Theoretical Investigation of Cubic BaVO<Subscript>3</Subscript> and LaVO<Subscript>3</Subscript> Perovskites via Tran–Blaha-Modified Becke–Johnson Exchange Potential Approach

The full potential linearized augmented plane wave method of density functional theory has been used to investigate the structural, electronic, magnetic and thermoelectric properties of cubic perovskites BaVO₃ and LaVO₃. The ferromagnetic ground state has been found to be stable by comparing the total energies of non-spin-polarized and spin-polarized calculations performed for optimized unit cells. For both compounds, the bond length and tolerance factor are also measured. From the band structures and density of states plots, it is found that both compounds are half-metallic. We found that the presence of V at the octahedral site of these perovskites develops exchange splitting through p-d hybridization, which results in a stable ferromagnetic state. The observed exchange splitting is further clarified from the magnetic moment, charge and spin of the anion and cations. Finally, we also presented the calculated thermoelectric properties of these materials, which show that half-metallic BaVO₃ and LaVO₃ materials are potential contenders for thermoelectric applications.     

Growth and optical properties of In x Ga1−x P nanowires synthesized by selective-area epitaxy

Ternary Ⅲ-Ⅴ nanowires (NWs) cover a wide range of wavelengths in the solar spectrum and would greatly benefit from being synthesized as position-controlled arrays for improved vertical yield,reprodudbility,and tunable optical absorption.Here,we report on successful selective-area epitaxy of metal-particle-free vertical InxGa1-xP NW arrays using metal-organic vapor phase epitaxy and detail their optical properties.A systematic growth study establishes the range of suitable growth parameters to obtain uniform NW growth over a large array.The optical properties of the NWs were characterized by room-temperature cathodoluminescence spectroscopy.Tunability of the emission wavelength from 870 nm to approximately 800 nm was achieved.Transmission electron microscopy and energy dispersive X-ray measurements performed on crosssection samples revealed a pure wurtzite crystal structure with very few stacking faults and a slight composition gradient along the NW growth axis.     

Fuzzy based multi-criteria vertical handover decision modeling in heterogeneous wireless networks

Vertical handover gain significant importance due to the enhancements in mobility models by the Fourth Generation (4G) technologies. However, these enhancements are limited to specific scenarios and hence do not provide support for generic mobility. Similarly, various schemes are proposed based on these mobility models but most of them are suffered from the high packet loss, frequent handovers, too early and late handovers, inappropriate network selection, etc. To address these challenges, a generic vertical handover management scheme for heterogeneous wireless networks is proposed in this article. The proposed scheme works in three phases. In the first phase, a handover triggering approach is designed to identify the appropriate place for initiating handover based on the estimated coverage area of a WLAN access point or cellular base station. In the second phase, fuzzy rule based system is designed to eliminate the inappropriate networks before deciding an optimal network for handover. In the third phase, a network selection scheme is developed based on the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) decision mechanism. Various parameters such as delay, jitter, Bit Error Rate (BER), packet loss, communication cost, response time, and network load are considered for selecting an optimal network. The proposed scheme is tested in a mobility scenario with different speeds of a mobile node ranging from very low to very high. The simulation results are compared with the existing decision models used for network selection and handover triggering approaches. The proposed scheme outperforms these schemes in terms of energy consumption, handover delay and time, packet loss, good put, etc.     

Reinforcement Learning Based Algorithms for Average Cost Markov Decision Processes

This article proposes several two-timescale simulation-based actor-critic algorithms for solution of infinite horizon Markov Decision Processes with finite state-space under the average cost criterion. Two of the algorithms are for the compact (non-discrete) action setting while the rest are for finite-action spaces. On the slower timescale, all the algorithms perform a gradient search over corresponding policy spaces using two different Simultaneous Perturbation Stochastic Approximation (SPSA) gradient estimates. On the faster timescale, the differential cost function corresponding to a given stationary policy is updated and an additional averaging is performed for enhanced performance. A proof of convergence to a locally optimal policy is presented. Next, we discuss a memory efficient implementation that uses a feature-based representation of the state-space and performs TD(0) learning along the faster timescale. The TD(0) algorithm does not follow an on-line sampling of states but is observed to do well on our setting. Numerical experiments on a problem of rate based flow control are presented using the proposed algorithms. We consider here the model of a single bottleneck node in the continuous time queueing framework. We show performance comparisons of our algorithms with the two-timescale actor-critic algorithms of Konda and Borkar (1999) and Bhatnagar and Kumar (2004). Our algorithms exhibit more than an order of magnitude better performance over those of Konda and Borkar (1999).

Analysis of whispering-gallery superconducting dielectric resonator modes

The whispering-gallery (WG) modes of a superconducting dielectric resonator (SDR) based on a sapphire cylindrical dielectric resonator and a YBa₂Cu₃O_{7 –} shielding cylinder have been studied. A method for the determination of the resonant frequencies and the maximum quality factor of such modes is presented. Calculations have shown that most of the mode energy could be confined between the caustic surface of the WG modes provided the dimensions of the SDR are properly selected, and a magnitude of 10⁹ forQ of the SDR could be estimated. A phenomenal explanation is given to account for such outstanding microwave behavior.     

Control of a robotic orthosis for gait rehabilitation

Robot assisted gait training may help in producing rapid improvements in functional gait parameters. This paper presents new experimental results with an intrinsically compliant robotic gait training orthosis. The newly developed robotic orthosis has 6 degrees of freedom (DOFs). A trajectory tracking controller based on the boundary layer augmented sliding control (BASMC) law was implemented to guide the subject’s limbs on physiological gait trajectories. The compliance of the robotic orthosis sagittal plane hip and knee joints was also controlled, independently of the trajectory tracking control. The robotic orthosis and the control scheme were evaluated on three neurologically intact subjects walking on a treadmill. A maximum trajectory tracking error of 10° was recorded at the hip and knee sagittal plane joints. The results showed that subjects can walk in the robotic orthosis with comfort and the BASMC law was able to guide the subject’s limbs on reference physiological trajectories.     

Copper substituted nickel ferrite nanoparticles anchored onto the graphene sheets as electrode materials for supercapacitors fabrication

Nickel ferrites with high theoretical capacitance value as compared to the other metal oxides have been applied as electrode material for energy storage devices i.e. batteries and supercapacitors. High tendency towards aggregation and less specific surface area make the metal oxides poor candidate for electrochemical applications. Therefore, the improvements in the electrochemical properties of nickel ferrites (NiFe₂O₄) are required. Here, we report the synthesis of graphene nano-sheets decorated with spherical copper substituted nickel ferrite nanoparticles for supercapacitors electrode fabrication. The copper substituted and unsubstituted NiFe₂O₄ nanoparticles were prepared via wet chemical co-precipitation route. Reduced graphene oxide (rGO) was prepared via well-known Hummer's method. After structural characterization of both ferrite (Ni_1-xCu_xFe₂O₄) nanoparticles and rGO, the ferrite particles were decorated onto the graphene sheets to obtain Ni_1-xCu_xFe₂O₄@rGO nanocomposites. The confirmation of preparation of these nanocomposites was confirmed by scanning electron microscopy (SEM). The electrochemical measurements of nanoparticles and their nanocomposites (Ni_0.9Cu_0.1Fe₂O₄@rGO) confirmed that the nanocomposites due to highly conductive nature and relatively high surface area showed better capacitive behavior as compared to bare nanoparticles. This enhanced electrochemical energy storage properties of nanocomposites were attributed to the graphene and also supported by electrical (I-V) measurements. The cyclic stability experiments results showed ~65% capacitance retention after 1000 cycles. However this retention was enhanced from 65% to 75% for the copper substituted nanoparticles (Ni_0.9Cu_0.1Fe₂O₄) and 65–85% for graphene based composites. All this data suggest that these nanoparticles and their composites can be utilized for supercapacitors electrodes fabrication.     

Parallel query execution over encrypted data in database-as-a-service (DaaS)

The Journal of Supercomputing - The main challenge in database-as-a-service is the security and privacy of data because service providers are not usually considered as trustworthy. So, the data...