大功率半导体激光列阵单光纤耦合技术

利用阶梯反射镜整形技术和偏振合束及波长合束技术成功将两只波长为808nm和两只波长为980nm的40W大功率半导体激光器光束进行混合,最后得到输出功率为95.8W、耦合效率为60%的双波长大功率半导体激光列阵单光纤耦合模块,光纤芯径为400μm,数值孔径为0.22.     

Self‐Assembled In‐Plane Growth of Mg2SiO4 Nanowires on Si Substrates Catalyzed by Au Nanoparticles

In‐plane growth of Mg₂SiO₄ nanowires on Si substrates is achieved by using a vapor transport method with Au nanoparticles as catalyst. The self‐assembly of the as‐grown nanowires shows dependence on the substrate orientation, i.e., they are along one, two, and three particular directions on Si (110), (100), and (111) substrates, respectively. Detailed electron microscopy studies suggest that the Si substrates participate in the formation of Mg₂SiO₄, and the epitaxial growth of the nanowires is confined along the Si <110> directions. This synthesis route is quite reliable, and the dimensions of the Mg₂SiO₄ nanowires can be well controlled by the experiment parameters. Furthermore, using these nanowires, a lithography‐free method is demonstrated to fabricate nanowalls on Si substrates by controlled chemical etching. The Au nanoparticle catalyzed in‐plane epitaxial growth of the Mg₂SiO₄ nanowires hinges on the intimate interactions between substrates, nanoparticles, and nanowires, and our study may help to advance the developments of novel nanomaterials and functional nanodevices.     

Aqueous solution-processed MoO3 as an effective interfacial layer in polymer/fullerene based organic solar cells

The authors demonstrate an effective anode interfacial layer based on aqueous solution-processed MoO₃ (sMoO₃) in poly (3-hexylthiophene) (P3HT) and indene-C60 bisadduct (ICBA) based bulk-heterojunction organic solar cells (PSCs). Various sMoO₃ concentration (0.03–0.25 wt%) was obtained by dissolving MoO₃ powder into deionized water directly with weak solubility. The characteristics of sMoO₃ films evaluated by atomic force microscope (AFM) and scanning electron microscope (SEM) suggest that the sMoO₃ films continuously cover the entire indium tin oxide (ITO) surface. The sMoO₃ based PSCs exhibit comparable power conversion efficiency with poly (3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT:PSS) based devices. However, even more importantly, the stability of sMoO₃ based devices have been greatly improved in air under continual light-illumination at 52 mW/cm². Further evaluations on Mo valence states and work function of sMoO₃ films by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS) demonstrate that the aqueous solution-processed MoO₃ could act as an better anode interfacial layer than the conventional PEDOT:PSS.     

栀子黄色素的分离与提纯

本文报道了用树脂吸附法纯化从栀子果实中提取出藏花素类色素的方法。用大孔吸附剂对栀子黄进行柱层析分离，得到了纯度较高的栀子黄，色价达１７２。     

台区降损主要的管理和技术措施

降损工作是提高供电企业经营效益必不可少的重要环节之一,也是体现企业管理水平高低的分水岭。本文着重阐述台区线损异常的主要原因,切实可行地提出一些降损的手段和方法。近几年重点负责线损管理工作,取得了一定成效,在2012年12月之前,台区线损异常率在20-30%之间浮动,经过系列整改后,到2013年5月,异常率下降到8-10%之间,达到上级线损要求,从中也总结了自己在线损管理方面的一些经验和做法。     

用于大时滞系统的自调谐模糊调节器研究

分析了一般自调谐模糊控制器的优点，指出了它在大时滞系统中存在的问题。从人工控制经验出发，应用智能控制原理，提出了一种改进型自调谐模糊控制器模型，并将其应用于电炉温度控制中，文中给出了实验结果，并作了对比分析，证明改进型自调谐控制器具有较好的鲁棒性，能有力地改善系统性能，对大时滞系统的控制有实用价值。     

On the capacity of network coding for random networks

We study the maximum flow possible between a single-source and multiple terminals in a weighted random graph (modeling a wired network) and a weighted random geometric graph (modeling an ad-hoc wireless network) using network coding. For the weighted random graph model, we show that the network coding capacity concentrates around the expected number of nearest neighbors of the source and the terminals. Specifically, for a network with a single source, l terminals, and n relay nodes such that the link capacities between any two nodes is independent and identically distributed (i.i.d.) /spl sim/X, the maximum flow between the source and the terminals is approximately nE[X] with high probability. For the weighted random geometric graph model where two nodes are connected if they are within a certain distance of each other we show that with high probability the network coding capacity is greater than or equal to the expected number of nearest neighbors of the node with the least coverage area.     

A low power Gm-C filter with on-chip automatic tuning for a WLAN transceiver

正A sixth-order Butterworth Gm-C low-pass filter(LPF) with a continuous tuning architecture has been implemented for a wireless LAN(WLAN) transceiver in 0.35μm CMOS technology.An interior node scaling technique has been applied directly to the LPF to improve the dynamic range and the structure of the LPF has been optimized to reduce both the die size and the current consumption.Measurement results show that the filter has 77.5 dB dynamic range,16.3 ns group delay variation,better than 3%cutoff frequency accuracy,and 0 dBm passband IIP3.The whole LPF with the tuning circuit dissipates only 1.42 mA(5 MHz cutoff frequency) or 2.81 mA(10 MHz cutoff frequency) from 2.85 V supply voltage,and only occupies 0.175 mm~2 die size.     

Characterization of Sub-THz Photonic-Transmitters Based on GaAs–AlGaAs Uni-Traveling-Carrier Photodiodes and Substrate-Removed Broadband Antennas for Impulse-Radio Communication

A novel photonic transmitter for wireless terahertz (THz) impulse-radio (IR) communication is realized by monolithic integration of a GaAs-AlGaAs-based uni-traveling-carrier (UTC) photodiode with a substrate-removed broadband antenna. The device can radiate strong sub-THz pulses (20-mW peak-power) with a narrow pulsewidth (<2 ps) and wide bandwidth (100 ~ 250 GHz). The maximum average power emitted by our device, under the same THz time-domain spectroscopic setup, is around ten times higher than that of the low-temperature-grown GaAs-based photoconductive antenna, while with a much lower dc bias (9 versus 35 V). The bias-dependent peak output powers of our devices suggest their suitability for application as a data modulator/emitter for photonic THz IR communication.