An economic and sensitive method for extracting chromium speciation in airborne inhalable dust,using a green sample treatment coupled with electrothermal atomic absorption

ABSTRACT

A new approach of cloud point extraction CPE procedure is optimized for hexavalent chromium determination in airborne dusts. Triton X-114 is used as a surfactant and 1-(2-pyridylazo)-2-naphthol as a specific complexing agent for the trivalent chromium’s removal from the aqueous phase to isolate hexavalent chromium compounds. The parameters influencing the extraction protocol (pH, surfactant concentration, and temperature are optimized. The obtained detection and quantification limits are 0.1 and 0.4 μg/L, respectively. The linearity is verified, with a regression coefficient close to 0.999 and the extraction recovery exceeds 99%. The method was successfully applied to analyze airborne samples collected from workplaces.     

Sensor Fault Diagnosis and Unknown Disturbances Estimation of High Switching Frequency Single-phase PWM Rectifier

International Journal of Control, Automation and Systems - The fault and disturbances estimation has an important role in the modern traction railway system. This paper proposes a unique method for...     

Evolutionary forwarding games in delay tolerant networks: Equilibria,mechanism design and stochastic approximation

In this paper, we apply evolutionary games to non-cooperative forwarding control in Delay Tolerant Networks (DTNs). The main focus is on mechanisms to rule the participation of the relays to the delivery of messages in DTNs. Thus, we express the success probability as a function of the competition that takes place within a large population of mobiles, and we characterize the effect of reward-based mechanisms on the performance of such systems. Devices acting as active relays, in fact, sacrifice part of their batteries in order to support message replication and thus increase the probability to reach the destination. In our scheme, a relay can choose the strategy by which they participate to the message relaying. A mobile that participates receives a unit of reward based on the reward mechanism selected by the network. A utility function is introduced as the difference between the expected reward and the energy cost, i.e., the cost spent by the relay to sustain forwarding operations. We show how the evolution dynamics and the equilibrium behavior (called Evolutionary Stable Strategy – ESS) are influenced by the characteristics of inter contact time, energy expenditure and pricing characteristics.We extend our analysis to mechanisms that the system can introduce in order to have the message delivered to the destination with high probability within a given deadline and under energy constraints which bound the number of released copies per message. Finally, we apply our findings in order to devise decentralized forwarding algorithms that are rooted in the theory of stochastic approximations. Thus, we demonstrate that the ESS can be attained without complete knowledge of the system state and letting the source monitor number of released copies per message only. We provide extensive numerical results to validate the proposed scheme.     

Toward an efficient and scalable feature selection approach for internet traffic classification

There is significant interest in the network management and industrial security community about the need to identify the “best” and most relevant features for network traffic in order to properly characterize user behaviour and predict future traffic. The ability to eliminate redundant features is an important Machine Learning (ML) task because it helps to identify the best features in order to improve the classification accuracy as well as to reduce the computational complexity related to the construction of the classifier. In practice, feature selection (FS) techniques can be used as a preprocessing step to eliminate irrelevant features and as a knowledge discovery tool to reveal the “best” features in many soft computing applications. In this paper, we investigate the advantages and disadvantages of such FS techniques with new proposed metrics (namely goodness, stability and similarity). We continue our efforts toward developing an integrated FS technique that is built on the key strengths of existing FS techniques. A novel way is proposed to identify efficiently and accurately the “best” features by first combining the results of some well-known FS techniques to find consistent features, and then use the proposed concept of support to select a smallest set of features and cover data optimality. The empirical study over ten high-dimensional network traffic data sets demonstrates significant gain in accuracy and improved run-time performance of a classifier compared to individual results produced by some well-known FS techniques.     

Indium selenide microrod films: chemical bath deposition from acidic bath

Films of indium selenide was deposited onto glass and indium tin oxide coated glass substrates in acidic medium using chemical bath deposition at room temperature. Indium sulphate and sodium selenosulphate were used as precursors of In³⁺ and Se^2?, respectively. The structural, surface morphological and optical properties of the deposited films were studied. Diffractograms in structural study revealed the deposited material is In₂Se₃ films. Controlled bath conditions resulted in the evolution of the In₂Se₃ microrod-like morphology. The optical band gap of the film was found to be 1.7 eV.     

Optoelectronic Recoded and Nonrecoded Trinary Signed-Digit Adder that uses Optical Correlation

A symbolic-substitution-based optical numeric processor that uses recoded and nonrecoded trinary signed-digit (TSD) number representations is proposed. Also, we propose new joint spatial encodings for the TSD numbers that reduce the symbolic-substitution computation rules involved in the processor. Optoelectronic implementation of the proposed recoded adder is feasible. Also, the nonrecoded TSD addition can be performed optically in two steps. Both the proposed recoded and nonrecoded adders are more compact than a recently reported modified signed-digit counterpart and use fewer correlators and spatial light modulators.     

Integrating customer's preferences in the QFD planning process using a combined benchmarking and imprecise goal programming model

Quality function deployment (QFD) is a customer-oriented design tool for developing new or improved products to achieve higher customer satisfaction by integrating various functions of an organization. The engineering characteristics (ECs) affecting the product performances are designed to match the customer attributes (CAs). However, from the viewpoint of the QFD team, product design processes are performed in imprecise environments, and more than one factor must be taken into account in determining the target levels of ECs, especially the limited resources and increased market competition. This paper presents an imprecise goal programming (GP) approach to determine the optimum target levels of ECs in QFD for maximizing customer satisfaction under resource limitation and considerations of market competition. Based on benchmarking data of CAs, the concept of satisfaction functions is utilized to formulate explicitly the customer's preferences and to integrate the competitive analysis of target market into the modelling and solution process. In addition, the relationships linking CAs and ECs and the ECs to each other are integrated by functional relationships. The proposed approach will be illustrated through a car door design example.     

Stick-slip motion control based on cutter location data for an orthogonal-type robot

In this article, a new desktop orthogonal-type robot, which has the capacity of stick-slip motion control based on cutter location data, is presented for lapping small metallic molds with a curved surface. The robot consists of three single-axis devices with a high position resolution of 1 μm. A thin wooden stick tool with a ball-end shape is attached to the tip of the z-axis. In order to improve the lapping performance, a novel stick-slip motion control method is developed in the control system. The small stick-slip motion is orthogonally generated in the direction of the tool’s movement. The effectiveness of stick-slip motion control is examined through an actual lapping test of an LED lens cavity.     

Analysis and suppression of spurious modes of the ring shape anchored RF MEMS contour mode disk resonator

One of the most encumbering issues in RF MEMS resonators is spurious modes. The problem of spurious modes becomes more critical, when the ring type resonators are used. In the ring shape anchored contour mode disk resonator, for achieving a low serial resistance, the inner radius of the disk must be increased. This causes the spurious modes to become too close to the desired mode and degrade the operation of the resonator. In this work, spurious modes of before-mentioned device are introduced and their characteristics are evaluated by exact analytical approach. Based on those analytical approaches, we introduce two techniques for spurious mode suppression. The first technique is based on exciting the desired mode by proper electrode engineering and hence is an electrical approach. The second technique is reconfiguring of the anchor from a continuous ring to crossed ring segments and locating the segments on the phase discriminating lines to increase the insertion loss for spurious modes and decrease the losses for the fundamental mode. The final harmonic analysis verifies that the proposed techniques result a resonator with a pure frequency spectrum and spurious modes excluded over a very wide frequency range.