基于ANN实现的供应需求预测方法

基于人工神经网络技术，建立了后勤供应需求的网络预测方法，并以某区域高校后勤保障需求为例，给出了后勤供应需求预测的步骤与实现过程。     

紫外激光诱导胃癌组织自体荧光的研究

本文测量了紫外激光（３０８ｎｍ）激发诱导正常组织和胃癌组织３１５ｎｍ－６００ｎｍ波段的自体荧光，发现胃癌组织在此荧光光谱不同于正常组织的荧光光谱。根据两者４的区别，可以把胃癌组织从正常组织中区分出来，这为诊断胃癌提供了一个新的思路。     

三塘湖盆地上古生界烃源岩镜质组反射率异常研究

镜质组反射率是评价有机质成熟度的重要指标 ,然而由于地质因素和测试技术的原因 ,镜质组反射率测量值常与预计值有一定的偏差。在三塘湖盆地上古生界烃源岩中 ,可以观察到镜质组反射率的局部增强和镜质组反射率的抑制。局部增强多分布在上二叠统的烃源岩中 ,主要与火山活动有关。这种反射率的增强在平面上分布广泛 ,但纵向上影响范围较小。反射率的抑制是在上古生界烃源岩含有较高含量的腐泥组分背景下产生的。用氢指数模板方法对抑制进行了校正 ,抑制的幅度最大可达 0 .3%     

平面Z-型软磁铁氧体频率特性的研究

研究分析了Co2Z材料显微结构与磁性能的关系,在普通铁氧体工艺中引入预磁化处理方法,并适当控制二次再结晶现象,成功地研制出高性能的Co2Z型宽频材料,Z-型铁氧体材料的共振频率可达1.8GHz以上,截止频率在1GHz附近,起始磁导率在8-13之间,介电常数相对较低(ε'<30)。     

A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

工频电场对ADSS光缆特性的影响

随着电压等级的不断提高,超高压输电线路发展非常迅速.但是这些架空输电线路在运行时,附近存在较高的电场,对周围物体和公用走廊的其它线路会产生影响.电压等级越高,产生的电场影响越大.输电线路产生的电场越来越受到人们的重视.尤其是对于超高压输电线路,由于在电力铁塔上同塔悬挂全介质自承式光缆(ADSS),因此分析工频电场对ADSS光缆特性的影响非常必要.     

Selective recognition in molecularly imprinted polymer and its chromatographic characterization for cinchonine

A molecularly imprinting polymer (MIP) was synthesized via bulk polymerization under different conditions using anti-ague drug cinchonine (CN) as template. Infrared spectra (IR) results show that the template CNand functional monomer α-methyl acrylic acid (MAA) formed complexes before polymerization and the structure of complexes was simulated by Hyperchem. The results indicate that there are hydrogen bond or ionic bond between functional monomer and template molecule in acetonitrile solution. The MIP made in cold-initiated photo-polymerization has higher separation performance than that in the therm-initiated polymerization. The separation of the isomers CN and cinchonidine (CD) can be successfully obtained when its separate factor α reaches 1.82. Scatchard analysis suggests that the MIP recognizing CN with two classes of binding sites. The partition coefficient Kd, 1 and apparent maximum number nmax, 1 of binding sites with high affinity are 131.43 μmol/L and 58. 90 μmol/g, respectively,while Kd, 2 and nmax, 2 of binding sites with low affinity are 2.32 mmol/L and 169.08 mmol/g, respectively.     

环保易切削黄铜耐腐蚀性能研究

传统易切削黄铜多为铅黄铜，如HPb59-1、HPb63—3等，广泛应用于机械制造工业。铅黄铜零部件报废后将以各种形式污染环境。近年来，随着环保呼声的不断高涨，无铅易切削黄铜的研制成为必然。耐蚀性能是黄铜的重要使用性能之一，也是无铅易切削黄铜能否得到推广应用的关键。本实验以铋代铅并加入一定量的稀土制备的无铅易切削黄铜，其抗脱锌能力比传统易切削黄铜有较大提高。     

单源点法的一种改进

在应用能量线性叠加计算港内不规则波绕射系数时^[1,2]，通过假设不同的计算点具有不同的方向谱，从而增加单源点法考虑地形变化的能力。其中各计算点的方向谱由逆波向线追踪方向确定。本文由此观点建立数学模型。并通过实例计算。来验证这个想法。