Functional copolymer/organo‐MMT nanoarchitectures. II. Dynamic mechanical behavior of poly(MA‐co‐BMA)s‐organo‐MMT clay nanocomposites

Functional copolymer/organo‐silicate [N,N′‐dimethyldodecyl ammonium cation surface modified montmorillonite (MMT)] layered nanocomposites have been synthesized by interlamellar complex‐radical copolymerization of preintercalated maleic anhydride (MA)/ organo‐MMT complex as a ‘nano‐reactor’ with n‐butyl methacrylate (BMA) as an internal plasticization comonomer in the presence of radical initiator. Synthesized copolymers and their nanocomposites were investigated by dynamic mechanic analysis, X‐ray diffraction, SEM, and TEM methods. It was found that nanocomposite dynamic mechanical properties strongly depend on the force of interfacial MA … organo‐MMT complex formation and the amount of flexible n‐butyl ester linkages. An increase in both of these parameters leads to enhanced intercalation and exfoliation in situ processes of copolymer chains and the formation of hybrid nanocomposites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Removal of boron from aqueous solution by adsorption on Al2O3 based materials using full factorial design

This paper aims the adsorption of boron from aqueous solution onto Siral 30 and Pural using 2³ full factorial design. The effect of individual variables and their interactional effects for boron adsorption were also determined. From the statistical analysis, it is inferred that as pH and temperature increased boron adsorption from aqueous solution decreased. Siral 30 was found to be more efficient adsorbent than Pural. The unimportant factor affecting boron adsorption from aqueous solution was also verified by using Fisher adequacy test. At the 90% confidence level, the type of adsorbent, temperature and type of adsorbent–temperature interaction was effective on boron adsorption from aqueous solution. The experimental results were fitted to the Langmuir, Freundlich and Dubinin–Radushkevich (DR) equations to find out adsorption capacities. In most cases, the results indicate that Freundlich and DR equations are well described with the sorption data. The adsorption capacity values of Siral 30 calculated from Freundlich and DR equation was greater than that of Pural. The thermodynamic parameters were also estimated and the adsorption process was not spontaneous nature.     

New metal chelate sorbent for albumin adsorption: Cibacron Blue F3GA-Zn(II) attached microporous poly(HEMA) membranes

Poly(2-hydroxyethyl methacrylate) [poly(HEMA)] membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azobis-isobutyronitrile, AIBN). The triazine dye Cibacron Blue F3GA was attached as an affinity ligand to poly(HEMA) membranes, covalently. These affinity membranes with a swelling ratio of 58% and containing 10.7 mmol Cibacron Blue F3GA/m² were used in the albumin adsorption studies. After dye-attachment, Zn(II) ions were chelated within the membranes via attached-dye molecules. Different amounts of Zn(II) ions [650–1440 mg Zn(II)/m²] were loaded on the membranes by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these membranes from aqueous solutions containing different amounts of BSA at different pH was investigated in batch reactors. The nonspecific adsorption of BSA on the poly(HEMA) membranes was negligible. Cibacron Blue F3GA attachment significantly increased the BSA adsorption up to 92.1 mg BSA/m². Adsorption capacity was further increased when Zn(II) ions were attached (up to 144.8 mg BSA m²). More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 0.5M NaSCN at pH 8.0 and 0.025M EDTA at pH 4.9. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 657–664, 1998     

新的分析仪器在中国纺织厂的应用经验

<正>1介绍质量的许多定义之一是产品的某些属性满足客户或是用户的需要,对纺织工艺来说,质量常常通过纤维、纱线或是织物的不同属性来定义,这些属性必须得到系统的控制。     

An analysis of used lubricant recycling unit in Turkey

In chemical industries such as lube oil recycling units, stakeholders seek to continuously increase the productivity and profitability of the chemical processes to survive in the market. While scholars have investigated technological production options, recycling, and lube oil recycling flows, there is not enough study that evaluates the interplay between the production volume allocation and the recycled oil quality and quantity contingent upon the process temperature and pressure. The results based on a case study in the Kayalar Dorse production in Turkey show that by optimizing the chemical process mix, the volume of the lubricant oil can be increased by 20% at almost zero variable cost increase.     

Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

Use of o-phenylene dioxydiacetic acid impregnated in Amberlite XAD resin for separation and preconcentration of uranium(VI) and thorium(IV)

The impregnation of o-phenylene dioxydiacetic acid (OPDA) into a polymeric matrix, Amberlite XAD-2000, is reported and was characterized by infrared spectroscopy. The amount of attached OPDA to the polymer resin was found to be 1.77mmolg(-1) resin. The resin was used for the sorption of U(VI) and Th(IV) from aqueous solution. This sorbent was capable of preconcentrating U(VI) and Th(IV) from weakly acidic or neutral solution. The retained metals were eluted sequentially using 0.25molL(-1) HCl for U(VI) and 1molL(-1) HCl for Th(IV) and determined spectrophotometrically using arsenazo-(III). The capacity of the resin for U(VI) and Th(IV) was found to be 0.121 and 0.113mmolg(-1), respectively. The impregnated resin exhibits a high chemical stability, reusability and fast equilibration. The method was used for the determination of U(VI) and Th(IV) in synthetic samples and rock samples.