Effect of pre-treatment and hydraulic retention time on biohydrogen production from organic wastes

This study investigated the effect of pre-treatment and hydraulic retention time (HRT) on biohydrogen production from organic wastes. Various pre-treatments including thermal, base, acid, ultrasonication, and hydrogen peroxide were applied alone or in combination to enhance biohydrogen production from potato and bean wastewater in batch tests. All the pre-treated samples showed higher hydrogen production than the control tests. Hydrogen peroxide pre-treatment achieved the best results of 939.7 and 470 mL for potato and bean wastewater, respectively. Continuous biohydrogen production from sucrose, potato and bean wastewater was significantly influenced by reducing the HRT as 24, 18 and 12 h. Sucrose and potato showed similar behavior, where the hydrogen production rate (HPR) increased with decreasing the HRT. Optimum hydrogen yield results of 320 mL-H₂/g-VS (sucrose) and 150 mL-H₂/g-VS (potato) were achieved at HRT of 18 h. Bean wastewater showed optimum HPR of 0.65 L/L.d with hydrogen yield of 80 mL-H₂/g-VS at 24 h HRT.     

On the Protective Performance of Firefighters’ Garments: Air Gaps Between Fabric Layers

Municipal firefighters count on their protective garments to avoid skin burns caused by thermal and flame exposures. Typical firefighting garment consists of three layers of different fire-resistant fabrics named as outer shell, moisture barrier and thermal liner. This paper employed a numerical heat transfer model for firefighters’ garments, which paid more attention to modeling air gaps bounded between garment’s layers. The paper explored and compared the influences of air gaps bounded between garment’s layers on its protective performance. Specifically, the paper investigated the effect of a variation in the air gaps between the garment layers from 1 mm to 6 mm, a variation in the backside emissivity of the outer shell and moisture barrier layers from 0.9 to 0.1 and a variation in their typical thicknesses from 50% to 200% on the protective performance of garment. The results showed that increasing the width of the gap between the moisture barrier and the thermal liner, reducing the outer shell backside emissivity and increasing the moisture barrier thickness improves the protective performance of firefighters’ garments more than does increasing the width of the gap between the moisture barrier and outer shell, reducing the moisture barrier backside emissivity and increasing the outer shell thickness, respectively.     

Using discussion logic in analyzing online group discussions: A text mining approach

We propose a Discussion Logic-based Text Analytics (DiLTA) framework, which combines theories developed in social science and text mining fields. The framework extracts features that uncover discussion logic and uses these features in analyzing online discussions. A series of models are proposed including conversation disentanglement, coherence analysis, and visualization. Validation experiments showed that DiLTA achieved significantly superior performance over existing text analytics methods in reconstructing internal structure. A case study using DiLTA-enabled visualization on a healthcare forum illustrates the great potential of DiLTA in assisting comprehension of the internal linkage, structure, and logic of online group discussions.     

Configurable FFT Processor Using Dynamically Reconfigurable Resource Arrays

This paper presents results of using a Coarse Grain Reconfigurable Architecture called DRRA (Dynamically Reconfigurable Resource Array) for FFT implementations varying in order and degree of parallelism using radix-2 decimation in time (DIT). The DRRA fabric is extended with memory architecture to be able to deal with data-sets much larger than what can be accommodated in the register files of DRRA. The proposed implementation scheme is generic in terms of the number of FFT point, the size of memory and the size of register file in DRRA. Two implementations (DRRA-1 and DRRA-2) have been synthesized in 65 nm technology and energy/delay numbers measured with post-layout annotated gate level simulations. The results are compared to other Coarse Grain Reconfigurable Architectures (CGRAs), and dedicated FFT processors for 1024 and 2048 point FFT. For 1024 point FFT, in terms of FFT operations per unit energy, DRRA-1 and DRRA-2 outperforms all CGRA by at least 2× and is worse than ASIC by 3.45×. However, in terms of energy-delay product DRRA-2 outperforms CGRAs by at least 1.66× and dedicated FFT processors by at least 10.9×. For 2048-point FFT, DRRA-1 and DRRA-2 are 10× better for energy efficiency and 94.84 better for energy-delay product. However, radix-2 implementation is worse by 9.64× and 255× in terms of energy efficiency and energy-delay product when compared against a radix-2⁴ implementation.

     

New approach to mimic rheological actual shear rate under wall slip condition

Engineering with Computers - The presence of wall slip in concentrated suspensions affect the rheological measurements such as shear stress, shear rate, and viscosity. The measured shear rate will...     

Energy efficient scheduling in local area networks

Wireless Networks - In Wireless Local Area Networks (WLAN), portable devices such as notebooks, tabs, and smart phones are powered by batteries with limited energy. With the great increase of using...     

Aging of novel membranes made of PVA and cellulose nanocrystals extracted from Egyptian rice husk manufactured by compression moulding process

Novel membranes consisting of polyvinyl alcohol (PVA), cellulose nanocrystals (CNCs) originated from Rice Husk (RH), Glutaraldehyde (GLA) and Glycerine (G) were manufactured by the compression moulding process. Rice husk is a new source to isolate pure cellulose nanocrystals via mechanical and chemical treatment. The biodegradability of the membranes has been evaluated using UV accelerated weathering as well as a soil burial test. The morphology of membranes (PVA/RH-CNCs) was characterized by using the Scanning Electron Microscope (SEM). The chemical structure of the membranes (PVA/RH-CNCs) was characterised by Fourier-Transformation Infrared (FTIR) spectroscopy as well as wide-angle X-ray diffraction. The mechanical properties of the membranes were evaluated using standard techniques. Swelling and weight loss resulting from biodegradation were also evaluated. The results showed that the developed transient membranes can be used as food packaging bags owing to biodegradability (weight loss) under irradiation and during soil burial.