Synthesis of high surface area nanocrystalline MgO by pluronic P123 triblock copolymer surfactant

Nanocrystalline magnesium oxide with high surface area was prepared by a simple precipitation method using pluronic P123 triblock copolymer (Poly(ethylene glycol)-block, Poly(propylene glycol)-block, Poly(ethylene glycol)) as surfactant. The prepared samples were characterized by X-ray Diffraction (XRD), N₂ adsorption (BET), Fourier transform infrared spectroscopy (FTIR), Thermal, differential thermal gravimetric and differential thermal analyses (TG/DTG/DTA) and Scanning electron microscopy (SEM). The obtained results revealed that the addition of surfactant is effective to prepare magnesium oxide with high surface area and affects the morphology of the prepared samples. The results showed that the magnesium oxide calcined at different temperatures ranging from 600 to 800 °C possessed a high surface area in the range of 133.9–78.1 m² g^?1. In addition, the magnesium oxide prepared with the addition of surfactant showed a narrower pore size distribution compared to the sample prepared without the addition of a surfactant.     

Delignification of intact biomass and cellulosic coproduct of acid‐catalyzed hydrolysis

The kinetics of acid‐catalyzed hemicellulose removal and also alkaline delignification of oat hull biomass were investigated. All three operational parameters namely, catalyst concentration (0.10–0.55 N H₂SO₄), temperature (110–130°C), and residence time (up to 150 min) affected the efficiency of hemicellulose removal, with 100% of hemicellulose removed by appropriate selection of process parameters. Analysis of delignification kinetics (in the temperature range of 30–100°C) indicated that it can be expressed very well by a two‐phase model for the crude biomass and also for the hemicellulose‐prehydrolyzed material. The application of acid‐catalyzed prehydrolysis improved the capacity of lignin dissolution especially at lower temperatures (30 and 65°C) and accelerated the dissolution of lignin. This acceleration of delignification by prehydrolysis was possible at all levels of temperature in the bulk phase; however, results were more significant at the lower temperatures in the terminal phase. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1783–1791, 2015     

Synthesis of a Series of PEG-Based ABA Triblock Copolymers and Their Influence on Rheology of Cement Slurries

A series of water-soluble ABA triblock copolymers consisting of a polyethylene glycol central block joined to two blocks of six different homopolymers have been synthesized via simple solvent-free and ecofriendly routes and characterized by FTIR and ¹HNMR spectroscopy. Dispersing and slump-retaining abilities of the copolymers in cement slurries were evaluated by mini-slump spread method. Rheological measurements of samples with the best performance were carried out using a rate-controlled coaxial cylinder viscometer. The test results indicate that the dispersing power of the copolymers in cement pastes is strongly affected by the structure and degree of polymerization of the monomers.     

Ghezeljeh nanoclay as a new natural adsorbent for the removal of copper and mercury ions:Equilibrium,kinetics and thermodynamics studies

Heavy metal determination was carried out by applying the solid phase extraction (SPE) method in batch mode followed by atomic absorption spectroscopy (AAS) and inductively coupled plasma atomic emission spectrosco-py (ICP-AES) from aqueous solutions using Ghezeljeh montmoril onite nanoclay as a new natural adsorbent. The Ghezeljeh clay is characterized by using Fourier Transform Infrared (FT-IR) Spectroscopy, Scanning Electron Mi-croscopy–Energy Dispersive Spectrometry (SEM–EDS) and X-ray Diffractometry (XRD) and X-ray Fluorescence (XRF). The results of XRD and FT-IR of nanoclay confirm that montmoril onite is the dominant mineral phase. Based on SEM images of Ghezeljeh clay, it can be seen that the distance between the plates is Nano. The effects of varying parameters such as initial concentration of metal ions, pH and type of buffer solutions, amount of ad-sorbent, contact time, and temperature on the adsorption process were examined. The effect of various interfer-ing ions was studied. The adsorption data correlated with Freundlich, Langmuir, Dubinin–Radushkevich (D–R), and Temkin isotherms. The Langmuir and Freundlich isotherms showed the best fit to the equilibrium data for Hg(I ), but the equilibrium nature of Cu(II) adsorption has been described by the Langmuir isotherm. The kinetic data were described with pseudo-first-order, pseudo-second-order and double-exponential models. The adsorp-tion process follows a pseudo-second-order reaction scheme. Calculation ofΔG0,ΔH0 andΔS0 showed that the nature of Hg(II) ion sorption onto the Ghezeljeh nanoclay was endothermic and was favored at higher temper-ature, and the nature of Cu(II) ion sorption was exothermic and was favored at lower temperature.     

Thin-film nanofiltration membrane with monomers of 1,2,4,5-benzene tetracarbonyl chloride and ethylene diamine on electrospun support: preparation,morphology and chlorine resistance properties

Polymer Bulletin - Novel polyimide nanofiltration membranes were prepared by interfacial polymerization using 1,2,4,5-benzene tetracarbonyl chloride (BTC) and trimesoyl chloride solution in...     

Synthesis of biocompatible and degradable microspheres based on 2‐hydroxyethyl methacrylate via microfluidic method

Monodisperse poly(2‐hydroxyethyl methacrylate), p‐HEMA, microspheres in size ranging from 16 to 340 (μm) were synthesized by in situ emulsion photopolymerization of HEMA monomer with polyethylene glycol diacrylate (p‐EGDA) by means of a three‐dimensional microfluidic flow‐focusing device. An aqueous solution of HEMA, p‐EGDA as chain extender and UV‐photoinitiator serving as dispersed phase formed microdroplets in a continuous oil phase mainly consisting of n‐heptane. A downward coaxial orifices design in the device led to confinement of the reaction admixtures thread to central axis of the microchannels. This design strategy could solve the wetting problem of dispersed phase with the microchannels leading to a successful production of monodisperse microspheres with size variation of less than 4%. The effects of concentration of p‐EGDA, surfactant, and flow rate ratios on microsphere size were examined. It was observed that increasing the concentration of p‐EGDA slightly increases the size whereas increasing the flow rate ratios of continuous to dispersed phase effectively decreases the size of microspheres. The rapid continuous synthesis of p‐HEMA based microspheres via the microfluidic route with reliable control over size, size distribution, and composition opens new doors for mass production of biocompatible and degradable polymeric microspheres for enormous biotechnological applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40925.     

Influence of Ni/Co binders and Mo2C on the microstructure evolution and mechanical properties of (Ti0.93W0.07)C–based cermets

In this research, solid–solution powder of (Ti_0.93W_0.07)C was synthesized by high–energy ball mill method followed by carbothermal reduction process. Subsequently, the acquired powder was blended with Ni/Co and Mo₂C secondary carbide, and sintered under the optimized temperature (1510?°C) for 1?h to produce the modulated cermets. A typical core–rim structure formation with solid–solution phases was confirmed by backscattered electrons studies using a Field Emission electron scanning microscope. The hardness of the synthesized cermets was enhanced by increasing the specific amount of Mo₂C. The acquired results demonstrate that the binder type has a prominent influence on the microstructure and hardness of the prepared cermets. The hardness of (Ti_0.93W_0.07)C–xMo₂C–Ni cermet increased ~ 9%, when nickel was partially substituted by cobalt.     

Synthesis,Characterization, and Bioactivity Evaluation of Amorphous and Crystallized 58S Bioglass Nanopowders

The aim of this work was synthesis and characterization of amorphous and crystallized 58S nanopowders produced via sol‐gel method. According to the thermal analysis, the nanopowders were heat‐treated at 600°C and 1100°C. X‐ray diffraction results revealed that the phases of Wollastonite and tricalcium phosphate were formed at 1100°C. The in vitro tests showed that hydroxyl carbonate apatite was precipitated on both crystallized and amorphous nanopowders, while amorphous nanopowder showed a higher bioactivity than that of crystallized nanopowder. In contrast, mechanical properties of crystallized specimen were higher than those of amorphous specimen.