Palyno‐morphological characteristics of gymnosperm flora of pakistan and its taxonomic implications with LM and SEM methods

The present study is intended to assess gymnosperms pollen flora of Pakistan using Light Microscope (LM) and Scanning Electron Microscopy (SEM) for its taxonomic significance in identification of gymnosperms. Pollens of 35 gymnosperm species (12 genera and five families) were collected from its various distributional sites of gymnosperms in Pakistan. LM and SEM were used to investigate different palyno‐morphological characteristics. Five pollen types (i.e., Inaperturate, Monolete, Monoporate, Vesiculate‐bisaccate and Polyplicate) were observed. Six In equatorial view seven types of pollens were observed, in which ten species were sub‐angular, nine species were Traingular, six species were Perprolate, three species were Rhomboidal, three species were semi‐angular, two species were rectangular and two species were prolate. While five types of pollen were observed in polar view, in which ten species were Spheroidal, nine species were Angular, eight were Interlobate, six species were Circular, two species were Elliptic. Eighteen species has rugulate and 17 species has faveolate ornamentation. Eighteen species has verrucate and 17 have gemmate type sculpturing. The data was analysed through cluster analysis. The study showed that these palyno‐morphological features have significance value in classification and identification of gymnosperms. Based on these different palyno‐morphological features, a taxonomic key was proposed for the accurate and fast identifications of gymnosperms from Pakistan.     

Buckling of laminated sandwich plates subjected to partial edge compression

The buckling characteristics of sandwich plates having laminated stiff layers are studied for different types of partial edge loadings using a refined plate theory. With this plate theory, the through thickness variation of transverse shear stresses is represented by piecewise parabolic functions where the continuity of these stresses is satisfied at the layer interfaces by taking jumps in the transverse shear strains at the interfaces. The transverse shear stresses free condition at the plate top and bottom surfaces is also satisfied. It is quite interesting to note that this plate model having all these refined features requires unknown parameters only at the reference plane. To have a generality in the present analysis, finite element technique is adopted and it is carried out with newly developed triangular element, as existing finite elements cannot accommodate this plate model. So far, no solution exists in the literature for the problem of sandwich plate subjected to partial edge loading. The present analysis is first validated for the case of an isotropic plate subjected to partial edge compression and then it is extended to analyze sandwich plates. Few results are presented.     

Way forward in meeting energy challenges in Pakistan

In this review the energy potential of Pakistan from hydro, coal, wind, solar and nuclear sources has been discussed. The new projects that are being commissioned on coal, wind, solar, hydel and nuclear-based technologies have also been mentioned. The review has also explored the future prospects of the country’s energy requirements. Pakistan has potential to produce 100,000?MW of electricity from Thar coal for 20 years, 56,000?MW of hydroelectricity, 150,000?MW of wind energy and ～50,000?MW from solar sources. The coal-fired power generation is expected to 11,500?MW in period 2017–2019. The country is moving in the right direction to cater its energy needs. However, there is a need to find local and foreign investment in the country to meet high energy demands in the country in future.     

Buckling and dynamic instability analysis of stiffened shell panels

The static and dynamic instability characteristics of stiffened shell panels subjected to uniform in-plane harmonic edge loading are investigated in this paper. The eight-noded isoparametric degenerated shell element and a compatible three-noded curved beam element are used to model the shell panels and the stiffeners, respectively. As the usual formulation of degenerated beam element is found to overestimate the torsional rigidity, an attempt has been made to reformulate it in an efficient manner. Moreover, the new formulation for the beam element requires five degrees of freedom per node as that of shell element. The method of Hill's infinite determinant is applied to analyze the dynamic instability regions. Numerical results are presented through convergence and comparison with the published results from the literature. The effect of various parameters like shell geometry, stiffening scheme, static and dynamic load factors, stiffener size and position, and boundary conditions are considered in buckling and dynamic instability analysis of stiffened panels subjected to uniform in-plane harmonic loads along the boundaries.     

Physiochemical characterizations of hydroxyapatite extracted from bovine bones by three different methods: Extraction of biologically desirable HAp

In the present study, subcritical water and alkaline hydrolysis methods are proposed methodologies for extraction of natural hydroxyapatite bioceramic from bovine bone. In these processes, the bovine bones powder were treated by high pressure water at 250 °C for 1 h and 25% (wt) sodium hydroxide at 250 °C for 5 h, respectively. Also the conventional calcination methodology has been utilized as well (T = 850 °C for 1 h). The obtained apatites from the three treatment processes have been characterized by powder X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FT IR), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), electron scanning microscopy (SEM), energy dispersive X-ray analysis (EDX) and field emission scanning electron microscopy (FE SEM). FT IR and XRD results affirmed that both the proposed methods and the traditional one can eliminate the collagen and other organic materials present in the bovine bones. The physiochemical characterizations for the obtained apatites have proved that the subcritical water and the alkaline hydrolysis relatively preserve the carbonate content present in the biological apatite, so they yield carbonated hydroxyapatite which is medically preferable. While, the thermal process produces almost hydroxyapatite carbonate-free.     

Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites

Utilizing the extra-ordinary properties of carbon nanotube (CNT) in metal matrix composite (MMC) for macroscopic applications is still a big challenge for science and technology. Very few successful attempts have been made for commercial applications due to the difficulties incorporating CNTs in metals with up-scalable processes. CNT reinforced copper and copper alloy (bronze) composites have been fabricated by well-established hot-press sintering method of powder metallurgy. The parameters of CNT–metal powder mixing and hot-press sintering have been optimized and the matrix materials of the mixed powders and composites have been evaluated. However, the effect of shape and size of metal particles as well as selection of carbon nanotubes has significant influence on the mechanical and electrical properties of the composites. The hardness of copper matrix composite has improved up to 47% compared to that of pure copper, while the electrical conductivity of bronze composite has improved up to 20% compared to that of the pure alloy. Thus carbon nanotube can improve the mechanical properties of highly-conductive low-strength copper metals, whereas in low-conductivity high-strength copper alloys the electrical conductivity can be improved.     

Simple and Sensitive HPLC Method with Fluorescence Detection for the Measurement of Ibuprofen in Rat Plasma: Application to a Long-Lasting Dosage Form

A simple and sensitive high-performance liquid chromatography (HPLC) assay applied to the measurement of ibuprofen in rat plasma has been developed. Two parameters have been investigated to improve ibuprofen detectability using fluorescence detection: variation of mobile phase pH and the use of β-cyclodextrin (β-CD). Increasing the pH value from 2.5 to 6.5 and adding 5 mM β-CD enhanced the fluorescence signal (λ_exc = 224 nm; λ_em = 290 nm) by 2.5 and 1.3-fold, respectively, when using standards. In the case of plasma samples, only pH variation significantly lowered detection and quantification limits, down to 10 and 35 ng/mL, respectively. Full selectivity was obtained with a single step for plasma treatment, that is, protein precipitation with acidified acetonitrile. The validated method was applied to a pharmacokinetic study of ibuprofen encapsulated in microspheres and subcutaneously administered to rats.     

VARIATION OF PRESSURE WITH RAM SPEED AND DIE PROFILE IN HOT EXTRUSION OF ALUMINUM-6063

Prediction of extrusion pressure, especially in the case of complex die geometries, is an area of continued research interest. Die complexity, usually defined by “shape factor” (the ratio of the perimeter to the cross-sectional area of the profile), critically affects the flow of metal and the pressure required to extrude a given product. Applied strain rate (related directly to the ram speed of the extrusion press) also alters the product quality significantly. The current paper presents results of an ongoing study about effects of ram speed and die profile on extrusion pressure. Experiments were conducted using dies of different complexity to track the effects of ram speed variation and changing die profiles on extrusion pressure. Al-6063, the most popular commercial variety of structural aluminum, was used as the billet material for all experiments.     

Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO     

Analysis of Silver Nanoparticles in Engine Oil: Atangana–Baleanu Fractional Model

The present article aims to examine the heat and mass distribution in a free convection flow of electrically conducted, generalized Jeffrey nanofluid in a heated rotatory system. The flow analysis is considered in the presence of thermal radiation and the transverse magnetic field of strength B₀. The medium is porous accepting generalized Darcy’s law. The motion of the fluid is due to the cosine oscillations of the plate. Nanofluid has been formed by the uniform dispersing of the Silver nanoparticles in regular engine oil. The problem has been modeled in the form of classical partial differential equations and then generalized by replacing time derivative with Atangana–Baleanu (AB) time-fractional derivative. Upon taking the Laplace transform technique (LTT) and using physical boundary conditions, exact expressions have been obtained for momentum, energy, and concentration distributions. The impact of a number of parameters on fluid flow is shown graphically. The numerical tables have been computed for variation in the rate of heat and mass transfer with respect to rooted parameters. Finally, the classical solution is recovered by taking the fractional parameter approaching unity. It is worth noting that by adding silver nanoparticles in regular engine oil, its heat transfer rate increased by 14.59%, which will improve the life and workability of the engine.