Cisco SRP与以太网的第二层互通方式

在扩展以太网协议用于城域或广域组网的过程中，暴露出了传统的以太网树型或星型拓扑缺乏有效的性能监视和保护倒换协议的弱点，网络的维护也比较复杂，在传输骨干上使用环形拓扑有助于解决这个问题。Cisco SRP是一种基于双纤环型拓扑的媒体访问协议，主要应用于城域或广域的传输骨干环上，本文提出了以太网和CiscoSRP骨干环之间在第二层上互通的两种方式，并分析了两种互通方式实现中的一些具体问题。     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

关于彩涂压型钢板构件设计中的选材问题

近年来 ,在彩涂压型钢板构件设计应用中 ,由于不重视、不了解如何合理选材 ,在实际工程的材料订货中也都不提出对材料性能的技术要求 ,致使供货材质、材性不能满足使用要求 ,存在降低彩板构件承载力或减少其使用寿命的隐患 ,应引起设计人员的注意。同时对当前如何按使用条件及材料供应条件合理地选定彩板材料的性能技术要求 ,包括基板钢材的级别及力学性能、板厚及公差控制要求、镀锌层质量与彩涂层类别以及参照的技术标准等 ,提出了一些建议 ,供设计应用参考。最后还对板的强度、厚度以及镀铝锌板的选用问题进行了讨论     

A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

Integrated Automation System for Rare Earth Countercurrent Extraction Process

Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity, recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, ontimal management and remarkable benefits.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

Effects of Fimbria-Fornix, Hippocampus, and Amygdala Lesions on Discrimination Between Proximal Locations.

The conditioned cue preference (CCP) task was used to study the information required to discriminate between spatial locations defined by adjacent arms of an 8-arm radial maze. Normal rats learned the discrimination after 3 unreinforced preexposure (PE) sessions and 4 food paired-unpaired training trials. Fimbria-fornix lesions made before, but not after, PE, and hippocampus lesions made at either time, blocked the discrimination, suggesting that the 2 structures processed different information. Lateral amygdala lesions made before PE facilitated the discrimination. This amygdala-mediated interference with the discrimination was the result of a conditioned approach response that did not discriminate between the 2 arm locations. A hippocampus/fimbria-fornix system and an amygdala system process different information about the same learning situation simultaneously and in parallel. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

由三面投影图生成三维立体图的方法研究

针对创新设计中零部件的三维虚拟造型问题，提出了一种由二维投影图生成三维立体图的计算机化辨识方法。通过辨识简单三维立体的形状和空间位置，克服了二维图形中面的积聚性和零件之间不规则相贯和截交曲线的识别问题，进而实现了复杂组合形体的计算机化设计与造型。最后，以箱体类零件为例，在AutoCAD环境下利用VC 和ObiectARX开发工具编程验证了该方法的有效性。