飞机防冰控制器测试系统的设计

本设计基于模拟测试技术和计算机控制技术,介绍了飞机防冰控制器测试系统的软件和硬件电路。本系统采用QT作为软件开发平台,STM32F103ZET6为硬件控制器,使用RS485作为通信方式来实现飞机防冰控制器的自动测试、实时分析、故障排除等功能。     

Efficient Terahertz Plasmonic Absorbers with V-Grooves Using Highly Doped Silicon Substrate and Simple Wet-Etching Techniques

We experimentally demonstrate that at terahertz frequencies perfect plasmonic absorbers made from a 3D V-groove array in a highly doped silicon wafer can be easily realized using simple wet-etching process. The surface plasmon modes can be excited by the V-groove array and get decayed when they propagate along the silicon surface and enter the grooves, inducing a broadband near-zero dip in the reflection spectra. The reflection spectrum of the fabricated absorber is characterized using a terahertz time-domain spectroscopy system, and the experimental results are in good agreement with numerical simulations. The high performance including high absorptivity and large bandwidth together with the easy fabrication processes presented in this paper make this plasmonic absorber promising for a wide range of practical applications in terahertz regime.     

Nonlinear characteristics of on-chip spiral inductors under high RF power

This paper explores silicon CMOS on-chip spiral inductors performance degradation under high RF power. A novel methodology to calibrate and characterize on-chip spiral inductor with large signal inputs (high/medium power) is presented. Experiments showed 12% degradation of quality factor in a particular inductor design when 34 dBm RF power was applied. The degradation of quality factor of inductor can be attributed to a local self heating effect. Thermal imaging of such an inductor under high RF power validates the hypothesis.     

Honeypot game‐theoretical model for defending against APT attacks with limited resources in cyber‐physical systems

A cyber‐physical system (CPS) is a new mechanism controlled or monitored by computer algorithms that intertwine physical and software components. Advanced persistent threats (APTs) represent stealthy, powerful, and well‐funded attacks against CPSs; they integrate physical processes and have recently become an active research area. Existing offensive and defensive processes for APTs in CPSs are usually modeled by incomplete information game theory. However, honeypots, which are effective security vulnerability defense mechanisms, have not been widely adopted or modeled for defense against APT attacks in CPSs. In this study, a honeypot game‐theoretical model considering both low‐ and high‐interaction modes is used to investigate the offensive and defensive interactions, so that defensive strategies against APTs can be optimized. In this model, human analysis and honeypot allocation costs are introduced as limited resources. We prove the existence of Bayesian Nash equilibrium strategies and obtain the optimal defensive strategy under limited resources. Finally, numerical simulations demonstrate that the proposed method is effective in obtaining the optimal defensive effect.     

基于STM32的传感器接口模块的设计

基于STM32实现了电流型、电压型以及数字IO型传感器接口模块;进行了接口模块的软件设计,说明了详细的固件代码设计.除传统串口外,提供以太网接口,嵌入UDP协议,提供后期开发的便利接口.     

Effects of Double Substitution with Ge and Te on Thermoelectric Properties of a Skutterudite Compound

Studies have shown that the thermoelectric properties of CoSb₃ could be improved by the substitution of group IVB or VIB elements for Sb. However, the substitution volume is limited. To get a better picture of the substitution volume in view of thermoelectric properties, Ge and Te double-substituted skutterudite materials were prepared with the nominal composition of Co₄Sb _x Ge_5.9−0.5x Te_6.1−0.5x (x = 11, 10, 9, 8) by the traditional solid-state reaction method and spark plasma sintering, and Rietveld analysis was employed to refine the crystal structure. The results showed that the lattice parameter decreased linearly and the solubility limitations of group IVB and VIB elements were greatly alleviated by the Ge and Te codoping. Besides, the thermoelectric properties were analyzed through measurements of electrical and thermal conductivities as well as room-temperature electrical transport properties. The results showed that the substitution volume of Ge and Te could play an important role in the thermoelectric properties, and a minimum lattice thermal conductivity value of 1.56 W m⁻¹ K⁻¹ was obtained at around 673 K for Co₄Sb₈Ge_1.9Te_2.1. Co₄Sb₁₁Ge_0.4Te_0.6 achieved the best figure of merit of 0.89 at around 773 K, which was remarkably improved over that of untreated CoSb₃.     

Eradication of Multidrug‐Resistant Staphylococcal Infections by Light‐Activatable Micellar Nanocarriers in a Murine Model

Bacterial infections are mostly due to bacteria in their biofilm mode‐of‐growth, making them recalcitrant to antibiotic penetration. In addition, the number of bacterial strains intrinsically resistant to available antibiotics is alarmingly growing. This study reports that micellar nanocarriers with a poly(ethylene glycol) shell fully penetrate staphylococcal biofilms due to their biological invisibility. However, when the shell is complemented with poly(β‐amino ester), these mixed‐shell micelles become positively charged in the low pH environment of a biofilm, allowing not only their penetration but also their accumulation in biofilms without being washed out, as do single‐shell micelles lacking the pH‐adaptive feature. Accordingly, bacterial killing of multidrug resistant staphylococcal biofilms exposed to protoporphyrin IX‐loaded mixed‐shell micelles and after light‐activation is superior compared with single‐shell micelles. Subcutaneous infections in mice, induced with vancomycin‐resistant, bioluminescent staphylococci can be eradicated by daily injection of photoactivatable protoporphyrin IX‐loaded, mixed‐shell micelles in the bloodstream and light‐activation at the infected site. Micelles, which are not degraded by bacterial enzymes in the biofilm, are degraded in the liver and spleen and cleared from the body through the kidneys. Thus, adaptive micellar nanocarriers loaded with light‐activatable antimicrobials constitute a much‐needed alternative to current antibiotic therapies.     

同频干扰智能预判系统设计研究

运营商4G/5G网络共用2.6 GHz频段,随着5G基站入网,同频干扰问题随之出现.本文提出了一种可进行同频干扰智能预判的系统,该系统可在频点调整前进行同频干扰的风险预判,以便于及时规避风险,研究分析和测试验证表明,该系统的输出结果有助于同频干扰小区的识别,快速判定同频干扰风险小区,提升优化效率,确保用户感知.     

High power λ～8.5 μm quantum cascade laser grown by MOCVD operating continuous-wave up to 408 K

Robust quantum cascade laser(QCL)enduring high temperature continuous-wave(CW)operation is of critical import-ance for some applications.We report on the realization of lattice-matched InGaAs/lnAIAs/InP QCL materials grown by metal-organic chemical vapor deposition(MOCVD).High interface quality structures designed for light emission at 8.5μmare achieved by optimizing and precise controlling of growth conditions.A CW output power of 1.04 W at 288 K was obtained from a 4 mm-long and 10 μm-wide coated laser.Corresponding maximum wall-plug efficiency and threshold current density were 7.1％and 1.18 kA/cm2,respectively.The device can operate in CW mode up to 408 K with an output power of 160 mW.     

Development of linear traveling wave tubes for telecommunicationsapplications

Traveling wave tubes (TWTs) designed for telecommunications applications in multichannel power amplifiers (MCPAs) are required to have high linearity, low intermodulation distortion, high efficiency and high power outputs. The linearity of the TWT can be greatly improved by operation of the tube significantly backed off from saturation and by optimization of the design of the helix circuit. This results in two tone intermodulation products that are 25 to 40 dB below the carrier level, depending on the amount of back-off selected. However, operation backed off from saturation results in a greatly reduced efficiency of the TWT, which must be compensated for by optimal circuit and collector design. Several L-band and S-band Hughes TWTs have been developed for telecommunications applications and feature saturated power levels of up to 2 kW and average power of over 600 W with overall efficiencies of over 20% at 10 dB back-off and 40% at 6 dB back-off. These tubes provide high average power, high efficiency amplification with modest size and reduced cooling requirements compared to solid state amplifiers