position estimate by minimizing a local cost-function, and then passes this updated position to neighboring nodes. This update process uses a node distribution that has the same density per unit area as large-scale networks. Neighbor nodes are selected from the range in which the strength of received signals is greater than an experimentally based threshold. Based on results of a MATLAB simulation, the proposed algorithm was more accurate than trilateration and less complex than multi-dimensional scaling. Numerically, the mean distance error of the NDBL algorithm is 1.08–5.51 less than that of distributed weighted multi-dimensional scaling (dwMDS). Implementation of the algorithm using MicaZ with TinyOS-2.x confirmed the practicality of the proposed algorithm.