Moving pick‐up‐type contactless power transfer systems and their efficiency using series and parallel resonant capacitors

The equivalent circuit, the efficiency, and the important characteristics of moving pick‐up type contactless power transfer systems are described. If the primary series capacitor and the secondary parallel capacitors are chosen correctly and the winding resistances are ignored, the equivalent circuit of the transformer with these capacitors becomes the same as an ideal transformer at the resonant frequency. This simple approximation helps to understand the phenomena occurring with load changes. Because the circuit analysis becomes simple, the approximate value of the power transfer efficiency can be derived. This paper describes the determination of the capacitor values, the derivation of the equivalent circuit and the efficiency, and test results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(2): 47–54, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20970     

Influence of phosphate species on green rust I transformation and local structure and morphology of γ-FeOOH

To clarify the role of phosphate in the formation of corrosion products, the transformation of GRI(Cl⁻) with the addition of phosphate was characterized through XRD, TEM, and solution analysis. Electrochemical analysis showed that the transformation of GRI(Cl⁻) was delayed and the size of the final products, i.e., γ-FeOOH was reduced in the phosphate added case. X-ray absorption spectroscopy indicated that the neighboring Fe–Fe coordination number of FeO₆ octahedral unit in γ-FeOOH was decreased. These effects of phosphate are attributed to its adsorption on GRI(Cl⁻) and nucleated γ-FeOOH that prevented particle growth during oxidation process.     

Photocatalytic hydrogenation of acetophenone derivatives and diaryl ketones on polycrystalline titanium dioxide

In the absence of molecular oxygen, various aromatic ketones such as acetophenone derivatives and diaryl ketones were photocatalytically hydrogenated on polycrystalline titanium dioxide (Degussa P25) under UV light irradiation (> 340 nm). The desired secondary alcohols were obtained with excellent chemical efficiency (almost 100% yields for 10 examples) by choosing ethanol as a sacrificial hole scavenger, which was oxidized into acetaldehyde.     

A Computational Study of Thrust Vectoring Control Using Dual Throat Nozzle

Dual throat nozzle （DTN） is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios （NPR）. Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.     

Magnetization of superconducting tape in a perpendicular field

The magnetization of a V₃Ga superconducting tape between two successive flux jumps has been experimentally determined by means of search coil measurement in an increasing field perpendicular to the surface. On the basis of these experimental results, an attempt is made to determine theoretically the current induced region as a function of only one parameter across the width, in order to calculate approximately the magnetization.The influence of the superconductor temperature rise on the magnetization is also calculated. The comparison between measured and calculated magnetization shows good agreement except when the current induction front is very close to the tape edge at the beginning of the application of the field.     

Pulsed field loss characteristics of the Japanese test coil for the large coil task

This paper describes some results of an analytical calculation and the measurements of a pulsed field loss on the Japanese LCT conductor. The conductor, whose aspect ratio is around 2.5, is wound edge wise to reduce the pulsed field loss. The Japanese LCT coil, with the conductor thus designed, was evaluated to have a pulsed field loss of about 19W. This includes the loss of the helium vessel under the normal LCT test with a pulsed field of 0 to 0.14T. In addition, the loss measurement has been carried out up to 25 T/s. Measured results on the relation between the loss of a single strand and that of a whole strand pack well supports the validity of the loss analysis which includes a newly arranged set of analytical equations.     

Improvement of bitumen-waste product in leachability—Leachability of bitumen product containing BWR's evaporator concentrate

The method has been developed to improve the bitumen product which incorporates an evaporator concentrate from a BWR, with respect to the swelling and leaching. The leachability of the product has been measured by the method recommended by the IAEA. The swelling of the product is successfully prevented by the addition of calcium chloride. The specimen containing the waste up to Wa/B (Weight ratio of Na₂SO₄ + CaCl₂ and bitumen) = 60:40 shows no pronounced swelling, when it is immersed in water. The cumulative fractions of ¹³⁷Cs and ⁶⁰Co leached from a specimen which does not contain CaCl₂ are 0.65 and 0.2 at the leaching time of 30 days. On the hand, the corresponding value at 100 days for the specimen with calcium chloride addition is 5 × 10^?4 for ¹³⁷Cs and 1 × 10^?4 for ⁶⁰Co. The coating of the specimen surface with a fresh bitumen (5 mm thickness) reduces the leachability further. These results indicate that this method is effective to improve the bitumen product incorporating BWR's evaporator concentrate.