Average block error probability in the reverse link of a packetDS/CDMA system under Rayleigh fading channel conditions

Analytic expressions have been derived for the probability density functions of the total signal-to-interference ratio when considering mixed-type interference sources in the reverse link of a DS/CDMA packet radio system with Rayleigh fading. Four different scenarios were studied, and the corresponding expressions are presented for each situation. The users are divided into two groups: those that apply a closed-loop power control and those that only use an open-loop power control. By making use of these expressions, the mean block error probability is derived as a function of the number of total interfering users in each group     

Controlled-resistance loads for induction heating applications using thin non-magnetic metallic layers

The design of controlled-resistance loads for domestic induction heating applications using thin non-magnetic conductive layers is described. Thin metallic layers are fabricated using the phase vapour deposition technique. Such layers would enable vessels, the inductive behaviour of which was similar to those fabricated with conventional ferromagnetic bulk materials, to be manufactured. Optimum layer thickness is investigated using an analytical impedance model of the complete induction system     

Criterion for signal extraction in underdetermined mixtures of bounded support

This work studies the problem of recovering a complex signal (source) from an underdetermined linear mixture of bounded sources. We assume some a priori information of the desired signal in the form of a training sequence and complete absence of knowledge from the other sources, except for their bounded character. The main contribution of this letter is the proposal of a bounded component analysis of the training error that tries to condense the relevant information of the observations in a linear estimate of the desired signal. This subspace can be later used for subsequent refined estimation of the signal of interest. Simulations corroborate the good performance of the proposed method in high SNR scenarios.     

A Single-Stage High-Power-Factor Electronic Ballast Based on Integrated Buck Flyback Converter to Supply Metal Halide Lamps

In this paper, a novel single-stage electronic ballast with a high power factor is presented. The ballast circuit is based on the integration of a buck converter to provide the power factor correction, and a flyback converter to control the lamp power and to supply the lamp with a low-frequency square-waveform current. Both converters work in discontinuous conduction mode, which simplifies the control. In spite of being an integrated topology, the circuit does not present additional stress of voltage or current in the main switch, which handles only the flyback or buck current, depending on the operation mode. To supply the lamp with a low-frequency square-wave current to avoid acoustic resonances, the flyback has two secondary windings that operate complementarily at a low frequency. The design procedure of the converters is also detailed. Experimental results from a 35-W metal halide lamp are presented, where the proposed ballast reached a power factor of 0.95, a total harmonic distortion of 30% (complying with IEC 61000-3-2), and an efficiency of 90%.     

White Electroluminescence by Supramolecular Control of Energy Transfer in Blends of Organic‐Soluble Encapsulated Polyfluorenes

Here, it is demonstrated that energy transfer in a blend of semiconducting polymers can be strongly reduced by non‐covalent encapsulation of one constituent, ensured by threading of the conjugated strands into functionalized cyclodextrins. Such macrocycles control the minimum intermolecular distance of chromophores with similar alignment, at the nanoscale, and therefore the relevant energy transfer rates, thus enabling fabrication of white‐light‐emitting diodes (CIE coordinates: x = 0.282, y = 0.336). In particular, white electroluminescence in a binary blend of a blue‐emitting, organic‐soluble rotaxane based on a polyfluorene derivative and the green‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole ( F8BT ) is achieved. Morphological and structural analyses by atomic force microscopy, fluorescence mapping, µ‐Raman, and fluorescence lifetime microscopy are used to complement optical and electroluminescence characterization, and to enable a deeper insight into the properties of the novel blend.     

Dimming of High-Brightness LEDs by Means of Luminous Flux Thermal Estimation

Usually, pulsewidth modulation (PWM) operation is selected as the best dimming strategy to drive high-brightness LEDs. Nevertheless, to obtain an enhanced full linear dimming control of the device, the luminous flux should be measured. This paper proposes a control method based on an estimator of the luminous flux emitted by the LED. Based on the characterization of the LEDs, this estimator is defined. The estimator provides the flux value from only two temperature values (the case temperature and the ambient temperature). Once the estimator is validated, the electronic driver to supply the LEDs, as well as the digital control scheme, are presented. Such a control scheme is suitable for both AM and PWM dimming strategies. A prototype of the electronic driver has been built and tested, and experimental measurements of AM and PWM dimming are presented. It can be concluded that with the proposed estimator, the flux emitted by the LEDs can be accurately estimated. Thus, the output light control of the LEDs can be accomplished by sensing temperature rather than luminous flux. The final output characteristic of the system shows linearity between the output flux and the reference value, with AM as well as with PWM dimming of the LEDs.     

Use of β-hydroxyacyl-CoA-dehydrogenase (HADH) activity to differentiate frozen from unfrozen fish and shellfish

 Further work on an enzymic method to differentiate frozen from unfrozen fish and shellfish is reported. The method is based on the release of the β-hydroxyacyl-CoA-dehydrogenase (HADH) from mitochondria during freezing. Enzymic activity was evaluated in fresh and frozen thawed samples from sole (Solea solea), sea bream (Pagellus centrodontus), hake (Merluccius merluccius), gilt headed bream (Sparus aurata), sea bass (Dicentrarchus labrax), salmon (Salmo salar), prawn (Penaeus japonicus) and Norwegian lobster (Nephrops norvegicus). Changes in the HADH activity of fresh and frozen thawed samples were compared after freezing at –196  °C for 15 min. Two values were obtained: U (by dividing: HADH activity of samples frozen at –196  °C, then thawed/HADH activity of unfrozen samples) and F (by dividing: HADH activity of samples frozen at –18  °C, thawed, then frozen at –196  °C /HADH activity of samples frozen at –18  °C, then thawed). Statistical analysis showed significant differences (P≤0.05) between both quotients for gilt headed bream, salmon, sea bream, sole and prawn, and an arbitrary limit was set at 2 to differentiate frozen thawed from unfrozen samples. The application of this limit made it possible to discriminate the unfrozen from the frozen thawed state of around 90% of the total samples analysed. Best results were obtained for prawn (100% of samples differentiated). In the present paper, a laboratory routine is proposed based on the comparison of the HADH activity of a sample analysed straight away and that of a sample frozen at –196  °C and then thawed. The reported method is simple and fast. The entire laboratory procedure can be performed in 45 min. Received: 20 July 1998 / Revised version: 2 November 1998     

Sub-1 V band-gap based and MOS threshold-voltage based voltage references in 0.13 µm CMOS

Portable and implantable device applications require low supply voltage reference circuits due to increasing trend for lower power requirements. Voltage references have been proposed for operation below 1 V for CMOS and a comprehensive analysis of the behavior of the different topologies is needed for ultra-low power designs, in order to select the right circuit topology for a given requirement. This work compares two major classes of voltage reference topologies: threshold voltage (V_T0)-based and (V_G0) bandgap voltage-based reference circuits. Four different topologies of voltage-reference designs with 1-V supply were designed and fabricated in 130 nm CMOS process. Monte Carlo analysis shows the variability of the references and of their temperature coefficients (TC), and the results are compared to measured samples. Simulations and measurements show that the threshold voltage-based references are more susceptible to the variations in the CMOS fabrication process.     

Impact of growth rate on the quality of ZNS-MQW InGaAsP/InP laser structures grown by LP-MOVPE

We investigated the influence of the growth rate on the quality of zero-net-strained InGaAsP/InGaAsP/InP multiquantum well structures for 1.55 μm emission grown by low pressure metalorganic vapor phase epitaxy. The samples consisted of fixed compressive strained wells (ɛ=+1%) and tensile strained barriers (ɛ=−0.5%) grown with different quaternary bandgap wavelengths (λ_B=1.1–1.4 μm). Using higher growth rates, we obtained for the first time high quality zero net strained multi quantum well structures, regardless having constant group V composition in the well and barriers. The samples were analyzed by x-ray diffraction, photoluminescence and atomic force microscopy techniques. The amplitude of surface modulation roughness along [011] direction decreased from 20 nm to 0.53 nm with increasing growth rate and/or quaternary compositions grown outside the miscibility gap. A new deep PL broad emission band strongly correlated with the onset of wavy layer growth is also reported. Broad area and ridge waveguide lasers with 10 wells exhibited low losses (34 cm⁻¹) and low threshold current densities at infinite cavity length (1020 A·cm⁻² and 1190 A·cm⁻², respectively).     

Teaching communication skills to hearing-impaired children

The Mehida multimedia system offers hearing-impaired children an easy and appealing way to learn how to communicate with their hearing and deaf peers. Mehida helps them acquire various communication skills simultaneously: sign language, speech, fingerspelling, lip reading, reading, and writing. Didactic activities and games teach the different means of communication. A character shaped like a pear assists and guides the children, explaining each activity and encouraging the children to identify with it throughout the process