Fault localization algorithm in computer networks by employing a genetic algorithm

Abstract

Fault localization is an important part in communication networks. Faults are unwanted and unavoidable in communication systems, and hence, their quick detection and localization is essential for sustaining the health of the network. This paper proposes an end-to-end approach that uses passive measurements for fault localization in communication networks. We formulate the fault localisation issue as an optimisation problem and then employ the genetic algorithm technique to solve it. Extensive simulation results show that although our algorithm needs to test only a small set of network components to localise all faults, it can infer the faulty nodes in at least 97% of cases. This simulation shows that the proposed algorithm, called genetic algorithm-based fault localisation is superior to the other approaches to localise all faults in a network.     

Queue Analysis and Multiplexing of Heavy-tailed Traffic in Wireless Packet Data Networks

Recent research based on traffic measurements shows that Internet traffic flows have a fractal nature (i.e., self-similarity property), which causes an underestimation of network engineering parameters when using the conventional Poisson model. Preliminary field measurements demonstrate that packet data traffic in wireless communications also exhibits self-similarity. In this paper, we investigate the queuing behavior of self-similar traffic flows for data applications in a packet-switching single-server wireless network. The traffic is generated by an on–off source with heavy-tailed on periods and exponentially distributed off periods. We extend previous analysis of a relation among the asymptotic distribution of loss probability, traffic specifications, and transmission rate for a wireline system to a wireless system, taking into account wireless propagation channel characteristics. We also investigate the multiplexing of heavy-tailed traffic flows with a finite buffer for the downlink transmission of a wireless network. Computer simulation results demonstrate that assumptions made in the theoretical analysis are reasonable and the derived relationships are accurate.     

Statistical optimization of process conditions for photocatalytic degradation of phenol with immobilization of nano TiO<Subscript>2</Subscript> on perlite granules

Response surface methodology (RSM) using D-optimal design was applied to optimization of photocatalytic degradation of phenol by new composite nano-catalyst (TiO₂/Perlite). Effects of seven factors (initial pH, initial phenol concentration, reaction temperature, UV irradiation time, UV light intensity, catalyst calcination temperature, and dosage of TiO₂/perlite) on phenol conversion efficiency were studied and optimized by using the statistical software MODDE 8.02. On statistical analysis of the results from the experimental studies, the optimum process conditions were as follows: initial pH, 10.7; initial phenol concentration, 0.5 mM; reaction temperature, 27 °C; UV irradiation time, 6.5 h; UV light intensity, 250 W; catalyst calcination temperature, 600 °C; and TiO₂/perlite dosage, 6 g/L. Analysis of variance (ANOVA) showed a high coefficient of determination (R²) of 91.8%.     

Interactive multi-modal suturing

We present a mechanics-based interactive multi-modal environment designed as part of a serious gaming platform. The specific objectives are to teach basic suturing and knotting techniques for simple skin or soft tissue wound closure. The pre-wound suturing target, skin, or deformable tissue is modeled as a modified mass-spring system. The suturing material is designed as a mechanics-based deformable linear object. Tools involved in a typical suturing procedures are also simulated. Collision management modules between the soft tissue and the needle, the soft tissue and the suture are analyzed. In addition to modeling the interactive environment of a typical suturing procedure, basics of the modeling approaches on the evaluation of a stitch formed by the user are also discussed. For example, if needle insertion points are too close from each other or to the edge of the wound, when the suture is pulled, the suture will tear the soft tissue instead of suturing the incision together. Experiment results show that our simulator can run on a standard personal computer and allow users to perform different suturing patterns with smooth graphics and haptic feedback.     

The effect of skull-pin insertion on cerebrospinal fluid pressure and cerebral perfusion pressure: influence of sufentanil and fentanyl

Directed delivery and distribution of anaesthetics (novocaine, lidocaine, trimecaine) immobilized on finely dispersed iron powders under the influence of an external magnetic field in body tissues of test animals have been studied. The data of emission spectral analysis relating to concentration of iron in soft and bone tissues of animals influenced by constant and alternating magnetic field on front and reverse sides over a period from 0 to 180 min are given.     

Robust image watermarking scheme using bit-plane of hadamard coefficients

Multimedia Tools and Applications - Nowadays, due to widespread usage of the Internet, digital contents are distributed quickly and inexpensively throughout the world. Watermarking techniques can...     

All‐pass sections with rich cascadability and IC realization suitability

In this paper, two new circuit configurations for realizing voltage‐mode (VM) all‐pass sections (APSs) are presented. The proposed circuits employ only two differential voltage current conveyors (DVCCs) and are cascadable with other VM circuits due to their high‐input and low‐output impedances. The first configuration uses a grounded resistor and a grounded capacitor without requiring matching constraints, whereas the second employs two grounded resistors and a grounded capacitor with a single matching condition. While the first configuration can realize only one all‐pass response, the second can provide inverting and non‐inverting all‐pass responses with selection of appropriate input port. Adding two grounded resistors to the proposed filters, variable gain APSs can also be obtained. As applications, two quadrature oscillators, each of which using one of the proposed all‐pass circuits, one grounded resistor and one grounded capacitor are presented. SPICE simulation results are included to verify the theory. Copyright © 2010 John Wiley & Sons, Ltd.     

Removal of hydrogen sulfide from methane using commercial polyphenylene oxide and Cardo-type polyimide hollow fiber membranes

The performance of commercially available poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) and Cardotype polyimide (PI) hollow fiber membranes was investigated in removing hydrogen sulfide from methane in a series of bench-scale experiments. It was observed that in the concentration range of hydrogen sulfide in methane from 101 to 401 ppm, the methane permeability decreased in the presence of hydrogen sulfide for Cardo-type polyimide hollow fiber membranes, whereas the PPO membrane performance was not affected. The separation coefficients of hydrogen sulfide/methane were 6 and 4 for PI and PPO membranes, respectively. Effects of temperature on the performance of PI and PPO membranes were investigated. It was observed that the permeabilities of both components of the mixture increased by increasing temperature, whereas the selectivities remained constant.     

Removal of Diazinon from aqueous solution by electrocoagulation process using aluminum electrodes

Electrocoagulation (EC) is an electrochemical method to treat polluted wastewaters and aqueous solutions. In this paper, the removal of Diazinon was studied by EC on aluminum electrode. The effect of several parameters such as initial concentration of Diazinon, current density, solution conductivity, effect of pH, and electrolysis time were investigated on EC performance. The obtained results showed that the removal efficiency of EC depends on the current density, initial concentration of Diazinon and electrolysis time. The optimum pH is 3 and also the solution conductivity has no significant effect on removal efficiency.