高非线性光纤及其应用

介绍了各种高非线性光纤的原理，并对其在超连续（SC）脉冲的产生和波长变换上的应用作了讨论。     

宣汉——达县地区飞仙关组储层预测方法研究

在宣汉-达县地区,以往仅依据地震属性来预测飞仙关组储层分布,钻探结果与实际情况不符,为此本文提出量化分析预测结合主参数分析的新方法和新思路。在量化分析中首先对飞仙关组储层进行高分辨率反演,获得储能系数图;然后结合主振幅剖面和主频率剖面分析,对储层进行预测。在研究区,本方法的预测结果与实钻情况相吻合。     

工艺空气压缩机组开车过程的思考

通过汽轮机组调速系统伺服马达不复位、主汽门不动作，反推出电磁阀控制线路接线错误，用人为短路压力开关等手段判断出组合油脱扣器活塞卡涩是造成现场延误开车的根本原因，提出完善大机组开车工作票制度、提高人员素质等措施。     

High power mid-infrared optically pumped PbSe/PbSrSe multiple-quantum-well vertical-cavity surface-emitting laser operation at 325 K

A high power, mid-infrared (/spl lambda/=3.8 /spl mu/m) lead-salt vertical-cavity surface-emitting laser (VCSEL) operating at 325 K is demonstrated. The laser emission is generated in a half-wavelength microcavity consisting of seven pairs of PbSe/PbSrSe multiple-quantum-wells embedded in two mirrors and optically pumped with 5 ns laser pulses.     

永州市抗御"碧利斯"台风的实践与思考

受2006年第四号台风“碧利斯”的影响,永州市出现了持续的强降雨过程,部分地区出现了大暴雨,引发了严重的洪涝灾害,成为近年来影响较为严重的一次台风暴雨。永州市在抗御这次台风暴雨过程中,高度警惕,充分准备,周密部署,科学调度,全力以赴抗灾救灾,将灾害损失降到了最低程度,全市没有垮一库一坝,没有因山洪灾害发生人员伤亡。文章总结了永州市的防灾抗灾经验,并针对防御台风暴雨存在的问题,探讨了进一步减轻台风暴雨灾害损失的对策。     

高沸石配比陶瓷纤维复合纸制备中助留剂的选择

考察了沸石复合纸板制备中助留剂对无机物留着的影响。结果表明,PDADMAC或A-PAM单元体系、PVAm/A-PAM二元助留体系的作用效果差,PDADMAC/A-PAM二元助留体系的留着效果显著,PDADMAC的相对分子质量对留着效果的影响不大,PDADMAC与A-PAM的电荷量比是决定无机物留着的主要因素,本研究的条件下,最佳正负电荷量比为3.0～5.0。     

Process and design analysis for ultrafine-pitched wiresweep elimination in advanced copper heat spreader BGA package

The semiconductor device trend for increasing functionalities and performances yet with smaller overall feature sizes presents escalating obstacles to the decreasing form factor along with demanding thermal carrying capability required at the package level. To confront this compounding issue, ultrafine-pitch wirebond interconnect coupled with thermally enhanced copper heat spreader attached to the package are introduced. However, the additional copper heat spreader thickness introduced within the package challenges the design of the package's wire, its loop height, and the molding process control to prevent wire sweeping occurrences. This study investigates the impact of different ultrafine pitched wire types, wire loop designs, copper heat spreader structures, and mold material types on eliminating device short from occurring due to the wire sweeping phenomena. A full factorial experiment is performed using an active silicon device packaged in a thermally enhanced ball grid array (BGA) test vehicle. In addition, test characterization is carried out using x-ray and multiinsertions hot/cold continuity tests. Then, a detailed failure analysis is performed by package decapsulation and scanning electron microscopy/energy-dispersive x-ray (SEM/EDX) to confirm the experimental findings. In conclusion, the study finds that for an ultrafine-pitched thermally enhanced BGA package, wire type is insignificant to reduce wire shorting occurrences. However, mold material and copper heat spreader structure using an optimized wire loop design are significant factors in eliminating wiresweep shorting phenomena. This study concludes with a wirebond interconnect and heat slug design recommended along with an improved process parameters and assembly material sets found from the experiment.     

间接原子吸收分光光度法测定聚丙烯、聚乙烯中的微量(?)

介绍用原子吸收分光光度法测定PE、PP氯含量。该方法采用氧气燃烧法处理样品,用Ag~+沉淀Cl~-,经分离后用原子吸收光谱测溶液中剩余Ag~+浓度,从而得到样品中氯含量。讨论了仪器参数、操作条件对测定结果的影响,结果表明,在分离前存放4～30分钟对测试结果无影响。火焰法的测定条件为波长328.1nm、灯电流7.5mA、狭缝宽度0.4nm、C_2H_2压力0.025MPa、空气压0.16MPa、燃烧器高度7.5mm。实验采用的离心转速2000r/min、时间5分钟、HNO_3浓度1%。该法灵敏度可达0.1μg/ml、相对标准误差<2%。