Energy and load balancing routing protocol for IoT

Due to the limitation of node energy resources, the management of energy consumption is one of the most important problems of the internet of things (IoT). Therefore, many studies have tried to optimize and manage energy consumption by focusing on different techniques. Although each of these studies has improved and optimized energy consumption, there are many important problems, including maintaining traffic balance and energy consumption of network nodes. Therefore, a new method is necessary to maintain the load and energy balancing of network nodes. Therefore, this paper introduces energy and load balancing routing protocol for IoT (ELBRP) based on the development of the RPL routing protocol and the efficiency of data distribution technique. The ELBRP performance has three steps. In the first step, along with the process of sending DODAG information object (DIO) messages, the status of network nodes is evaluated. In the second step, the DODAG communication graph is formed according to the ELBRP. In the third step, data transmission is done according to the distribution technique with the goal of balancing traffic and energy. The simulation results using cooja simulator showed the superiority of ELBRP in improving energy consumption and successful delivery ratio, reducing delay and increasing the network lifetime compared to the similar methods.     

Agent-based time delay margin in consensus of multi-agent systems by an event-triggered control method: Concept and computation

This paper deals with defining the concept of agent-based time delay margin and computing its value in multi-agent systems controlled by event-triggered based controllers. The agent-based time delay margin specifying the time delay tolerance of each agent for ensuring consensus in event-triggered controlled multi-agent systems can be considered as complementary for the concept of (network) time delay margin, which has been previously introduced in some literature. In this paper, an event-triggered control method for achieving consensus in multi-agent systems with time delay is considered. It is shown that the Zeno behavior is excluded by applying this method. Then, in a multi-agent system controlled by the considered event-triggered method, the concept of agent-based time delay margin in the presence of a fixed network delay is defined. Moreover, an algorithm for computing the value of the time delay margin for each agent is proposed. Numerical simulation results are also provided to verify the obtained theoretical results.     

An Improvement Energy Consumption Policy Using Communication Reduction in Wireless Body Sensor Network

Dedicated short-range communications (DSRC) is an important wireless technology for current and future automotive safety and mitigation of traffic jams. In this work, we have designed a Coplanar waveguide microstrip patch antenna with linear, upper and bottom and side slots for application in DSRC. The patch antenna was designed using glass epoxy substrate (FR4). Various parametric analyses such as the current distribution, reflection coefficient, radiation pattern on E- and H-plane as well as the realized gain (dB) were performed. The results were obtained by simulation using high-frequency structure simulator tool. The proposed antenna covers a frequency band of 5.8–5.9 GHz which is highly dedicated to the DSRC wireless communication technology for enhancement of safety of the automotive transport system. The designed antenna shows a good return loss of ??19 dB at 5.9 GHz.The designed antenna shows a promising gain, return loss and radiation pattern for use in DSRC for automotive transport systems.

     

Mechanism study of silver nanoparticle production using Neurospora intermedia

Elucidation of the molecular mechanism of silver nanoparticle (AgNP) synthesis is necessary to control nanoparticle size, shape, and monodispersity. In this study, the mechanism of AgNP formation by Neurospora intermedia was investigated. The higher production rate of AgNP formation using a culture supernatant heat‐treated at 100° and 121°C relative to that with an un‐treated culture supernatant indicated that the native form of the molecular species is not essential. The effect of the protein molecular weight (MW) on the nanoparticle size distribution and average size was studied by means of ultraviolet–visible spectroscopy and dynamic light scattering. Using un‐treated and concentrated cell‐free filtrate passed through 10 and 20 kDa cut‐off filters led to the production of AgNPs with average sizes of 25, 30, and 34 nm, respectively. Also, using the permeate fraction of cell‐free filtrate passed through a 100 kDa cut‐off filter led to the formation of the smallest nanoparticles with the narrowest size distribution (average size of 16 nm and polydispersity index of 0.18). Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis of the fungal extracellular proteins showed two notable bands with the MWs of 15 and 23 kDa that are involved in the reduction and stabilisation of the nanoparticles, respectively.Inspec keywords: silver, nanoparticles, nanofabrication, proteins, molecular weight, ultraviolet spectra, visible spectra, cellular biophysics, electrophoresis, molecular biophysicsOther keywords: Neurospora intermedia, molecular mechanism, silver nanoparticle synthesis, nanoparticle shape, nanoparticle monodispersity, AgNP formation, untreated culture supernatant, molecular species, protein molecular weight, MW, nanoparticle size distribution, ultraviolet‐visible spectroscopy, dynamic light scattering, untreated cell‐free filtrate, concentrated cell‐free filtrate, cut‐off filters, permeate fraction, polydispersity index, Sodium dodecyl sulphate polyacrylamide gel electrophoresis analysis, fungal extracellular proteins, nanoparticle reduction, nanoparticle stabilisation, temperature 100 degC, temperature 121 degC, size 25 nm, size 30 nm, size 34 nm, size 16 nm, Ag     

Improved electrochemical performance of nitrocarburised stainless steel by hydrogenated amorphous carbon thin films for bone tissue engineering

In this study, hydrogenated amorphous carbon thin films, structurally similar to diamond‐like carbon (DLC), were deposited on the surface of untreated and plasma nitrocarburised (Nitrocarburizing‐treated) stainless steel medical implants using a plasma‐enhanced chemical vapour deposition method. The deposited DLC thin films on the nitrocarburising‐treated implants (CN+DLC) exhibited an appropriate adhesion to the substrates. The results clearly indicated that the applied DLC thin films showed excellent pitting and corrosion resistance with no considerable damage on the surface in comparison with the other samples. The CN+DLC thin films could be considered as an efficient approach for improving the biocompatibility and chemical inertness of metallic implants.Inspec keywords: tissue engineering, bone, biomedical materials, electrochemistry, amorphous state, carbon, hydrogen, thin films, plasma CVD, adhesion, corrosion resistance, surface hardeningOther keywords: electrochemical performance, plasma nitrocarburised stainless steel medical implants, hydrogenated amorphous carbon thin films, bone tissue engineering, plasma‐enhanced chemical vapour deposition method, adhesion, corrosion resistance, biocompatibility, chemical inertness, metallic implants, C:H     

Instance of hidden instability traps in intermittent transition of moving masses along a flexible beam

The problem of an elastic beam under the periodic loading of successive moving masses is investigated as a pragmatic case for studying dynamic stability of linear time-varying systems. This model serves to highlight the odds of multi-solutions coexistence, a form of hidden instability which reveals dangerous as it may be precipitated by the slightest disturbance or variation in the model. Since no engineering model perfectly represents a physical system, such situations for which Floquet theory naively predicts stability are potentially inevitable. The harmonic balancing method is used in order to thoroughly explore the stability diagrams for detecting these instability gaps. Although this phenomenon has also been described in other physical systems, it has not been addressed for beam–moving mass systems. This result may find particular importance in applications involving self-induced vibrations of elastic structures and hence also appears of practical relevance.     

Adaptive neuro-fuzzy inference system multi-objective optimization using the genetic algorithm/singular value decomposition method for modelling the discharge coefficient in rectangular sharp-crested side weirs

In the present article, the adaptive neuro-fuzzy inference system (ANFIS) is employed to model the discharge coefficient in rectangular sharp-crested side weirs. The genetic algorithm (GA) is used for the optimum selection of membership functions, while the singular value decomposition (SVD) method helps in computing the linear parameters of the ANFIS results section (GA/SVD-ANFIS). The effect of each dimensionless parameter on discharge coefficient prediction is examined in five different models to conduct sensitivity analysis by applying the above-mentioned dimensionless parameters. Two different sets of experimental data are utilized to examine the models and obtain the best model. The study results indicate that the model designed through GA/SVD-ANFIS predicts the discharge coefficient with a good level of accuracy (mean absolute percentage error?=?3.362 and root mean square error?=?0.027). Moreover, comparing this method with existing equations and the multi-layer perceptron–artificial neural network (MLP-ANN) indicates that the GA/SVD-ANFIS method has superior performance in simulating the discharge coefficient of side weirs.     

Biosynthesis of SeNPs by Mycobacterium bovis and their enhancing effect on the immune response against HBs antigens: an in vivo study

Conventional hepatitis B vaccine contains alum but is less effective to induce Th1 response. Selenium nanoparticles and Bacillus Calmette–Guerin were reported as immune modulators. In this study, SeNPs were extracted from Mycobacterium bovis and characterised. SeNPs were mixed with HBs‐Ag and administered to the mice to investigate he immune response pattern. With an addition of Se ions at a sub‐inhibitory concentration to the Sauton medium broth after 24 h, SeNPs were extracted from M. bovis and characterised by Fourier transform infrared spectroscopy, dynamic light scattering, atomic forcemicroscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, and thermogravimetric analysis. Furthermore, female inbred BALB/c mice were injected subcutaneously on the first, 14th, 28th day with 100 and 200 µg doses of that SeNPs supplemented with HBs‐Ag vaccine. Later, the total antibody, isotypes of Immunoglobulin G1, Interlukin 4, and interferon‐γ were measured by enzye‐linked immunosorbent assay. The size of the SeNPs was <150 nm. Level of total antibody and immunoglobulin G2a increased significantly in the group that received 200 µg/ml nano selenium extracted from M. bovis. SeNPs in dose of 200 µg coated with organic materials of M. bovis could induce an influential immune response in relation to the conventional HBs‐Ag vaccine.Inspec keywords: selenium, nanoparticles, nanofabrication, microorganisms, Fourier transform spectra, infrared spectra, light scattering, atomic force microscopy, X‐ray chemical analysis, transmission electron microscopy, thermal analysis, nanomedicineOther keywords: biosynthesis, selenium nanoparticles, Mycobacterium bovis, enhnced immune response, HBs antigens, Bacillus Calmette‐Guerin, immune modulators, biogenic SeNPs, immune response pattern, Sauton medium broth, Fourier transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, thermogravimetric analysis, female inbred BALB/c mice, antibody, IgG1 isotype, IgG2a isotype, IL₄ isotype, interferon‐γ, enzyme‐linked immunosorbent assay, bacterium, time 24 h, time 14 day, time 28 day, Se     

Green synthesis of silver nanoparticles using Glaucium corniculatum (L.) Curtis extract and evaluation of its antibacterial activity

The metal nanoparticles, due to interesting features such as electrical, optical, chemical and magnetic properties, have been investigated repeatedly. Also, the mentioned nanoparticles have specific uses in terms of their antibacterial activity. The biosynthesis method is more appropriate than the chemical method for producing the nanoparticles because it does not need any special facilities; it is also economically affordable. In the current study, the silver nanoparticles (AgNPs) were obtained by using a very simple and low‐cost method via Glaucium corniculatum (L.) Curtis plant extract. The characteristics of the AgNPs were investigated using techniques including: X‐ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy. The SEM and TEM images showed that the nanoparticles had a spherical shape, and the mean diameter of them was 53.7 and 45 nm, respectively. The results of the disc diffusion test used for measuring the anti‐bacterial activity of the synthesised nanoparticles indicated that the formed nanoparticles possessed a suitable anti‐bacterial activity.Inspec keywords: silver, nanoparticles, antibacterial activity, nanomedicine, nanofabrication, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectraOther keywords: green synthesis, silver nanoparticles, Glaucium corniculatum Curtis extract, antibacterial activity, metal nanoparticles, biosynthesis method, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, SEM, TEM, spherical shape, disc diffusion test, Ag     

Electrical and Mechanical Behavior of Aerosol Jet–Printed Gold on Alumina Substrate for High-Temperature Applications

There is a growing interest in the development of microelectronics that can perform reliably and robustly at temperatures above 300 °C. Such devices require stable thermal properties, low thermal drift, and thermal cycling resistance. Conventional hybrid circuit technology demonstrates high-temperature packages, but the high costs and lead time are significant drawbacks. In contrast, additive manufacturing processes, including aerosol jet printing (AJP), offer cost and time benefits, as well as 3D structures and embedded features. However, the properties and reliability of additive packaging materials at extreme temperatures are not well known. Herein, the reliability at temperatures up to 750 °C in terms of electrical performance and mechanical strength of aerosol jet printed gold thick films onto ceramic substrates are assessed. Thermal coefficient of resistance of printed gold films is measured. The electrical resistance stability and leakage current of printed gold structures are also characterized during over 100 h of aging at temperatures up to 750 °C. Finally, the mechanical adhesion strength of the printed gold films is evaluated after aging for 100 h at temperatures up to 750 °C. The adhesion of the printed gold to the ceramic substrates remains high after aging, very stable resistances and minimal leakage currents have been observed.