MoS2-Ti复合膜的结构及其抗氧化性能

利用非平衡磁控溅射仪在碳/碳复合材料表面制备了MoS2-Ti复合膜.采用XRD,Raman光谱、X射线光电子能谱仪对其结构进行了表征,并利用X射线光电子能谱仪对复合膜的抗氧化性能进行了研究.研究结果表明:所制备的MoS2-Ti复合膜为非晶态结构;MoS2-Ti复合膜具有良好的抗氧化性能,将其在蒸馏水中浸泡200 h后,Mo4+没有被氧化.     

Chromium distribution between liquid iron and molten basic slags

An equilibrium study was made of the distribution of chromium and oxygen between liquid iron, containing less than 1 pct Cr, and simple slags of the CaO(MgO)-SiO₂-FeO-Cr₂O₃ type in the temperature range 1526° to 1734°C The effects of slag oxidation, temperature, and basicity were observed.     

The preparation of tantalum powder using a MR-EMR combination process

In the conventional metallothermic reduction (MR) process used to obtain tantalum powder in batch-type operation, it is difficult to control the morphology and location of the tantalum deposits. In contrast, an electronically mediated reaction (EMR) process is capable of overcoming this difficulty. It has the advantage of being a continuous process, but has the disadvantage of a poor reduction yield. A process known as the MR-EMR combination process is able to overcome the shortcomings of the MR and EMR processes. In this study, an MR-EMR combination process is applied to the production of tantalum powder via sodium reduction of K₂TaF₇. In the MR-EMR combination process, the total charge passed through an external circuit and the average particle size (FSSS) increase as the reduction temperature increases. In addition, the proportion of fine particles (−325 mesh) decreases as the reduction temperature increasess. The tantalum yield improved from 65 to 74% as the reduction temperature increased. Taking into account the charge, impurities, morphology, particle size and yield, a reduction temperature of 1123 K was found to be optimum for the MR-EMR combination process.     

提高H13钢分流锥的使用寿命

分析了Ｈ１３钢分流锥的失效机理，研究了离子渗氮，气体氮碳共渗及常压等离子喷涂等对其使用寿命的影响。     

ANALYSIS ON THE BEHAVIOR OF PRECIPITATES IN ULTRA-THIN HOT STRIP OF PLAIN LOW CARBON STEEL PRODUCED BY COMPACT STRIP PRODUCTION

This paper investigated the mechanism of precipitation and its influence upon prop-erties of ultra-thin hot strips of low carbon steel produced by CSP techniques using experiment and thermodynamics theory. The experimental results show that there are lots of fine and dispersive precipitates in microstructures. By analysis, most of aluminum nitrides are in grains, while coexisted precipitates of MnS are along grain boundaries. Coexisted precipitates compose cation-vacancy type oxides such as Al2O3 in the core, while MnS is at the fringe of surface. The precipitation behavior of AlN and MnS in the hot strip is studied by thermodynamic calculation. At last, implica-tions between strengthening effect and techniques are analyzed using obtained solubility products.     

急弯段闸孔出流的弯道水流特性研究

在河弯处修建水工建筑物时,研究弯道水流特性对水工建筑物布置的影响十分重要。采用RNCκ-ε紊流模型对急弯段闸孔出流的弯道水流进行了三维数值模拟。通过模拟计算,比较分析了急弯段不同闸位、不同流量条件下闸孔过流时的流速分布、紊流动能、压强分布和环流等相关水流特性与变化规律。分析研究结果表明,闸坝位于弯道上游时,弯道对闸坝过流的影响最小,但需对闸坝下流弯道凸岸岸坡附近区域采取一定的防护措施;闸坝布置在弯道中游时,过闸水流受弯道的影响最小,闸室水流的稳定性、闸门的工作安全以及闸墩的空蚀破坏都是实际工程中需要注意的重点。数值模拟验证与物理模型试验结果吻合较好,计算精度较高,能够满足相关计算研究要求。     

Model checking dynamic pushdown networks

A dynamic pushdown network (DPN) is a set of pushdown systems (PDSs) where each process can dynamically create new instances of PDSs. DPNs are a natural model of multi-threaded programs with (possibly recursive) procedure calls and thread creation. Thus, it is important to have model checking algorithms for DPNs. We consider in this work model checking DPNs against single-indexed LTL and CTL properties of the form \({\bigwedge f_i}\) such that f _i is a LTL/CTL formula over the PDS i. We consider the model checking problems w.r.t. simple valuations (i.e., whether a configuration satisfies an atomic proposition depends only on its control location) and w.r.t. regular valuations (i.e., the set of the configurations satisfying an atomic proposition is a regular set of configurations). We show that these model checking problems are decidable. We propose automata-based approaches for computing the set of configurations of a DPN that satisfy the corresponding single-indexed LTL/CTL formula.     

Forming an intention to act on recommendations given via online social networks

Online social networks (OSN) are technology-enabled relationship tools in which a user creates a profile, connects to other individuals, and shares user-generated content with them. One of the many features OSN offer is the ability to post messages in the form of product and service recommendations. Although word-of-mouth research has examined this type of personal communication to intentionally influence consumer decisions, limited understanding exists regarding when a user acts upon a recommendation received from one of their contacts. In this study, we draw on relationship theories and research on trust to analyze the impact relationship characteristics and behaviors of the OSN contacts have on trust in the recommendation that subsequently leads a user to act on this OSN contact’s recommendation. The results of a survey of 116 OSN users showed that closeness, excessive posting behavior, and past recommendation experience have a positive impact on trust and intention to act on the recommendation. One characteristic of the relationships, that is, similarity, however, does not affect recommendation trust in the context of OSN. The findings enhance our understanding of relationships and their defining characteristics in OSN. The results also provide insights into how companies might leverage OSN in their marketing efforts.