New current-mode current-controlled universal filter with single input and three outputs

In this study, a new current-mode current-controlled universal filter with single input and three outputs is presented. The proposed circuit uses single-output current controlled conveyors (CCCIIs) and can simultaneously realize lowpass, bandpass and highpass filter functions all at high impedance outputs. Realization of notch and allpass responses does not require additional active elements. The circuit enjoys independent current-control of the parameters ω₀ and ω₀/Q without disturbing the gains of the lowpass, bandpass and highpass filters. Both its active and passive sensitivities are low.     

A Novel Grounded Inductor Realization Using a Minimum Number of Active and Passive Components

In this study, we present a new topology for realizing a grounded inductor employing only a single current conveyor, called a negative‐type modified inverting second‐generation current conveyor (MICCII‐), and a minimum number of passive components, two resistors, and one capacitor. The non‐ideality effects of the MICCII‐on a simulated inductor are investigated. To demonstrate the performance of the presented inductance simulator, we use it to construct a third order Butterworth high‐pass filter and a parallel resonant circuit. Simulation results are given to confirm the theoretical analysis.     

Effect of micronisation and electromagnetic radiation on physical and mechanical properties of Canadian barley

The effect of micronisation (high‐intensity infrared heating) and microwave radiation of normal barley (NB), high‐amylose barley (HAB) and waxy barley (WB) on the physical and mechanical properties was studied. Samples were tempered to 42–45% moisture content and then subjected to infrared or microwave radiation to reduce the moisture content to approximately 10%. The grain surface temperature during radiation was maintained at 100 °C. The changes in physical and mechanical properties were compared with unprocessed samples. Thermal radiation increased slightly the volume of the kernels because of the diffusion of water vapour from inside to the outer surface. These changes resulted in a decrease in particle and bulk densities. Thermal radiation affected the Hunter colour values, as well. The mechanical properties including bio‐yield point, modulus of elasticity and breakage susceptibility were affected by micronisation and microwave heating.     

A web-based high-performance multicriteria decision support system for medical diagnosis

Multicriteria decision making (MCDM) methods can be powerful aids for evaluating patients' medical information in medical diagnostic systems. Technique ordered preference by similarity to the ideal solution (TOPSIS) is one of the more widely used MCDM methods in decision support systems. For the purpose of this work, the TOPSIS method is modified into a more suitable form and used for the implementation of a web-based medical diagnostic system. In our modified TOPSIS method, we have utilized fuzzy logic so that users can more accurately describe their symptoms. The data given to the modified TOPSIS method are often massive in proportions and may take a considerable amount of time to generate a ranking of alternatives. TOPSIS lends itself to parallel computation because it is virtually a combination of matrix computations. Therefore, computer parallelism is implemented so that a large amount of input data can be handled simultaneously, hence decreasing overall execution time. In addition, to make our MCDM system more accessible, we have designed our system to be web based. The web-based medical diagnosis system includes a dynamically generated web-based user interface, while the parallel implementation of the modified TOPSIS component, in conjunction with the Common Gateway Interface, forms the back end of the system. © 2007 Wiley Periodicals, Inc. Int J Int Syst 22: 1083–1099, 2007.     

A fuzzy approach for the earned value management

The Earned Value technique is a crucial technique in analyzing and controlling the performance of a project which allows a more accurate measurement of both the performance and the progress of a project. This paper presents a new fuzzy-based earned value model with the advantage of developing and analyzing the earned value indices, and the time and the cost estimates at completion under uncertainty. As the uncertainty is inherent in real-life activities, the developed model is very useful in evaluating the progress of a project where uncertainty arises. A small example illustrates how the new model can be implemented in reality.     

Tensile behaviour of patch-repaired CFRP laminates

The present study examines the tensile behaviour of composite structures repaired by bonding external patches. Various patches of different stacking sequences placed on both sides of the parent plate were considered. Damage development and the failure process of the repaired plates were analyzed and a parent plate fracture model has been proposed. Optimised patch repairs were calculated by finite element modelling. It was found that high stress concentration along the longitudinal edges of circular patches and/or at the transverse edges of the hole leads to early damage initiation in the parent plate. However, the position of damage initiation and the process of damage progression depend particularly on the properties of repair patches. In order to optimise patch repairs, finite element modelling was used and it was founded possible to attain over 90% of the strength of an unnotched specimen. The optimised patch design can be characterised by an optimal strength ratio R^*, which should be minimized when selecting repair parameters.     

Highly efficient dye-sensitized solar cell prepared by electrophoretic deposition method: the effect of TiO<Subscript>2</Subscript> films thickness on the performance of cells

In this work, nanocrystalline P25 TiO₂ films with different thicknesses were deposited on FTO coated glass substrates by an electrophoretic deposition technique (EPD) and applied as the work electrode for dye-sensitized solar cells (DSSC) using cis-bis(isothiocyanato)(2,2'-bipyridyl-4,4'-dicarboxylato)(4,4'di-nonyl-2'-bipyridyl) ruthenium(II) (Z907, Dyesol) as sensitizing dye.The results showed that the increasing the thickness of TiO₂ films lead to increase the adsorption of the dye on the TiO₂ layers which in turns improved the short-circuit photocurrent (J_sc) and open-circuit voltage (V_oc), respectively. Furthermore, it was found that the effects of the surface states on the recombination of the photo-injected electrons (electron–hole pairs) in the TiO₂ films strongly depend on theTiO₂ electrode annealing temperature. Finally, a DSSC with a 32.82 μm thickness for TiO₂ film annealed at 600°C produced the highest conversion efficiency with an incident solar energy of 100 mW/cm² (η = 8.23%, J_sc = 15.98, V_oc = 0.73, FF = 0.7).     

Polyoxometalate–molybdenylacetylacetonate hybrid complex: A reusable and efficient catalyst for oxidation of alkenes with tert-butylhydroperoxide

The hybrid complex consist of molybdenylacetylacetonate complex covalently linked to a lacunary Keggin-type polyoxometalate, K₈[SiW₁₁O₃₉] (POM), was synthesized and characterized by elemental analysis, SEM, XRD, diffuse reflectance UV–Vis and FT-IR spectroscopic methods. The hybrid complex, [MoO₂(acac)–POM] (1), was used for alkene epoxidation with tert-BuOOH in 1,2-dichloroethane as solvent. The complex (1) can catalyze epoxidation of various olefins including non-activated terminal olefins. The effect of reaction parameters such as oxidant, solvent, and temperature on the epoxidation of cyclooctene was also investigated. This heterogeneous catalyst was reused several times in the oxidation of cyclooctene.     

Stability problems in universal current-mode filters

Analog circuit designers have usually focused on the design of circuits employing a minimum number of components, occupying less area and dissipating less power. However, some important issues such as signal limitations and especially stability problems of the analog circuits have not received considerable attention in the literature. Hence, the work described in this paper deals with the stability problems of two new current-mode analog filters employing multiple output current controlled conveyors (MOCCCIIs). Toward that end, a single pole model is replaced for each non-ideal current gain of the MOCCCIIs. Both of the novel universal current-mode active-C filters can simultaneously realize low-pass, band-pass and high-pass/notch filter responses. SPICE and MATLAB simulation results are given to verify the theoretical analysis.