国外钻井液和完井液用聚合物

９０年代以来，国外钻井液和完井液用聚合物添加剂的发展取得长足进步。本文介绍了国外目前用于钻井液和完井液的聚合物添加剂的类型及作用。     

布里奇曼法生长碲镉汞晶体的缺陷及其展望

简单介绍了布里奇曼法生长碲镉汞晶体的主要缺陷以及缺陷的控制原理，回顾了国内进行磅镉汞晶体生长的布里奇曼法及加速坩埚旋转技术的布里奇曼法（ＡＣＲＴ－Ｂ）研究的情况，并提出了进一步研究的问题。     

某微型起爆器引起的一起误爆事故分析

该文分析某微型起爆器引起的一起误爆事故，指出该起爆器设计上的缺陷及其对作业安全的威胁，提出防患建议。     

布里奇曼法生长碲镉汞晶体的固液界面形态研究

文中综述了布里奇曼法及加速坩埚旋转技术的布里奇曼法生工碲镉汞晶体过程中固液界面形态的研究结果，简单讨论了固液界面形态对组分分布的影响，并将两种技术所得的组分分布结果进行了比较，在分析影响固液界面形态因素的基础上，认为加速坩埚旋转技术是目前改善固液界面形态的有效方法。     

Simulated hot working,cold working,

An investigation was carried out on the effects of changing the hot-working, cold-working, and annealing parameters on the interaction between A1N precipitation and recrystallization in low- carbon steels containing significant amounts of Al and N. The primary aim was to determine whether laboratory torsion testing can be helpful in analyzing precipitation behavior in these steels. The approach taken was first to establish the baseline annealing behavior of material that was hot- and cold-worked in a mill and then to compare this with the behavior of material in which the hot and cold working were simulated by torsion testing. It was found, first of all, that torsion testing can indeed provide a good simulation of the industrial process of hot and cold working followed by annealing, even to the extent that a process as subtle as the inhibition of recrystallization by A1N precipitation can be accurately reproduced. The results also show that the interaction between precipitation and recrystallization during annealing is significantly influenced by the reheat temperature before hot working, as well as by the cooling rate after hot working.     

输入——输出迭代算法中松弛因子的确定

本文利用变分的手段提示了输入—输出迭代算法中松弛因子的取值规律。     

结构陶瓷的高温疲劳强度衰减理论

提出了陶瓷材料疲劳强度衰减理论并由此导出了各种疲劳关系式。建立了疲劳基本方程ｄσ＿ｒ／ｄ＿ｉ＝一Ａσ（ｔ）￣ｎｔ￣（－ｍ），得出了疲劳寿命公式Ｔ＝Ｍ（σ＿０－σ）／Ａσ￣ｎ（静疲劳时Ｍ＝１，连续增载疲劳时Ｍ＝ｎ＋１，循环疲劳时Ｍ＝（ｎ＋１）／（１＋Ｒ＋Ｒ￣２＋……＋Ｒ￣ｎ），逐级加载时，并导出不同疲劳方式下疲劳寿命间的关系。同时，用多种Ｓｉ＿３Ｎ＿４材料在高温中作了论证试验，结果与理论一致。     

参考信号频率自调整的数字相敏检波器算法的研究

本文提出了一种不需要外接同频参考信号的数字相敏检波器算法。该算法首先提取计算机产生的参考信号与被测信号频率的差值，然后根据该差值调整参考信号的频率直到满足要求。本文还讨论了数字相敏检波器的幅频特性，仿真试验表明理论分析与实际结果是一致的。该算法可以用于同频参考信号不能获得时正弦信号的幅度和相位测量。     

通过室内实验及同位素测井技术评价高分子聚合物驱油效果

2500万超高分聚合物室内驱油实验研究了聚合物分子量、浓度、粘度、聚用量、段塞组合等各项性能指标对驱油效果的影响。本文根据室内实验结果,在北一区断西注聚后期开展矿场试验,取得了较好的开发效果。试验前后对比,注入粘度明显增大,月含水上升速度得到有效控制,吸入剖面有了新的动用,有63.1%的油井出现了明显的二次受效特征,取得了显著的经济效益。同时对驱油效果进行系统分析。驱油效果表明:应用2500万超高分聚合物是进一步提高聚驱采收率的有效途径。     

EMMP: a highly efficient membership management protocol

Gossip (or epidemic) algorithms have recently become popular solutions to multicast message dissemination in peer-to-peer systems. Nevertheless, it is not straightforward to apply gossip to on-demand streaming because it often fails to achieve a timely delivery. To solve this problem and taking into account the characteristic of peers randomly joining and leaving in peer-to-peer systems, an Efficient Membership Management Protocol (EMMP) has been presented. Every node only needs to keep contact with O (log(N)) nodes, and EMMP can support the reliable dissemination of messages. Considering the “distance” between peers, it causes the major data to be transmitted in a local area and reduces the backbone’s traffic, and speeds up the dissemination of messages between peers. This paper has adopted the “goodfriend” mechanism to reduce the influence on the system when a peer fails or leaves. Simulation results show that EMMP is highly efficient, and both the redundancy and the delay of the system are well solved.