Rejection of As(III) and As(V) from arsenic contaminated water via electro-cross-flow negatively charged nanofiltration membrane system

A specially designed electro-cross-flow nanofiltration (NF) membrane system was used for this investigation. To enhance the rejection of arsenic ionic species like H₂AsO₄⁻, a NF membrane having a negative surface charge was fabricated via the interfacial polymerization process. The membrane was characterized by SEM, AFM, surface charge density, molecular weight cut-off (MWCO), total and skin thickness and pure water flux. The parameters that affected the rejections of As(III) and As(V) were studied; they included the initial arsenic concentration, the applied potential, pH of the feed, the cross-flow filtration pressure and the presence of different salts in the feed. Among those parameters, the pH of the feed greatly affected As(V) rejection; As(V) ([As(V)]_o = 1000 ppb) rejection was increased from 72.3 to 98.5% when pH of the feed was changed from 3.0 to 10.0. This might be due to the fact that higher pH enhanced the formation of negative divalent anion like HAsO₄²⁻ which should be rejected more effectively by the negative surface charge of the NF membrane. Beside the effect of the negative surface charge of the membrane, applied potential increased the As(V) rejection by 48.2% when the applied potential was increased from 0 to 2.0 V for a feed containing 1000 ppb initially. For the same change of applied potential rejection of As(III) was increased from 52.3 to 70.4%; this might be the result of the formation of anionic species like H₂AsO₃⁻ from the neutral molecule of H₃AsO₃ by the applied potential.     

Delamination of organo-modified layered double hydroxides in polyamide 6 by melt processing

Layered double hydroxides (LDH) are a class of readily synthesizable layered crystals that can be used as an alternative to the commonly used silicate crystals for the preparation of polymeric nanocomposites. In this work layered double hydroxide/polyamide 6 nanocomposites (LDH/PA6) were prepared from organo-modified LDH by melt processing. The anionic exchange capacity of LDH was varied in order to investigate its influence on the degree of exfoliation. LDH were dispersed by a twin screw micro-extruder at a variety of processing conditions. The nanocomposites were characterized by wide-angle X-ray diffraction (WAXD), small-angle X-ray scattering (SAXS), transmission electron microscopy, dynamic scanning calorimetry, and thermogravimetric analysis. It was found that exfoliated nanocomposites were successfully prepared by melt processing with a low exchange capacity LDH, whereas residue tactoids were observed with a high exchange capacity LDH. Shear, together with the exchange capacity, seems to be the key factor for the delamination in LDH/PA6. No major change in the crystalline phase or in the rate of crystallization was observed in the nanocomposite as compared to the neat polymer. A reduction in the onset of thermal decomposition temperature was observed in PA6/LDH compared to neat PA6, likely due to a nucleophilic attack mechanism. The properties of this nanocomposite system are discussed with connections to the current understanding within the broader nanocomposite field.     

Colour features and pigment composition of Italian carbonic macerated red wines

Thirty commercially available Italian carbonic macerated young red wines, have been analysed by HPLC–DAD–MS with the aim to characterise their pigment composition and find possible correlations with the colour features evaluated by means of spectrophotometric measurements. The composition in anthocyanin monoglucosides, acetates, p-coumarates as well as that in pyranoanthocyanins and direct and ethyl-bridged adducts with flavanols, was studied. Because of the peculiar maceration process, carbonic macerated wines demonstrated to be qualitatively rich in pyranoanthocyanins and pigment adducts. A number of ethyl-bridged anthocyanin isomers was found, together with significant contents of vitisin A and vitisin B (up to 15.5 mg/L as a sum). Malvidin-3-glc-4-vinylphenol was the main pyranoanthocyanin-vinylphenol adduct (up to 1.10 mg/L). The colour features of the wines were broadly distributed as a consequence of the percentage of carbonic macerated wine present in the marketed product. The statistical treatment of the entire data set revealed that pyranoanthocyanins are positively correlated with colour density (while no correlation was found for monoglucosides) and that direct adducts and/or ethyl-bridged compounds can play a role for what concerns the hue of carbonic macerated wines.     

汽车功率密度推动封装技术创新

随着市场对大功率应用的需求增长，功率电子产品封装技术的发展呈现出新的发展趋势，而汽车市场正是这一趋势的强大推动力量。 汽车内部各种功能不断地电气化（electrification），比如电动助力转向系统（Electric Power Steering）、起动机和发电机、空调、水泵乃至牵引电机驱动等     

Effect of phosphate binders on oxidative stress and inflammation markers in hemodialysis patients

It has been suggested that phosphate binders may reduce the inflammatory state of hemodialysis (HD) patients. However, it is not clear whether it has any effect on oxidative stress. The objective of this study was to evaluate the effect of sevelamer hydrochloride (SH) and calcium acetate (CA) on oxidative stress and inflammation markers in HD patients. Hemodialysis patients were randomly assigned to therapy with SH (n=17) or CA (n=14) for 1 year. Before the initiation of therapy (baseline) and at 12 months, we measured in vitro reactive oxygen species (ROS) production by stimulated and unstimulated polymorphonuclear neutrophils and serum levels of tumor necrosis factor α, interleukin-10, C-reactive protein, and albumin. There was a significant reduction of spontaneous ROS production in both groups after 12 months of therapy. There was a significant decrease of Staphylococcus aureus stimulated ROS production in the SH group. There was a significant increase in albumin serum levels only in the SH group. In the SH group, there was also a decrease in the serum levels of tumor necrosis factor α and C-reactive protein. Our results suggest that compared with CA treatment, SH may lead to a reduction in oxidative stress and inflammation. Therefore, it is possible that phosphate binders exert pleiotropic effects on oxidative stress and inflammation, which could contribute toward decreasing endothelial injury in patients in HD.     

High-Frequency Induction Hardening with Controlled Capacitors-Discharge Pulse-Operation Processes

Induction hardening processes with power pulses obtained by means of capacitors-discharge high-frequency generators are discussed. The process is characterized by high-power densities and heating times on the order of some tens or hundreds of milliseconds together with cooling rates obtained by self-quenching without the use of auxiliary means. The possibility of obtaining the most favorable transient temperature distribution in the workpieces by controlling the shape of the pulses and therefore the variable time rate energy supply is examined. The influence of shape of pulses and discharge circuit's electrical parameters on the heating and cooling transients has been analyzed by a thermal model which allows prediction of the depths of hardening. Measurements from hardening tests carried out on steel samples varying the pulse shapes are given in support of the calculation results.     

A simplified broadband coupling approach applied to chemically robust sol-gel, planar integrated optical waveguides

A new generation waveguide spectrometer with broadband coupling capabilities has been developed. As opposed to previous devices, this attenuated total reflection (ATR) spectrometer is much simpler in design, is more chemically robust, and transmits light down to at least 400 nm. The attenuated total reflection element consists of a single-mode, planar integrated optical waveguide fabricated by dip-coating a approximately 300 nm thick, sol-gel composite layer on a glass substrate. A commercially available prism is used as the incoupler with an integral holographic diffraction grating acting as the dispersive outcoupling element. The transmission of narrow band-pass filters was used to compare the response of the waveguide spectrometer to that of a conventional transmission instrument. Spectral resolution was assessed by measuring the fwhm of various laser lines, which were found to range from 0.5 to 1.3 nm. The measured limits of detection for the waveguide spectrometer from 400 to 600 nm are 8.0 and 10.1 milliabsorbance units for TE and TM polarizations, respectively. Finally, to demonstrate the application of this technology to a molecular film confined to a solid-liquid interface, visible ATR spectra of an adsorbed submonolayer of horse heart cytochrome c were acquired. A procedure to correct the waveguide spectra for the wavelength dependence in ATR path length is described.     

Silicone microlenses and interference gratings

Interference gratings, plano-convex microlenses, and spherical microlenses have been made in silicone. Lenses were fabricated by the melting method. Two substrates have been tried: glass and Teflon. The latter substrate lets us fabricate low-f-number lenses. We made spherical microlenses by placing pieces of silicone near a thermal source and studied resolution of the lenses by investigating the images they gave of a test chart. We made low-spatial-frequency gratings by recording interference patterns and studied parameters involved in the recording. A study of the profile of the gratings and lenses was done with a mechanical surface analyzer.     

A UML profile for multidimensional modeling in data warehouses

The multidimensional (MD) modeling, which is the foundation of data warehouses (DWs), MD databases, and On-Line Analytical Processing (OLAP) applications, is based on several properties different from those in traditional database modeling. In the past few years, there have been some proposals, providing their own formal and graphical notations, for representing the main MD properties at the conceptual level. However, unfortunately none of them has been accepted as a standard for conceptual MD modeling.

In this paper, we present an extension of the Unified Modeling Language (UML) using a UML profile. This profile is defined by a set of stereotypes, constraints and tagged values to elegantly represent main MD properties at the conceptual level. We make use of the Object Constraint Language (OCL) to specify the constraints attached to the defined stereotypes, thereby avoiding an arbitrary use of these stereotypes. We have based our proposal in UML for two main reasons: (i) UML is a well known standard modeling language known by most database designers, thereby designers can avoid learning a new notation, and (ii) UML can be easily extended so that it can be tailored for a specific domain with concrete peculiarities such as the multidimensional modeling for data warehouses. Moreover, our proposal is Model Driven Architecture (MDA) compliant and we use the Query View Transformation (QVT) approach for an automatic generation of the implementation in a target platform. Throughout the paper, we will describe how to easily accomplish the MD modeling of DWs at the conceptual level. Finally, we show how to use our extension in Rational Rose for MD modeling.