Groundwater potential modelling in a soft rock area using a GIS

A Geographical Information System (GIS) integration tool is proposed to demarcate the groundwater potential zone in a soft rock area using seven hydrogeologic themes: lithology, geomorphology, soil, net recharge, drainage density, slope and surface water bodies. Except for net recharge and slope, the other five themes are derived from remote sensing data. IRS-1B LISS-II data was used for a 631 km² area in Midnapur District, West Bengal, India. While slope was calculated using topographic sheets, net recharge was obtained from annual water table fluctuation data. Each feature of all the thematic maps was evaluated according to its relative importance in the prediction of groundwater potential. The evolved GIS-based model of the study area was found to be in strong agreement with available borehole and pumping test data.     

Characterization of Ceramic Foam Filters Used for Liquid Metal Filtration

In the current study, the morphology including tortuosity, and the permeability of 50-mm thick commercially available 30, 40, 50, and 80 pores per inch (PPI) alumina ceramic foam filters (CFFs) have been investigated. Measurements have been taken of cell (pore), window, and strut sizes, porosity, tortuosity, and liquid permeability. Water velocities from ~0.015 to 0.77 m/s have been used to derive both first-order (Darcy) and second-order (Non-Darcy) terms for being used with the Forchheimer equation. Measurements were made using 49-mm “straight through” and 101-mm diameter “expanding flow field” designs. Results from the two designs are compared with calculations made using COMSOL 4.2a^® 2D axial symmetric finite element modeling (FEM), as a function of velocity and filter PPI. Permeability results are correlated using directly measurable parameters and compared with the previously published results. Development of improved wall sealing (49 mm) and elimination of wall effects (101 mm) have led to a high level of agreement between experimental, analytic, and FEM methods (±0 to 7 pct on predicted pressure drop) for both types of experiments. Tortuosity has been determined by two inductive methods, one using cold-solidified samples at 60 kHz and the other using liquid metal at 50 Hz, giving comparable results.     

Effect of precipitation on the geological development of badlands in arid regions

The main objective of this paper was to study the effect of precipitation on the geological development of badlands in arid regions. Field observations and laboratory investigations were carried out to characterize the surface soils of the Avonlea badlands in southern Saskatchewan, Canada, which is currently experiencing a rapid development in infrastructure. Three distinct surface sediments were identified: an upper slope of cemented sandstone, a mid-slope on weathered mudrock and a relatively flat basal pediment. Each of these soils reacts differently to rainfall events. Precipitation results in grain size reduction which, together with the consistency limits, explains the water sensitivity of the soils; the fines increased by 16% in the cemented sandstone, 78% in the weathered mudrock and 33% in the basal pediment. Erosion susceptibility was highest in the basal pediment (2% clays) followed by cemented sandstone (cementation by 6% active clays) and then by weathered mudrock (cohesion due to the 40% clay).     

Imaging-based detection of AAR induced map-crack damage in concrete structure

Imaging-based inspection methods are increasingly being employed for crack detection in concrete structures, because they provide quantitative information compared to inspections based solely on conventional visual approaches. However, efficient image analysis methods are needed. This study proposes the application of the grey level co-occurrence matrix (GLCM) texture analysis approach and an artificial neural network (ANN) classifier to obtain surface damage information, such as the total amount of superficial cracking, as well as the total length, and range of crack widths. These methods were applied to thermographic, visual colour and greyscale images of concrete blocks from CANMET that were exposed outdoors for ten years, as well as slabs from GRAI that were kept indoors, all specimens exhibiting various levels of alkali-aggregate reaction (AAR) damage. Results of the classifications show that the greyscale imagery performed fairly well, with an overall classification accuracy range of 72.3–76.5% for the CANMET blocks, and 68.7–75.3% for the GRAI slabs. Classifications using the colour imagery were slightly better than the greyscale imagery, with accuracies ranging from 71.4% to 75.2% for CANMET blocks and 70.9–72.0% for the GRAI slabs. The thermographic imagery, however, produced the highest overall classification accuracies, which range from 73.1% to 76.3% for the CANMET blocks and 74.2–76.9% for the GRAI slabs. The results show that all three types of imagery are relatively effective in characterizing and quantifying crack damage; however, the infrared thermography produced more accurate results compared to the visual colour, and greyscale images.     

Zero-current Switching Series Resonant High-voltage DC-DC Converter with Series-connected Primary Windings of Center-tapped Transformer

Abstract—This article proposes a novel zero-current switching series resonant inverter-fed voltage multiplier based high-voltage DC-DC converter. The series resonant inverter in the proposed topology has two power switches (insulated-gate bipolar transistors), two resonant capacitors, and only one high-voltage transformer with center-tapped primary windings. The power switches are connected in the form of a half-bridge network. The leakage inductances of the transformer's primary windings together with resonant capacitors form two series resonant circuits. The series resonant circuits are fed alternately by operating power switches with an interleaved half-switching cycle. The secondary winding of the high-voltage transformer is connected to a voltage multiplier circuit to rectify and boost the voltage. The converter operates in discontinuous conduction mode, and its output voltage is regulated by pulse-frequency modulation. Therefore, all the power switches turn ON and OFF at the zero-current switching condition. The main features of the proposed converter are lower power loss, less cost, and smaller size compared to previously proposed series resonant high-voltage DC-DC converters. The experimental results of a 130-W prototype of the proposed converter are presented both for dynamic and steady-state operation. The results confirm the excellent operation and performance of the converter.     

Vibrations of functionally graded cylindrical shells based on elastic foundations

In this paper, a study on the vibrations of functionally graded cylindrical shells based on the Winkler and Pasternak foundations is presented. The shell equations are amended by inducting the moduli of the Winkler and Pasternak foundations. The wave propagation method is employed to solve the shell dynamical equations. The method is based on the approximate eigenvalues of characteristic beam functions. The validity and accuracy of the present approach are verified by a number of comparisons.     

Magnetically controlled shape-memory effects of hybrid nanocomposites from oligo(ω-pentadecalactone) and covalently integrated magnetite nanoparticles

The covalent integration of inorganic nanoparticles in polymer matrices has gained significance for improving the structural properties of polymer-based materials. Here we report on the performance of poly(ω-pentadecalactone) networks with magnetite nanoparticles as netpoints in their magnetically-controlled shape-memory capability. Hybrid nanocomposites with magnetite nanoparticle content ranging from 5 to 11 wt% were prepared by reacting two types of oligo(ω-pentadecalactone) (OPDL) based precursors with terminal hydroxy groups, a three arm OPDL (³AOPDL, M_n = 6000 g mol⁻¹) and an OPDL (M_n = 3300 g mol⁻¹) coated magnetite nanoparticle (∅ = 10 nm), with a diisocyanate. Homogenous hybrid nanocomposites were obtained independent from the weight content of the OPDL decorated nanoparticles in the samples. At 100 °C (T > T_m-OPDL) the covalent integration of the nanoparticles increased the mechanical strength with increasing weight content whereby the elasticity remained almost constant. In magnetically-controlled one-way dual-shape experiments the shape fixity decreased from 95% to 90% but the shape recovery increased slightly from 95% to 97% when the nanoparticle content was increased. In magnetically-controlled reversible dual-shape experiments the nanoparticles had a restraining effect and the maximum shape-change of 65% for hybrid nanocomposites with 5 wt% magnetite nanoparticles was reduced to 36% when the particle content was increased to 11 wt%. These results show that the performance of hybrid nanocomposites can be tailored by nanoparticle content, however in terms of their applicability either mechanical strength or actuation capability should be focussed in the material selection.     

Role of Nd-Ni on structural,spectral and dielectric properties of strontium-barium based nano-sized X-type ferrites

The influence of neodymium and nickel substitution on structural and dielectric parameters was investigated in strontium-barium X-type hexagonal ferrites having composition SrBaCu_2?xNi_xNd_yFe_28?yO₄₆ (x = 0, 0.2, 0.4, 0.6, 0.8, 1 and y = 0, 0.02, 0.04, 0.06, 0.08, 0.1). Sol-gel method was employed for synthesizing these hexagonal ferrites. The XRD plots of all studied materials which were annealed at 1250 °C show single phase characteristics. Lattice parameter ‘c’ increased as a consequence of larger radius of rare earth ion (Nd³⁺) as compared to (Fe³⁺), while lattice parameter ‘a’ showed very small variation. The cell volume was obtained in the range 2508.32–2523.75 (ų). The inclusion of Nd-Ni also affected X-ray density, bulk density and porosity. The FTIR spectroscopy indicated the particular absorption peaks of hexagonal ferrites and it was performed in the range of 500–700 cm^?1. On account of Nd-Ni doping, the dielectric constant, dielectric loss and AC-conductivity showed decreasing trend. The occupancy of Nd³⁺ ions at octahedral site impedes the valence alternation of Fe³⁺; therefore there was decrease in dielectric permittivity. Ac conductivity has been decreased from 9.14 to 6.49 (Ω cm)^?1 at frequency of 2.7 GHz. The Cole-Cole plots of synthesized materials noticeably revealed grain boundary contribution. The appearance of single semi-circle in impedance Cole-Cole graphs confirms the exceptional role of grain boundaries in the conduction process. The considerably lower dielectric parameters of investigated nano X-type ferrites propose their feasibility for high-frequency applications (phase shifters, dielectric resonators, stealth technology etc).