Large-area organic photovoltaic module—Fabrication and performance

Here we describe the fabrication of the largest (233 cm² total area) organic photovoltaic (OPV) module (polymer:fullerene) to be certified by the National Renewable Energy Laboratory (NREL). OPV solar cells were fabricated at Plextronics by spin coating a blend of poly 3-hexylthiophene-2,5 diyl (P3HT) and [6,6] phenyl C₆₁ butyric acid methyl ester (PCBM) on top of our hole transport layer (HTL), Plexcore^® OC. In laboratory-scale devices (0.09 cm²), this system routinely exhibits power conversion efficiencies exceeding 3.7%. This P3HT:PCBM active layer and HTL ink system was used to scale up to the larger area module (15.2 cm×15.2 cm module size, i.e. 233 cm² total area; 108 cm² active area), which was certified by NREL as having 1.1% total area efficiency (3.4% active area efficiency).     

Alkynes Carbonylation Reactions in Solutions of Palladium Complexes as a New Class of Oscillatory Processes

This article dedicated to study of few oscillating reactions in homogeneous systems. The experimental data and preliminary mechanism are reported. The authors affirm they find new type of oscillating processes—the reactions of carbonylation.     

Fracture barrier estimation by the edge fracture test method

Known methods for determining the fracture resistance of brittle materials by indentation flaking of the rectangular specimen edge are compared. The edge fracture (EF) test method was chosen as an optimum one. The investigations demonstrated that silicon carbide ceramics, submicrometre alumina, and glasses possessed fracture resistance (F_R) values that can be located above the baseline in the EF base diagram. These results emphasize that the above materials display a higher resistance to the onset of fracture (fracture barrier). This barrier can be estimated by comparing EF test data resulting from Rockwell and Vickers indentations.     

Sensitivities of ozone and fine particulate matter formation to emissions under the impact of potential future climate change

Impact of climate change alone and in combination with currently planned emission control strategies are investigated to quantify effectiveness in decreasing regional ozone and PM2.5 over the continental U.S. using MM5, SMOKE, and CMAQ with DDM-3D. Sensitivities of ozone and PM2.5 formation to precursor emissions are found to change only slightly in response to climate change. In many cases, mass per ton sensitivities to NO(x) and SO2 controls are predicted to be greater in the future due to both the lower emissions as well as climate, suggesting that current control strategies based on reducing such emissions will continue to be effective in decreasing ground-level ozone and PM2.5 concentrations. SO2 emission controls are predicted to be most beneficial for decreasing summertime PM2.5 levels, whereas controls of NO(x) emissions are effective in winter. Spatial distributions of sensitivities are also found to be only slightly affected assuming no changes in land-use. Contributions of biogenic VOC emissions to PM2.5 formation are simulated to be more important in the future because of higher temperatures, higher biogenic emissions, and lower anthropogenic NO(x) and SO2 emissions.     

Control of dynamic microsystems

This paper formulates and solves control problems for nonlinear microsystems which comprise micro-electromechanical devices, micromachined transducers and microelectronics. We perform a consistent dynamic analysis and coherent designs with a minimum level of simplifications using high-fidelity mathematical models. The proposed methodology enables practical implementation for multi-input/multi-output systems due to overall conceptual consistency, design coherence, computational efficiency, algorithmic effectiveness and hardware simplicity. Various issues in nonlinear analysis and control are examined and experimentally verified substantiating design concepts for high-performance microsystems. The reported findings are demonstrated for a proof-of-concept closed-loop electrostatic microactuator.     

Application of the wavelet transform for feature extraction in the analysis of hyperspectral laser-induced fluorescence data

Remote-sensing approaches for environmental protection and exploration have evolved rapidly in the last decade. Among the new operational tools, hyperspectral Fluorescent LiDAR System (FLS®) lidar has demonstrated a high sensitivity and the ability to function in complex environments for real-time, robust oil-spill monitoring on airborne or ship-borne analytical platforms. The capabilities of such analytical platforms include real-time analysis of laser-induced fluorescence (LIF) data. Although numerous examples of the application of signal theory to the analysis of hyperspectral data appear in the remote-sensing literature, the conventional data analysis strategies are not well adapted to the practical issues of the LIF applications. The aim of this article is to provide a new approach for LIF lidar analytical platforms, which is focused on the specifics of hyperspectral LIF data. The approach is based on structural data analysis and interpretation, through which more detailed spectral matching is performed. This article is based on a simulated experiment in which the spectra of actual seawater and well-known types of petroleum products were combined to demonstrate the wavelet-transform-based analysis of LIF data. The final part of the article demonstrates the application of the wavelet transform to the structural analysis of LIF data from field experiments for the detection and identification of oil products in difficult environmental conditions.     

Congratulations to Vladimir Viktorovich Baulin

Soil Mechanics and Foundation Engineering -     

Molar enthalpy of vaporization of ethanol-gasoline mixtures and their colloid state

Vapour pressure measurements are used to evaluate the enthalpy of vaporization of ethanol-gasoline mixtures. Partial molar values are also derived. The dispersed structure of ethanol-gasoline fuel is studied for the first time using the method of correlation spectroscopy of scattered light. A large range of dispersed particle sizes in different alcohol-gasoline systems is found. The dependence of the mean radius of drops on ethanol content is determined. It is found that coalescence phenomenon occurs in the systems when extra ethanol is added.     

Use of photodegradable inhibitors in UV-curable compositions to form polymeric 2D-structures by visible light

The process of two-wave photopolymerization of a UV-curable composition with an optically degrading inhibitor is considered. By numerical simulation, it is shown that in the composition layer uniformly exposed to UV-radiation, such systems allow getting segments with different conversion under the action of inhomogeneous visible light. Based on the data on the photopolymerization kinetics of the compositions from triethylene glycol dimethacrylate (TEGDMA) and bisphenol-A glycidyl dimethacrylate (bis-GMA) with the UV-initiator 2,2-dimethoxy-2-phenylacetophenone (DMPA), it was shown that 3,5-di-tert-butyl-o-benzoquinone (35Q) with N,N-dimethylaniline (DMA, “Aldrich”, 99%) can serve as an inhibitor that degrades under action of visible radiation. Combining inhomogeneous visible light generated with a conventional DLP-projector and uniform UV-radiation of LED (365 nm) the two-wave lithographic process was implemented to create polymeric 2D-structures in 20 μm layer of the compositions from TEGDMA (70)/bis-GMA (30)/DMPA (0.05 wt%)/35Q (0.5 wt%)/DMA (1 wt%).