Design and analysis of a self-tuning feedback controller for the Internet

Active queue management (AQM) is an effective method used in Internet routers for congestion avoidance, and to achieve a tradeoff between link utilization and delay. The de facto standard, the random early detection (RED) AQM scheme, and most of its variants use average queue length as a congestion indicator to trigger packet dropping. This paper proposes a novel packet dropping scheme, called self-tuning proportional and integral RED (SPI-RED), as an extension of RED. SPI-RED is based on a self-tuning proportional and Integral feedback controller, which considers not only the average queue length at the current time point, but also the past queue lengths during a round-trip time to smooth the impact caused by short-lived traffic dynamics. Furthermore, we give theoretical analysis of the system stability and give guidelines for selection of feedback gains for the TCP/RED system to stabilize the average queue length at a desirable level. The proposed method can also be applied to the other variants of RED. Extensive simulations have been conducted with ns2. The simulation results have demonstrated that the proposed SPI-RED algorithm outperforms the existing AQM schemes in terms of drop probability and stability.     

Auto-generation of IEC standard PLC code using t-MPSG

The objective of this paper is to reduce the development time of a PLC (Programmable Logic Controller) by automating the task of code generation. For this purpose, we applied t-MPSG (Timed-Message Based Part State Graph). The t-MPSG is an extended finite state automata used to model and generate an execution module for a real-time shop floor controller system. In our proposed method, t-MPSG is used to model the formal specification of the controller system that can be translated into textual structure. After the verification of the t-MPSG model, it can be used as an input to the plc-builder tool. The plc-builder tool is an extended version of a conventional MPSG simulator. It can be used to translate the textual structure of the t-MPSG into an IEC standard PLC code. Finally, the generated code can be downloaded to a PLC emulator or a PLC device for the purpose of simulation and execution. The similarity in the hierarchical structure of the t-MPSG and the IEC standard PLC program has made it convenient to transform from one form to another. Furthermore, an illustration of the methodology to auto-generate IEC standard PLC code using t-MPSG is explained with a suitable example. Recommended by Editorial Board member Young Soo Suh under the direction of Editor Jae Weon Choi. This work was partially supported by Defense Acquisition Program Administration and Agency for Defense Development under the contract (UD080042AD). Devinder Thapa is a Postdoc Research Fellow in the Department of Industrial & information systems at Ajou University, Korea. He completed his Ph.D. from Ajou University in Industrial and Information Systems Engineering. His area of research is related to manufacturing automation and intelligent decision support systems. Chang Mok Park is a Professor in the Department of Technology & Systems Management at Induk Institute of Technology. He completed his Ph.D. in 2002 from Ajou University in Industrial Engineering. His research interest is related to manufacturing optimization, discrete event system simulation and signal analysis. Sang C. Park is an Associate Professor in the Department of Industrial & Information Systems Engineering at Ajou University. He received his B.S., M.S., and Ph.D. degrees from KAIST in 1994, 1996, and 2000, respectively, all in Industrial Engineering. His research interests include geometric algorithms in CAD/CAM, process planning, engineering knowledge management, and discrete event system simulation. Gi-Nam Wang is the Head and a Professor in the Department of Industrial & Information Systems Engineering at Ajou University, Korea. He completed his Ph.D. in 1992 from Texas A&M University, in Industrial Engineering. He has worked as Visiting Professor at University of Texas at Austin during 2000–2001. His area of research is related to Intelligent Information & manufacturing systems, system integration & automation, e-Business solutions and image processing.     

Reducing control points in lofted B-spline surface interpolation using common knot vector determination

A new algorithm for reducing control points in lofted surface interpolation to rows of data points is presented in this paper. The key step of surface lofting is to obtain a set of compatible B-spline curves interpolating each row. Given a set of points and their parameterization, a necessary and sufficient condition is proposed to determine the existence of interpolating B-spline curves defined on a given knot vector. Based on this condition, we first properly construct a common knot vector that guarantees the existence of interpolating B-spline curves to each row of points. Then we calculate a set of interpolating B-spline curves defined on the common knot vector by energy minimization. Using this method, fewer control points are employed while maintaining a visually pleasing shape of the lofted surface. Several experimental results demonstrate the usability and quality of the proposed method.     

Pitchfork bifurcation and flip-flop operation with a coupled nonlinear system

A ring cavity system consisting of two hybrid Michelson interferometers coupled together with feedback is constructed. This system shows spatial bifurcation and can be utilized as an all-optical flip-flop device. We demonstrate experimentally a flip-flop operation by use of only a positive pulse in this system.     

Metal microparticle – Polymer composites as printable,bio/ecoresorbable conductive inks

Biologically and environmentally resorbable electronic devices support application possibilities that cannot be addressed with conventional technologies. This paper presents highly conductive, water-soluble composites that can be printed to form contacts, interconnects, antennas, and other important features that are essential to nearly all systems of this type. An optimized material formulation involves in situ polymerization to yield a polyanhydride containing a dispersion of molybdenum microparticles at appropriate concentrations. Comparisons of essential physical and electrical properties of these materials to those of composites formed with other polymers and other metal microparticles reveal the relevant considerations. Various functional demonstrations of screen-printed test structures and devices illustrate the suitability of these conductive inks for use in water-soluble electronic devices. A key advantage of the material introduced here compared to alternatives is its ability to maintain conductance over significant periods of time while immersed in relevant aqueous solutions. Studies involving live animal models establish the biocompatibility.     

Topological derivative-based technique for imaging thin inhomogeneities with few incident directions

Many non-iterative imaging algorithms require a large number of incident directions. Topological derivative-based imaging techniques can alleviate this problem, but lacks a theoretical background and a definite means of selecting the optimal incident directions. In this paper, we rigorously analyse the mathematical structure of a topological derivative imaging function, confirm why a small number of incident directions is sufficient, and explore the optimal configuration of these directions. To this end, we represent the topological derivative-based imaging function as an infinite series of Bessel functions of integer order of the first kind. Our analysis is supported by the results of numerical simulations.     

Localization of atrial natriuretic peptide receptors in the rat tongue and hard palate

The effect of a naturally occurring plant phenolic constituent (the acylphloroglucinol derivative, jensenone, derived from Eucalyptus jensenii) on the food intake of two folivorous marsupials, the common ringtail (Pseudocheirus peregrinus) and the common brushtail possum (Trichosurus vulpecula) was studied. When fed diets containing varying concentrations of jensenone, both species regulated their intake of jensenone so as not to exceed a ceiling intake. This ceiling was about twice as high for common ringtails as for common brushtails from northern Australia. Southern populations of common ringtails showed greatly reduced capacities to tolerate jensenone. When common brushtails were injected (0.5 mg.kg-0.75 body mass) with ondansetron (a selective antagonist of serotonin 5HT3 receptors), they ate significantly more jensenone than animals injected with physiological saline. The same pattern was observed when common ringtails were fed diets containing both jensenone and ondansetron (0.0035 mg.g-1 wet mass of diet). Ondansetron injection had no effect on food intake when the food did not contain jensenone while the addition of higher doses of ondansetron to diets of common ringtails very slightly reduced food intakes of a non-jensenone diet. When common brushtails were given 50 mg of jensenone by gastric lavage, their average subsequent intake of dietary jensenone matched the difference between the daily threshold and the dose given, although the response of individuals was highly variable. Lavage with water alone had no effect on subsequent jensenone intake compared with the pre-dose period. We interpret these results as evidence that the antifeedant effects of jensenone and related compounds are partly mediated by serotonin action on 5HT3 receptors most likely via "nausea" to condition a food aversion.