Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W–Cu Composites

Tungsten is of industrial relevance due its outstanding intrinsic properties (e.g., highest melting‐point of all elements) and therefore difficult to 3D‐print by conventional methods. Here, tungsten micro‐lattices are produced by room‐temperature extrusion‐based 3D‐printing of an ink comprising WO₃–0.5%NiO submicron powders, followed by H₂‐reduction and Ni‐activated sintering. The green bodies underwent isotropic linear shrinkage of ≈50% during the thermal treatment resulting in micro‐lattices, with overall 35–60% open‐porosity, consisting of 95–100% dense W–0.5%Ni struts having ≈80–300 μm diameter. Ball‐milling the powders and inks reduced the sintering temperature needed to achieve full densification from 1400 to 1200 °C and enabled the ink to be extruded through finer nozzles (200 μm). Partial sintering of the struts is achieved when NiO is omitted from the ink, with submicron interconnected‐porosity of ≈34%. Several tungsten micro‐lattices are infiltrated with molten copper at 1300 °C under vacuum, resulting in dense, anisotropic W–Cu composites with 40–65% tungsten volume fraction. Partially sintered struts (containing nickel) with submicron open porosity are also infiltrated with Cu, resulting in co‐continuous W–Cu composites with wide W struts/Cu channels at the lattice scale (hundreds of micrometers), and fine W–Cu interpenetrating network at the strut scale (hundreds of nanometers) allowing for the design of anisotropic mechanical and electrical properties.

     

Visual information processing in primate cone pathways. I. A model

At the retinal level, the strategies utilized by biological visual systems allow them to outperform machine vision systems, serving to motivate the design of electronic or "smart" sensors based on similar principles. Design of such sensors in silicon first requires a model of retinal information processing which captures the essential features exhibited by biological retinas. In this paper, a simple retinal model is presented, which qualitatively accounts for the achromatic information processing in the primate cone system. The computer retina model exhibits many of the properties found in biological retinas such as data reduction through nonuniform sampling, adaptation to a large dynamic range of illumination levels, variation of visual acuity with illumination level, and enhancement of spatiotemporal contrast information. The main emphasis of the model presented here is to demonstrate how different adaptation mechanisms play a role in extending the operating range of the primate retina.     

Adaptive predistortion using threshold decomposition‐based piecewise linear modeling

A new adaptive predistortion approach for nonlinear power amplifiers based on the piecewise linear (PWL) approximation of nonlinear functions is presented. The PWL model is obtained using threshold decomposition (TD) of the input‐output characteristics. The TD based PWL model is used to develop a baseband predistorter using both the direct and the indirect learning architectures. The proposed predistorter is proved to provide a better performance in suppressing nonlinear distortion than conventional polynomial predistorters and a reduced hardware complexity as compared to lookup table (LUT) approach. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

Detection and quantification of valve stiction by the method of unknown input estimation

Valve stiction is one of the most common causes of oscillations in industrial process control loops. Such oscillations can degrade the overall performance of the loop and eventually the final product quality. The detection and quantification of valve stiction in industrial process control loops is thus important. From previous studies in the literature, a sticky valve has been shown to have a distinct signature of the stiction phenomena in its valve positioner data. However, the position of the modulating control valves is seldom available. We consider the problem of estimating the valve position as an unknown input estimation problem. In this work, we propose a novel application of the unknown input estimator in order to estimate the valve position given the process model and the data of the process variable and controller output. Using the estimated valve position, we can detect and also quantify the amount of stiction. We demonstrate the efficacy of the method through simulation examples where a sticky valve is deliberately introduced in the closed loop using a two-parameter stiction model available in the literature. Application of the proposed methodology to a laboratory scale flow control loop is presented. An industrial case study is also presented in which the algorithm accurately detects and quantifies stiction in the level control loop of a power plant.     

Aeroelastic tailoring using lamination parameters

The aim of the present work is to passively reduce the induced drag of the rear wing of a Formula One car at high velocity through aeroelastic tailoring. The angle-of-attack of the rear wing is fixed and is determined by the required downforce needed to get around a turn. As a result, at higher velocity, the amount of downforce and related induced drag increases. The maximum speed on a straight part is thus reduced due to the increase in induced drag. A fibre reinforced composite torsion box with extension-shear coupled upper and lower skins is used leading to bending-torsion coupling. Three-dimensional static aeroelastic analysis is performed loosely coupling the Finite Element code Nastran and the Computational Fluid Dynamics panel code VSAERO using ModelCenter. A wing representative of Formula One rear wings is optimised for minimum induced drag using a response surface methodology. Results indicate that a substantial induced drag reduction is achievable while maintaining the desired downforce during low speed turns.     

FPGA implementation and performance evaluation of a high throughput crypto coprocessor

This paper describes the FPGA implementation of FastCrypto, which extends a general-purpose processor with a crypto coprocessor for encrypting/decrypting data. Moreover, it studies the trade-offs between FastCrypto performance and design parameters, including the number of stages per round, the number of parallel Advance Encryption Standard (AES) pipelines, and the size of the queues. Besides, it shows the effect of memory latency on the FastCrypto performance. FastCrypto is implemented with VHDL programming language on Xilinx Virtex V FPGA. A throughput of 222 Gb/s at 444 MHz can be achieved on four parallel AES pipelines. To reduce the power consumption, the frequency of four parallel AES pipelines is reduced to 100 MHz while the other components are running at 400 MHz. In this case, our results show a FastCrypto performance of 61.725 bits per clock cycle (b/cc) when 128-bit single-port L2 cache memory is used. However, increasing the memory bus width to 256-bit or using 128-bit dual-port memory, improves the performance to 112.5 b/cc (45 Gb/s at 400 MHz), which represents 88% of the ideal performance (128 b/cc).     

A new homotopy perturbation method for solving systems of partial differential equations

In this paper, a new homotopy perturbation method (NHPM) is introduced for obtaining solutions of systems of non-linear partial differential equations. Theoretical considerations are discussed. To illustrate the capability and reliability of the method three examples are provided. Comparison of the results of applying NHPM with those of applying HPM reveal the effectiveness and convenience of the new technique.     

Relaxed constraints support vector machines for noisy data

Real-world data collected for computer-based applications are frequently impure. Differentiation of outliers and noisy data from normal ones is a major task in data mining applications. On the other hand, elimination of noisy and outlier data from training samples of a dataset may lead to over-fitting or information loss. A fuzzy support vector machine (FSVM) provides an effective means to deal with this problem. It reduces the effect of the noisy data and outliers by using a fuzzy membership functions. In this paper, a new formation for SVMs is introduced that considers importance degrees for training samples. The constraints of the SVM are converted to fuzzy inequalities. The proposed method, RSVM, shows better efficiency in the classification of data in different domains. Especially, using the proposed RSVM for multi-class classification of arrhythmia disease is presented at the end of this paper as a practical case study to show the effectiveness of the proposed system.     

Consistency of noise covariance estimation in joint input–output closed-loop subspace identification with application in LQG benchmarking

The LQG trade-off curve has been used as a benchmark for control loop performance assessment. The subspace approach to estimating the LQG benchmark has been proposed in the literature which requires certain intermediate matrices in subspace identification as well as the covariance matrix of the noise. It is shown in this paper that many existing closed-loop identification methods do not give a consistent estimate of the noise covariance matrix. As a result, we propose an alternative subspace formulation for the joint input–output closed-loop identification for which the consistency of the required subspace matrices and noise covariance is guaranteed. Simulation studies and experimental results are provided to demonstrate the utility of the proposed method.