Adsorption Desalination Quenches Global Thirst

The search for fresh or potable water remains a pressing concern throughout many regions of the world. Although most of the Earth's surface is covered by oceans, the effort to provide for the world's inhabitants with fresh or potable water seems to be insurmountable; at least one billion people do not have access to clean and fresh water. The World Health Organization (WHO) reported that about 41% of the Earth's population lives in water-stressed areas, and the number of people in the water scarce regions may climb to 3.5 billion by the year 2025. Thus, innovative and cost-effective desalination technologies for producing fresh water are needed to provide practical solutions.     

Structural tuning of wide‐gap chalcopyrite CuGaSe2 thin films and highly efficient solar cells: differences from narrow‐gap Cu(In,Ga)Se2

Simultaneous realization of high values of open circuit voltage (V_oc), fill factor (FF), and energy conversion efficiency (η) in wide‐gap CuGaSe₂ (CGS) solar cells has long been one of the most challenging issues in the realm of chalcopyrite photovoltaics. In this communication, structural tuning of CGS thin films by means of controlling the amount of Se flux used during CGS film growth and improvements in solar cell performance (V_oc > 0.9 V, FF > 0.7, and η > 10%) are demonstrated. Systematic variations in CGS film properties with the Se flux and correlation with device properties are shown. The unique CGS thin‐film growth kinetics, which are different from narrow‐gap Cu(In,Ga)Se₂, are also presented and discussed. This development of double digit efficiency for CGS solar cells opens a new frontier for the broad application of a new class of chalcopyrite‐based devices. Copyright © 2014 John Wiley & Sons, Ltd.     

Improvement of bitumen-waste product in leachability—Leachability of bitumen product containing BWR's evaporator concentrate

The method has been developed to improve the bitumen product which incorporates an evaporator concentrate from a BWR, with respect to the swelling and leaching. The leachability of the product has been measured by the method recommended by the IAEA. The swelling of the product is successfully prevented by the addition of calcium chloride. The specimen containing the waste up to Wa/B (Weight ratio of Na₂SO₄ + CaCl₂ and bitumen) = 60:40 shows no pronounced swelling, when it is immersed in water. The cumulative fractions of ¹³⁷Cs and ⁶⁰Co leached from a specimen which does not contain CaCl₂ are 0.65 and 0.2 at the leaching time of 30 days. On the hand, the corresponding value at 100 days for the specimen with calcium chloride addition is 5 × 10^?4 for ¹³⁷Cs and 1 × 10^?4 for ⁶⁰Co. The coating of the specimen surface with a fresh bitumen (5 mm thickness) reduces the leachability further. These results indicate that this method is effective to improve the bitumen product incorporating BWR's evaporator concentrate.     

Post-irradiation studies on knock-out and pseudo-recoil releases of fission products from fissioning UO2

By using post-irradiation techniques, in-pile releases of ¹³³Xe, ^85mKr, ⁸⁸Kr, ⁸⁷Kr and ¹³⁸Xe from UO₂ fissioning at low temperatures below about 200° C are studied: these are analyzed into a time-dependent knock-out and time-independent pseudo-recoil releases. For the latter, a “self knock-out” mechanism is proposed: when a fission fragment loses thoroughly its energy near the UO₂ surface and stops there, it will knock out the surface substances and accordingly the fragment (i.e. the fission product) will be released. The effective thickness of the layer where the self knock-out occurs is found to be ~7Å. As for the knock-out release, the following is estimated from its dependence on various factors: the knock-out release of fission products occurs from the surface layer with the effective thickness of ~20Å: the shape of UO₂ matrix knocked out by one fission fragment passing through the surface is equivalent to a cylinder ~32Å diameter by ~27Å thick, (i.e. the knock-out coefficient for UO₂ is ~660 uranium atoms per knock-out event). On the basis of the above estimations, the conclusions derived from the past in-pile studies of fission gas releases are evaluated.     

基于三维人脸成像系统的复数域人脸识别方法

三维人脸识别是模式识别和人工智能领域的研究热点。提出了一种利用人脸图像的二维灰度信息和三维深度信息进行人脸识别的算法。首先利用相关型图像传感器构成三维实时人脸成像系统,并将获得的三维人脸物理数据用复数形式表达。再将特征脸（Eigenface）方法和Fisherface方法拓展到复数域,提出了复数域特征脸方法和复数域Fisherface方法。改进的复数域人脸识别方法在三维实时成像系统的人脸数据库中进行的人脸识别实验表明,复数域的三维人脸识别方法明显优于传统的人脸识别方法。     

Lightning protection of overhead power distribution lines

There are two major protective methods against lightning outages on overhead distribution lines. One is by use of surge arresters and the other is by an overhead ground wire. Surge arresters have rather constant effect regardless of the type of lightning outage causes. On the other hand, the effect of an overhead ground wire is quite different against the two major causes: direct lightning hit and induced overvoltages. This paper shows how to design lightning protection for overhead power distribution lines taking these characteristics into account. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Improvement of the contraction‐type LP test algorithm for finding all solutions of piecewise‐linear resistive circuits

In this letter, an effective technique is proposed for improving the computational efficiency of the contraction‐type LP test algorithm, which is an algorithm for finding all solutions of piecewise‐linear resistive circuits. Using the proposed technique, all solutions of a large‐scale problem, where the number of variables is 100 and the number of linear regions is 10¹⁰⁰, could be found in less than 10 min using a 360 MHz computer. Copyright 2001 John Wiley & Sons, Ltd.     

Adaptive set‐point regulation of discrete‐time nonlinear systems

In this paper, adaptive set‐point regulation controllers for discrete‐time nonlinear systems are constructed. The system to be controlled is assumed to have a parametric uncertainty, and an excitation signal is used in order to obtain the parameter estimate. The proposed controller belongs to the category of indirect adaptive controllers, and its construction is based on the policy of calculating the control input rather than that of obtaining a control law. The proposed method solves the adaptive set‐point regulation problem under the assumption that the target state is reachable for each fixed parameter value. Additional feature of the proposed method is that Lyapunov‐like functions have not been used in the construction of the controllers. Copyright © 2015 John Wiley & Sons, Ltd.     

Three-Stage Method for Selecting Informative Genes for Cancer Classification

Gene expression data produced by microarray machines are useful for cancer classification. However, the process of gene selection for the classification faces a major problem because of the properties of the data such as the small number of samples compared with the huge number of genes (high-dimensional data), irrelevant genes, and noisy data. Hence, this paper proposes a three-stage method to select a small subset of informative genes which is most relevant for the cancer classification. It has three stages: (i) pre-selecting genes using a filter method to produce a subset of genes; (ii) optimizing the gene subset using a multi-objective hybrid method to yield near-optimal subsets of genes; (iii) analyzing the frequency of appearance of each gene in the different near-optimal gene subsets to produce a small (final) subset of informative genes. Five gene expression data sets are used to test the effectiveness of the proposed method. Experimental results show that the performance of the proposed method is superior to other experimental methods and related previous works. A list of informative genes in the final gene subset is also presented for biological usage. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.