MPP中确定临界处理器数的方法

本文提出了并行求解问题时所应征用ＭＰＰ系统中临界处理器数的选择方法，该方法根据问题图中每一结点的时间特征进行选择，可操作性好，易于实现，特别适用于基于互连网络的ＭＰＰ系统和分布式系统。     

发动机扭矩与转速关系经验公式试验研究

在对发动机外特性曲线扭矩与转速实验数据分析的基础上，对原有的经验公式进行了分析、改进，提出了新的经验公式．由这一经验公式所计算的数值，在最大扭矩与最大功率点之间，可与实验数据拟合得很好．与原经验曲线相比，新经验曲线与实验曲线的离差可下降50％以上．     

水泥膨胀珍珠岩砂浆的保温试验研究与应用

荆江分洪北闸加固工程２号护坦（斜面）混凝土的保温层采用了水泥膨胀珍珠岩砂浆，并对这种材料的保温效果进行了试验研究。试验表明：水泥膨胀珍珠岩砂浆降低最高温差，减小内表温差，缩小表温变幅和防止混凝土表面裂缝效果显著。在北闸２号护坦混凝土表面铺设１万平方米保温层，获得良好效果。     

腹部CT扫描时两种呼吸控制法的优缺点比较

在腹部CT扫描时,需令病人暂停呼吸以保证图像的清晰度,为此可采用两种方法:口令法和腹带固定法。本文以实例分析了这两种方法特点和适用对象。     

Boundary element analysis of thin plates internally bounded by rigid patches

Procedures are described for modelling a structural system consisting of thin Kirchhoff plates with internal patch areas capable of displacing as rigid flat surfaces. The physical prototype for these patches could be interconnection points for one-dimensional frame type elements of various shapes and layout, rigidly connected at these finite size 'joints' in the plate. The numerical procedure for modelling the thin plate is the Direct Boundary Element Method (DBEM) and a simple overview of this procedure is provided. Potential trouble spots, of which the user should be aware, are described. The paper will be of interest to structural engineers for analysis of frames having both plate and simple frame elements, for example, building frames; and also to researchers seeking the greater detail that this refined procedure can provide. As a practical tool, the methods described are computationally competitive with existing procedures, including the more rugged approaches used by building structural engineers for dynamic and torsional analysis.     

Comparison of Displacement and Mixing Diffusers

In order to cumpare the peformance of different supply diffuers of ventilation air, the airflow passern, temperature stratifiation and contaminant dispersion in a furnitured office ventilated by three kinds of air diffuer were numerically investigated. The air diffuers studied in this paper are a quarter-cylinder displacement diffuer on the floor and mixing diffuers (linear and vortex diffuers) on the ceiling. The heat sources in the of-fice are considered to be 50% convective and 50% radiative. The k-? two-equatwn model of turbulence is employed to predict the turbulent diffusion. The results show that the displacement diffuser provides a rather uniform flow field with low velocify in most areas, and the vertical temperature difference from floor to ceiling is as high as 6 K. With the linear diffuser, the air velociry is high, and the temperature is uniform both horizontally and vertically. The air velocity generated by the vortex diffuser is moderate. The distributions of the temperature and the contaminant are rather uniform.     

最佳基数排序

基数排序由于其效率高而被广泛应用。通常,基数排序所用的基数是10,然而,如果求得一个基数r_(best),并且用r_(best)为基数进行基数排序使排序时间达到最小,则这将具有非常重要的意义。本文给出了求r_(best)的方法,分析了以r_(best)为基数进行基数排序的时间复杂度,提出了进一步提高效率的措施,并将以r_(best)为基数的基数排序速度与以10为基数的基数排序进行了比较。     

我国车用汽油的发展概况及发展方向探讨

介绍了我国车用汽油的发展轨迹 ,通过与国外先进标准的对比分析了我国车用汽油存在的不足 .指出我国在加入WTO后 ,更应不断升级车用汽油质量标准 ,需要从标准制定、炼油技术等多方面追赶世界先进水平 ,积极研制生产清洁型无污染汽油 ,从根本上消除汽车尾气对环境的污染 .     

海南福山凹陷地层可钻性及钻头选型

利用测井资料及室内实验建立的可钻性模型编制了计算机软件，用其建立了海南福山凹陷地层连续可钻性剖面，并推荐出钻头选型，和现场实钻情况相当的吻合，为钻头合理选型提供了依据。     

基于神经网络的降雨径流预报

本文将人工神经网络应用于二滩水电站以上支流鱼河的降雨径流预报，通过建模、计算、比较和分析可知，其非线性映射能力、自学习能力和灵活性，均能较好地反映降雨径流之间的非线性的、复杂的转换关系，结合流域水文特性并合理处理建模数据，值得进一步深入研究。