Offsite Manufacturing in the Construction Industry for Productivity Improvement

Offsite manufacturing (OSM) is believed to be an alternative means of improving construction productivity. However, OSM has attracted limited attention from researchers and industry stakeholders, particularly in developing countries. Therefore, this study considers the key factors hindering the industry-wide adoption of OSM in the Cambodian context. A survey conducted with 75 construction practitioners asked respondents to quantify the level of influence from 30 constraints pertaining to OSM. Multi-attribute utility and correlation coefficient analyses were used to statistically analyze the data. Six broad categories of constraints to adopting OSM underlie the challenges facing the local industry: project planning and methodology, construction cost, construction industry and culture, skill and shortage, supply chain and logistics, and construction site operations. The findings may be useful for construction engineering professionals seeking ways to improve construction productivity performance by implementing OSM as an alternative technique in developing countries.     

On the improvement of a scalable sparse direct solver for unsymmetrical linear equations

This paper focuses on the application level improvements in a sparse direct solver specifically used for large-scale unsymmetrical linear equations resulting from unstructured mesh discretization of coupled elliptic/hyperbolic PDEs. Existing sparse direct solvers are designed for distributed server systems taking advantage of both distributed memory and processing units. We conducted extensive numerical experiments with three state-of-the-art direct linear solvers that can work on distributed-memory parallel architectures; namely, MUMPS (MUMPS solver website, http://graal.ens-lyon.fr/MUMPS), WSMP (Technical Report TR RC-21886, IBM, Watson Research Center, Yorktown Heights, 2000), and SUPERLU_DIST (ACM Trans Math Softw 29(2):110–140, 2003). The performance of these solvers was analyzed in detail, using advanced analysis tools such as Tuning and Analysis Utilities (TAU) and Performance Application Programming Interface (PAPI). The performance is evaluated with respect to robustness, speed, scalability, and efficiency in CPU and memory usage. We have determined application level issues that we believe they can improve the performance of a distributed-shared memory hybrid variant of this solver, which is proposed as an alternative solver [SuperLU_MCDT (Many-Core Distributed)] in this paper. The new solver utilizing the MPI/OpenMP hybrid programming is specifically tuned to handle large unsymmetrical systems arising in reservoir simulations so that higher performance and better scalability can be achieved for a large distributed computing system with many nodes of multicore processors. Two main tasks are accomplished during this study: (i) comparisons of public domain solver algorithms; existing state-of-the-art direct sparse linear system solvers are investigated and their performance and weaknesses based on test cases are analyzed, (ii) improvement of direct sparse solver algorithm (SuperLU_MCDT) for many-core distributed systems is achieved. We provided results of numerical tests that were run on up to 16,384 cores, and used many sets of test matrices for reservoir simulations with unstructured meshes. The numerical results showed that SuperLU_MCDT can outperform SuperLU_DIST 3.3 in terms of both speed and robustness.     

Analysis of Protective Behavior and Security Incidents for Home Computers

This study analyzes the factors that affect security protective behavior and perceived security incidents. Protective behavior is found to have a positive impact on the perceived security incidents, especially for the more educated home computer user. Human factors such as “perceived barriers” (to use new security software tools), “self-efficacy” (confidence), and “cues to action” (awareness) are found to influence both the protective behavior and perceived security incidents.     

Magnetization and magnetoresistance of common alloy wires used in cryogenic instrumentation

We present magnetization and magnetoresistance data at liquid-helium and liquid-nitrogen temperatures for wire materials commonly used for instrumentation wiring of specimens, sensors, and heaters in cryogenic probes. The magnetic susceptibilities in Systeme International units at 4.2 K were found to be: Manganin 1.25x10(-2), Nichrome 5.6x10(-3), and phosphor bronze -3.3x10(-5), indicating that phosphor bronze is the most suitable for high-field applications. We also show the ferromagnetic hysteresis loop of Constantan wire at liquid-helium temperature. The magnetoresistance of these four wires was relatively small: the changes in resistance at 4 K due to a 10 T transverse magnetic field are -2.56% for Constantan, -2.83% for Manganin, +0.69% for Nichrome, and +4.5% for phosphor bronze, compared to about +188% for a typical copper wire under the same conditions.     

Comparison on abrasive wear of SiCrFe, CrFeC and Al2O3 reinforced Al2024 MMCs

The effects of volume fraction and size of SiCrFe, CrFeC, and Al₂O₃ particulates on the abrasive wear rate of compo-casted Al2024 metal matrix composites (MMCs) were studied. The process variables like the stirring speed, position and the diameter of the stirrer have affected the diffusion between particulates and matrix.The abrasive wear rate was decreased by the increase in particulate volume fraction of SiCrFe and CrFeC intermetallic reinforced composites over 80 grade SiC abrasive paper. The wear rates of the all composites decreased with aging treatment, and the best result was seen for the composite having a hybrite structure as SiCrFe and CrFeC particulates together. Nevertheless, the fabrication of composites containing soft particles as copper favors a reduction in the friction coefficient.     

Synthesis of opaque and colored hollow polymer pigments

A parametric study was carried out to investigate the effects of process parameters on the properties of opaque and/or colored polymer pigment. The core was synthesized using methyl methacrylate (MMA), methacrylic acid (MAA), and ethylene glycol dimethacrylate, and the shell from styrene. The surfactant/water (S/W) ratio was changed between 0.56 and 1.46, and the best ratio was determined to be 0.97. The increase in the amount of MAA and the pH of the medium increases the diameter of the swollen particles. The hollows could form only when the fraction of MAA in the monomer mixture was above 10%, and pH ≥ 10. The opaque pigment with the largest diameter could be obtained at the S/W ratio of 0.97 and the MAA content of 20%, as 350 nm. It gave an opacity value of 93.8% when mixed with an acrylic resin at 50% by volume. The colored opaque polymer pigments were synthesized by adding copper phthalocyanine into the monomer mixture. The addition of 2% copper phthalocyanine yielded a green‐blue color but 3% yielded blue color. The latter yielded a change in the lightness by a value of ?31.49, and a total color difference of 30.05 compared with that of white opaque polymer pigment. POLYM. ENG. SCI., 57:913–920, 2017. © 2016 Society of Plastics Engineers     

Niobium boride coating on AISI M2 steel by boro-niobizing treatment

In this study, niobium boride coating was applied on pre-boronized AISI M2 steel by the thermo-reactive deposition technique in a powder mixture consisting of ferro-niobium, ammonium chloride and alumina at 950 °C for 1-4 h. The coated samples were characterized by X-ray diffraction, scanning electron microscope and micro-hardness tests. Niobium boride layer formed on the pre-boronized AISI M2 steel was smooth, compact and homogeneous. X-ray studies showed that the phases formed on the steel surfaces are NbB, Nb₃B₂, FeB and Fe₂B. The depth of the niobium boride layer ranged from 0.97 μm to 3.25 μm, depending on treatment time. The higher the treatment time the thicker the niobium boride layer observed. The hardness of the niobium boride layer was 2738 ± 353 HV_0.01.     

Hydrogen‐Bonded Organic Semiconductors as Stable Photoelectrocatalysts for Efficient Hydrogen Peroxide Photosynthesis

Research on semiconductor photocatalysts for the conversion of solar energy into chemical fuels has been at the forefront of renewable energy technologies. Water splitting to produce H₂ and CO₂ reduction to hydrocarbons are the two prominent approaches. A lesser‐known process, the conversion of solar energy into the versatile high‐energy product H₂O₂ via reduction of O₂ has been proposed as an alternative concept. Semiconductor photoelectrodes for the direct photosynthesis of H₂O₂ from O₂ have not been applied up to now. Photoelectrocatalytic oxygen reduction to peroxides in aqueous electrolytes by hydrogen‐bonded organic semiconductor is observed photoelectrodes. These materials have been found to be remarkably stable operating in a photoelectrochemical cell converting light into H₂O₂ under constant illumination for at least several days, functioning in a pH range from 1 to 12. This is the first report of a semiconductor photoelectrode for H₂O₂ production, with catalytic performance exceeding prior reports on photocatalysts by one to two orders of magnitude in terms of peroxide yield/catalyst amount/time. The combination of a strongly reducing conduction band energy level with stability in aqueous electrolytes opens new avenues for this widely available materials class in the field of photo(electro) catalysis.     

Mechanical properties of bovine hydroxyapatite (BHA) composites doped with SiO<Subscript>2</Subscript>, MgO,Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, and ZrO<Subscript>2</Subscript>

Biologically derived hydroxyapatite from calcinated (at 850 °C) bovine bones (BHA) was doped with 5 wt% and 10 wt% of SiO₂, MgO, Al₂O₃ and ZrO₂ (stabilized with 8% Y₂O₃). The aim was to improve the sintering ability and the mechanical properties (compression strength and hardness) of the resultant BHA-composites. Cylindrical samples were sintered at several temperatures between 1,000 and 1,300 °C for 4 h in air. The experimental results showed that sintering generally occurs at 1,200 °C. The BHA–MgO composites showed the best sintering performance. In the BHA–SiO₂ composites, extended formation of glassy phase occurred at 1,300 °C, resulting in structural degradation of the resultant samples. No sound reinforcement was achieved in the case of doping with Al₂O₃ and zirconia probably due to the big gap between the optimum sintering temperatures of BHA and these two oxides.