Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated with potassium hydroxide (KOH) and finally activated by using carbon dioxide (CO₂) gas to produce activated carbon. Pore structure and physical characteristics of the prepared kenaf fiber activated carbon (KFAC) were determined. Adsorption studies for divalent copper (Cu) ions were carried out to delineate the effect of contact time, temperature, pH and initial metal ion concentration on equilibrium adsorption capacity. The experimental data followed pseudo-second-order kinetics and Elovich Model than pseudo-first-order. Langmuir, Freundlich and Temkin models were implemented to analyze the parameters for adsorption at 30 °C, 50 °C and 70 °C. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o which represent Gibbs free energy, enthalpy and entropy, respectively, were evaluated. It was concluded that activated carbon from kenaf fiber (KFAC) can be used as an efficient adsorbent for removal of Cu (II) from synthetic wastewater.     

Guayule natural rubber composites: impact of fillers on their cure characteristics,dynamic and mechanical behavior

Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.

     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

Synthesis and Structural Investigation of Foldamer-Based Iodine-Supported Artificial Glycosidases

Glycosidases are a type of enzyme that hydrolytically cleave carbohydrates and form glycans for biologically important processes. The inadequacies of glycosidases or their genetic abnormalities are responsible for various diseases. Thus, the development of glycosidase mimetics is of great importance. We have designed and synthesized an enzyme mimetic containing l -phenylalanine, α-aminoisobutyric acid (Aib), l -leucine, and m-Nifedipine. From X-ray crystallography, the foldamer adopts a β-hairpin conformation stabilized by two 10-member and one 18-member NH⋅⋅⋅O=C hydrogen bonds. Moreover, the foldamer was found to be highly efficient in hydrolysing ethers and glycosides in the presence of iodine at room temperature. Further, X-ray analysis shows the backbone conformation of the enzyme mimetic to be almost unchanged after the glycosidase reaction. This is the first example of iodine-supported artificial glycosidase activity with an enzyme mimic at ambient conditions.     

Hydraulic resistance of rigid polyurethane foams. I. Effect of different surfactants on foam structure and properties

Foams used in buoyancy applications must resist penetration by water at significant depths of immersion. The behavior of water blown rigid polyurethane foam at different water pressures from 0 to 3 MPa are studied in this work. The effects of different surfactants on the cell structure and hydraulic resistance of the foams are examined. The foams have densities in the range of 145 to 160 kg/m³. With increasing applied hydraulic pressure, it is found that the foams have very small buoyancy losses at low pressures but beyond a threshold pressure, buoyancy losses increase rapidly. The threshold pressures of the foams increase with decrease in cell window area. A cell window is the lamella of the foam material that separates two adjacent cells. The cell sizes of the foam are found to correlate with the size of the air bubbles entrained during initial mixing. Surfactants, which reduce the surface tension of the polyol to the greatest extent, are found to give the finest initial bubbles, smaller cells, and foams with the highest hydraulic resistance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2821–2829, 2004     

Study of autocorrelation function of polymer and polymer–nanocomposite solutions using dynamic light scattering method

Dynamic light scattering (DLS) of polymer and polymer–nanocomposite solutions has been performed to examine the effect in the morphology of polymer solution in presence of nanoparticles analyzing their correlation functions. The size of the nanoparticle was determined using UV–Vis absorption spectroscopy measurements. Analysis of the correlation functions of polymer solution shows existence of two modes, namely, fast and slow modes, along with the distinct values in their corresponding amplitudes and relaxation times. Interestingly, the fast mode of the solution was found to smear out, enhancing the slow mode when we grow nanoparticles into the polymer solution. Apart from the above study, the temperature variation study of both the solutions show that above and below room temperature, the polymer solution becomes more heterogeneous compared to the solution when nanoparticles are grown into it.     

Enhanced Activation Energy of Crystallization of Pure Zirconia Nanopowders Prepared via an Efficient Way of Synthesis Using NaBH4

An efficient way through borohydride synthesis route using NaBH₄ was performed to prepare pure zirconia nanopowders via three different conditions such as gelation, precipitation, and constant pH. Zirconia powders prepared through constant pH route show highest activation energy of crystallization (E_a = 260 kJ/mol) or higher exothermic peak temperature (717°C), when compared with gelation or precipitation route due to its controlled growth of smaller crystallites. The released huge amount of H₂ gas bubbles during borohydride synthesis via constant pH route play a major role for formation of loose smaller crystallites and thus enhances the activation energy of crystallization of pure zirconia. So, the as‐prepared zirconia powders prepared through constant pH route remain amorphous up to 600°C and pure t‐ZrO₂ (~20 nm) was stable up to 800°C.     

Influence of Film Casting Condition and Thermal Treatment on Order Structure of Polyurethane Block Copolymer

An attempt has been made to investigate the influence of film casting temperature and thermal ageing on order structure formation of segmented polyurethane (SPU) block copolymer. For this purpose films were casted at three different temperature of 60, 80, or 100°C and thermal aged at 100, 120, 130, or 150°C. The structure of films were investigated by Fourier-transform infrared (FT-IR), wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). Film casted at slow solvent evaporation has more regular structure than the film casted at rapid solvent evaporation. Crystaline structure decreases with increase in casting temperature due to chain entanglement, which makes crystallization process tougher. The effect of ageing temperature on crystalline structure formation remains unclear. Decrease of ordered structure was observed when the samples were heat treated at 100 or 120°C, however, slight increase of ordered structures were observed for the samples heat treated at 130 or 150°C. Therefore, the influence of thermal ageing has been explained in terms of order-disorder temperature of block copolymer.     

Mixing characteristics for the single and air-water two-phase flows in miniaturized parallel multichannel-based devices

Investigation on the miniaturized parallel multichannel-based devices packed with glass beads to improve the mass exchange execution is the critical focal point of the current study. One of the essential parameters to specify the miniaturized devices' flow distribution is the residence time distribution (RTD). In the present context, the RTDs of a liquid tracer were investigated for the air-water multiphase flows (concurrent) across the multichannel-based miniaturized devices (comprising of 11 similar dimensional parallel channels). The devices were variable in height and packed with glass beads. The conductivity estimations generated the RTD curves and were addressed by the axial dispersion model (ADM). The fluid-flow rates differed within the range of 5–23 ml min⁻¹. The axial dispersion coefficients and the rate of the specific energy dispersion were investigated. The effects of pressure difference and geometry on the hydrodynamic attributes and mixing properties were well-illustrated, and the new correlations were suggested.