液相色谱法测定水中苯丙[a]芘的不确定度评估

对液相色谱法测定生活饮用水中苯丙[a]芘含量测量不确定度进行分析,为评价检测数据的准确性提供科学依据。测样量为1m L时,测定生活饮用水中苯丙[a]芘含量为ρ=(0.856+0.025)μg·m L-1。通过对不确定度来源的量化分析,得出标准物质引入的不确定度分量和线性误差引入的不确定度分量是测定结果不确定度的重要来源。     

Mechanical Properties and Interlaminar Fracture Toughness of Glass‐Fiber‐Reinforced Epoxy Composites Embedded with Shape Memory Alloy Wires

The effects of the content and position of shape memory alloy (SMA) wires on the mechanical properties and interlaminar fracture toughness of glass‐fiber‐reinforced epoxy (GF/epoxy) composite laminates are investigated. For this purpose, varying numbers of SMA wires are embedded in GF/epoxy composite laminates in different stacking sequences. The specimens are prepared by vacuum‐assisted resin infusion (VARI) processing and are subjected to static tensile and three‐point‐bending tests. The results show that specimens with two SMA wires in the stacking sequence of [GF₂/SMA/GF₁/SMA/GF₂] and four SMA wires in the stacking sequence of [GF₄/SMA/GF₂/SMA/GF₄] exhibit optimal performance. The flexural strength of the optimal four‐SMA‐wire composite is lower than that of the pure GF/epoxy composite by 5.76% on average, and the flexural modulus is improved by 5.19%. Mode‐I and II interlaminar fracture toughness tests using the SMA/GF/epoxy composite laminates in the stacking sequence of [GF₄/SMA/GF₂/SMA/GF₄] are conducted to evaluate the mechanism responsible for decreasing the mechanical properties. Scanning electron microscopy (SEM) observations reveal that the main damage modes are matrix delamination, interfacial debonding, and fiber pullout.

     

Engineering High‐Performance MoO2‐Based Nanomaterials with Supercapacity and Superhydrophobicity by Tuning the Raw Materials Source

Herein, a simple self‐assembly method is proposed for the fabrication of MoO₂‐based superhydrophobic material with record high contact angles (contact angle up to about 173°) for conductive metal oxides on hard/soft substrates. The spin‐coated surface demonstrates excellent oil–water separation efficiency (>98%) after 50 cycles and robust corrosion resistance after immersion into different pH solutions for 20 d. These water‐resistant coatings retain excellent superhydrophobicity after oil immersion, knife‐scratch, and long‐cycle sandpaper abrasion, which is not observed on most artificial surfaces. Meanwhile, the functionality switching from superhydrophobicity to supercapacity, which have an inverse relationship in aqueous solutions because of poor electrode wettability, is achieved simply by editing the raw materials source. Tuning of the raw materials leads to the same product MoO₂/graphitic carbon with different morphologies and functionalities. Different from superhydrophobic MoO₂/carbon ball flowers, MoO₂ nanotubes with carbon exhibit excellent supercapacity with a large gravimetric capacitance and great cycling stability.     

Endoplasmic Reticulum–Targeted Fluorescent Nanodot with Large Stokes Shift for Vesicular Transport Monitoring and Long‐Term Bioimaging

Herein, a highly stable aggregation‐induced emission (AIE) fluorescent nanodot assembled by an amphiphilic quinoxalinone derivative‐peptide conjugate, namely Quino‐1‐Fmoc‐RACR (also termed as Q1‐PEP), which exhibits large Stokes shift and an endoplasmic reticulum (ER)‐targeting capacity for bioimaging is reported. It is found that the resulting nanodot can effectively enter the ER with high fluorescent emission. As the ER is mainly involved in the transport of synthesized proteins in vesicles to the Golgi or lysosomes, the Q1‐PEP nanodot with ER‐targeting capacity can be used to monitor vesicular transport inside the cells. Compared to conventional fluorescent dyes with small Stokes shifts, the self‐assembled fluorescent nanodot shows superior resistance to photobleaching and aggregation‐induced fluorescence quenching, and elimination of the spectra overlap with autofluorescence of biosubstrate owning to their AIE‐active and red fluorescence emission characteristics. All these optical properties make the fluorescent nanodot suitable for noninvasive and long‐term imaging both in vitro and in vivo.     

Modulating the Surface State of SiC to Control Carrier Transport in Graphene/SiC

Silicon carbide (SiC) with epitaxial graphene (EG/SiC) shows a great potential in the applications of electronic and photoelectric devices. The performance of devices is primarily dependent on the interfacial heterojunction between graphene and SiC. Here, the band structure of the EG/SiC heterojunction is experimentally investigated by Kelvin probe force microscopy. The dependence of the barrier height at the EG/SiC heterojunction to the initial surface state of SiC is revealed. Both the barrier height and band bending tendency of the heterojunction can be modulated by controlling the surface state of SiC, leading to the tuned carrier transport behavior at the EG/SiC interface. The barrier height at the EG/SiC(000‐1) interface is almost ten times that of the EG/SiC(0001) interface. As a result, the amount of carrier transport at the EG/SiC(000‐1) interface is about ten times that of the EG/SiC(0001) interface. These results offer insights into the carrier transport behavior at the EG/SiC heterojunction by controlling the initial surface state of SiC, and this strategy can be extended in all devices with graphene as the top layer.     

Nanoconfined Nickel@Carbon Core–Shell Cocatalyst Promoting Highly Efficient Visible‐Light Photocatalytic H2 Production

The realization of large‐scale solar hydrogen (H₂) production relies on the development of high‐performance and low‐cost photocatalysts driven by sunlight. Recently, cocatalysts have demonstrated immense potential in enhancing the activity and stability of photocatalysts. Hence, the rational design of highly active and inexpensive cocatalysts is of great significance. Here, a facile method is reported to synthesize Ni@C core–shell nanoparticles as a highly active cocatalyst. After merging Ni@C cocatalyst with CdS nanorod (NR), a tremendously enhanced visible‐light photocatalytic H₂‐production performance of 76.1 mmol g^?1 h^?1 is achieved, accompanied with an outstanding quantum efficiency of 31.2% at 420 nm. The state‐of‐art characterizations (e.g., synchrotron‐based X‐ray absorption near edge structure) and theoretical calculations strongly support the presence of pronounced nanoconfinement effect in Ni@C core–shell nanoparticles, which leads to controlled Ni core size, intimate interfacial contact and rapid charge transfer, optimized electronic structure, and protection against chemical corrosion. Hence, the combination of nanoconfined Ni@C with CdS nanorod leads to significantly improved photocatalytic activity and stability. This work not only for the first time demonstrates the great potential of using highly active and inexpensive Ni@C core–shell structure to replace expensive Pt in photocatalysis but also opens new avenues for synthesizing cocatalyst/photocatalyst hybridized systems with excellent performance by introducing nanoconfinement effect.     

Progress in additive manufacturing on new materials: A review

Recent efforts and advances in additive manufacturing (AM) on different types of new materials are presented and reviewed. Special attention is paid to the material design of cladding layers, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the AM process, and the resulted microstructures and properties, as well as the relationship between these factors. Thereafter, the trend of development in the future is forecasted, including: Effects of the particles size and size distribution of powders; Approaches for producing fine microstructures; Opportunities for creating new materials by AM; Wide applications in reconditioning of damaged components; Challenges for deep understanding and applications of the AMed new materials. The idea of “Develop Materials” or “Create Materials” by AM is highlighted, but a series of scientific, technological and engineering problems remain to be solved in future.     

Solvent-dependent evolution of cyclic penta-twinned rhodium icosahedral nanocrystals and their enhanced catalytic properties

Cyclic penta-twinned noble metal nanocrystals exhibit promising properties due to their unique geometric and electronic structures. However, the controlled synthesis of cyclic penta-twinned nanostructures, especially of noble metals with a high cohesive energy (e.g., Rh), is very difficult, and the corresponding growth mechanism is not fully understood. Herein, we report a facile one-pot hydrothermal approach for the synthesis of cyclic penta-twinned Rh icosahedral nanocrystals. It was found that apart from regulating the surface free energy by changing the concentration or category of the capping agents, the solvent might influence the adsorption ability of the surfactant on the Rh crystal surface, which results in a change in the surface free energy and thus allows the formation of Rh cyclic penta-twinned nanostructures. In addition, due to their unique electronic and geometric structures, the Rh icosahedral nanocrystals exhibit superior catalytic activity and stability for the electrooxidation of ethanol as compared to single-crystal Rh tetrahedral nanocrystals and commercial Rh black.

Open image in new window

     

Biomedical applications of mRNA nanomedicine

As an attractive alternative to plasmid DNA, messenger RNA (mRNA) has recently emerged as a promising class of nucleic acid therapeutics for biomedical applications. Advances in addressing the inherent shortcomings of mRNA and in the development of nanoparticle-based delivery systems have prompted the development and clinical translation of mRNA-based medicines. In this review, we discuss the chemical modification strategies of mRNA to improve its stability, minimize immune responses, and enhance translational efficacy. We also highlight recent progress in nanoparticle-based mRNA delivery. Considerable attention is given to the increasingly widespread applications of mRNA nanomedicine in the biomedical fields of vaccination, protein-replacement therapy, gene editing, and cellular reprogramming and engineering.