Mechanistic study of the reduction of copper oxides in alkaline solutions by electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy was used to study the mechanism by which copper oxides are reduced in alkaline solutions. For the reductions of CuO and Cu₂O, a capacitive loop and also an inductive loop under certain conditions were observed in the complex plane. The electrochemical impedance for CuO reduction was not greatly dependent on the solution alkalinity and the kind of alkali hydroxide. However, the electrochemical impedance for Cu₂O reduction was considerably affected by the kind and concentration of alkali hydroxide. The diameter of the capacitive loop, i.e., the charge-transfer resistance (R_ct), was increased with increase in solution alkalinity. It should also be noted that R_ct was increased in the order of KOH < NaOH < LiOH. These dependences were consistent with the good separation between the reduction potentials of CuO and Cu₂O in chronopotentiometric and voltammetric measurements with strongly alkaline electrolytes containing Li⁺. The inductive loop observed for the Cu₂O reduction at higher concentrations of KOH (>6 M) and LiOH (>0.2 M) suggested the existence of an intermediate species (probably CuOH). The specific inhibitory effect of Li⁺ ions on the reduction of Cu₂O might be explained by a possible stabilization of CuOH by Li⁺ ions.     

Synthesis of novel UV-curable difunctional thiourethane methacrylate and studies on organic–inorganic nanocomposite hard coatings for high refractive index plastic lenses

This study relates to the development of ultraviolet (UV)-curable, organic–inorganic nanocomposite hard coatings for plastic lens substrates, especially for polythiourethane (PTU) and polycarbonate (PC). Novel difunctional thiourethane methacrylate (mercaptoethylsulfide-thiourethane methacrylate: coded MES-TUMA and isophorone diisocyanate-mercaptoethylsulfide-thiourethane methacrylate: coded IPDI-MES-TUMA) was synthesized to enhance the adhesive strength for PTU. On the basis of IR, ¹H NMR, electron spray ionisation-mass spectrometry (ESI-MS) analysis and gel permeation chromatography (GPC), the expected structures were confirmed. These difunctional thiourethane methacrylates were easily mixed with multifunctional urethane acrylate, surface-modified ZrO₂–TiO₂ nanoparticles and photoinitiator in coating formulations. The UV-cured organic–inorganic nanocomposites were very useful as hard coatings for high refractive index plastic lenses such as PTU and PC.     

Processing of Oriented K(Ta,Nb)O3 Films Using Chemical Solution Deposition

K(Ta,Nb)O₃ (KTN) thin films have been prepared by the chemical solution deposition method. KTN precursors consisted of a uniform mixture of K[Ta(OC₂H₅)₆] and K[Nb(OC₂H₅)₆] with interaction at the molecular level. Perovskite KTN thin films with the desired composition (Ta/Nb = 65/35, 50/50, and 35/65) were synthesized from the precursor solutions by the dip coating method. KTN thin films with (100) preferred orientation were successfully synthesized on MgO(100) and Pt(100)/MgO(100) substrates. X-ray pole figure measurements showed that grains of KTN films had a prominent three-dimensional regularity on MgO(100) and Pt(100)/MgO(100) surfaces. The Curie temperatures of KTN films decreased with increasing Ta/Nb ratio. Typical P-E hysteresis loops were observed for KTN thin films of three compositions on Pt(100)/MgO(100) substrates. The values of remanent polarization ( P _r) of KTN films increased as the Ta/Nb ratio changed from 65/35 to 35/65.     

Photoreaction of Titanium-Based Metal-organic Compounds for Ceramic Fine Patterning

The photoreaction of metal-organic compounds prepared by the chemical modification of metal alkoxides was investigated for the patterning of ceramic films. The chemical stability and photoreactivity of these compounds were found to be greatly influenced by the kind of chemical additive applied during the syntheses of the precursor solutions. In this study, the photoreaction of the precursor thin films prepared by the addition of alkanolamines was achieved by tuning the wavelength of the incident UV light. The decomposition of the organic moieties of the percursors was clearly observed in IR spectra during UV irradiation. Furthermore, the spectrum of the titania precursor film in the visible and ultraviolet regions (UV-vis) changed in accordance with the irradiation time. The photolithography of the titanium precursor pattern was successfully achieved by means of these techniques.     

Size-dependent correction factors for absorption measurements using filter-based photometers: PSAP and COSMOS

Filter-based absorption photometers have been widely used to measure mass concentrations of black carbon (BC) by measurement of the absorption coefficient of BC. In these techniques, correction for the effect of multiple scattering by the filter medium is necessary, even if only BC particles are extracted by evaporating co-existing volatile compounds using a heated inlet. The correction depends on particle size, because it varies with the aerosol penetration depth into the filter. The size dependence has not, however, been taken into account in previous studies. For the first time, we quantify the particle size dependence of the sensitivities of two filter-based photometers, PSAP and COSMOS, using mono-disperse nigrosin particles, which were generated by the combination of a differential mobility analyzer and an aerosol particle mass analyzer. At diameters smaller than 200 nm, the absorption coefficients measured by PSAP and COSMOS were much larger than those calculated by Mie theory. The size-dependent correction factors for PSAP and COSMOS are determined by comparing the observed absorption coefficients at a flow rate of 0.7 standard liter per minute with those calculated by Mie theory. The correction factors to the mass absorption cross-section are also estimated for typical size distributions of ambient black carbon particles. The new factors reduce the mass absorption cross-sections measured by PSAP and COSMOS by 28–36% for typical ambient black carbon particles observed with an inlet heated to 400 °C.     

Structural Investigation of the Binding of 5‐Substituted Swainsonine Analogues to Golgi α‐Mannosidase II

Golgi α‐mannosidase II (GMII) is a key enzyme in the N‐glycosylation pathway and is a potential target for cancer chemotherapy. The natural product swainsonine is a potent inhibitor of GMII. In this paper we characterize the binding of 5α‐substituted swainsonine analogues to the soluble catalytic domain of Drosophila GMII by X‐ray crystallography. These inhibitors enjoy an advantage over previously reported GMII inhibitors in that they did not significantly decrease the inhibitory potential of the swainsonine head‐group. The phenyl groups of these analogues occupy a portion of the binding site not previously seen to be populated with either substrate analogues or other inhibitors and they form novel hydrophobic interactions. They displace a well‐organized water cluster, but the presence of a C(10) carbonyl allows the reestablishment of important hydrogen bonds. Already approximately tenfold more active against the Golgi enzyme than the lysosomal enzyme, these inhibitors offer the potential of being extended into the N‐acetylglucosamine binding site of GMII for the creation of even more potent and selective GMII inhibitors.     

MiR-10a in Pancreatic Juice as a Biomarker for Invasive Intraductal Papillary Mucinous Neoplasm by miRNA Sequencing

New biomarkers are needed to further stratify the risk of malignancy in intraductal papillary mucinous neoplasm (IPMN). Although microRNAs (miRNAs) are expected to be stable biomarkers, they can vary owing to a lack of definite internal controls. To identify universal biomarkers for invasive IPMN, we performed miRNA sequencing using tumor-normal paired samples. A total of 19 resected tissues and 13 pancreatic juice samples from 32 IPMN patients were analyzed for miRNA expression by next-generation sequencing with a two-step normalization of miRNA sequence data. The miRNAs involved in IPMN associated with invasive carcinoma were identified from this tissue analysis and further verified with the pancreatic juice samples. From the tumor-normal paired tissue analysis of the expression levels of 2792 miRNAs, 20 upregulated and 17 downregulated miRNAs were identified. In IPMN associated with invasive carcinoma (INV), miR-10a-5p and miR-221-3p were upregulated and miR-148a-3p was downregulated when compared with noninvasive IPMN. When these findings were further validated with pancreatic juice samples, miR-10a-5p was found to be elevated in INV (p = 0.002). Therefore, three differentially expressed miRNAs were identified in tissues with INV, and the expression of miR-10a-5p was also elevated in pancreatic juice samples with INV. MiR-10a-5p is a promising additional biomarker for invasive IPMN.     

Scanning probe microscopy installed with nanotube probes and nanotube tweezers

We have developed well-controlled processes for the growth and manipulation of carbon nanotubes. The relatively thin multiwalled nanotubes were prepared with high purity by arc discharge with a high gas temperature. In the manipulation of nanotubes, the first crucial process is to prepare a nanotube array, so-called nanotube cartridge. We have found the alternated current electrophoresis of nanotubes by which nanotubes are aligned at the knife-edge of a disposal razor. The second important process is to transfer a nanotube from the nanotube cartridge onto a substrate in a scanning electron microscope. Using this method, we have developed nanotube probes and nanotube tweezers that operate in a scanning probe microscope (SPM). The nanotube probes have been applied for observation of biological samples and industrial samples to clarify their advantages. The nanotube tweezers have been demonstrated for their motion in scanning electron microscope and operated to carry a nanomaterial in a SPM.     

Synthesis and crystal structure analysis of complex hydride Mg(BH4)(NH2)

Complex hydride Mg(BH₄)(NH₂), which consists of double anion BH₄⁻ and NH₂⁻, was synthesized and the crystal structure was analyzed by synchrotron X-ray diffraction. The mixture sample of Mg(BH₄)₂ + Mg(NH₂)₂ prepared by ball milling was reacted and crystallized to Mg(BH₄)(NH₂) by heating at about 453 K. This crystal phase transforms into amorphous phase above 473 K and subsequently the dehydrogenation begins. The crystal structure of Mg(BH₄)(NH₂) was determined from measurement data at 453 K (chemical formula: Mg_0.94(BH₄)₁(NH₂)_0.88, crystal system: tetragonal, space group: I4₁ (No.80), Z = 8, lattice constants: a = 5.814(1), c = 20.450(4) Å at 453 K). Mg(BH₄)(NH₂) is ionic crystal which the cation (Mg²⁺) and the anions (BH₄⁻ and NH₂⁻) are stacking alternately along the c-axis direction. Two BH₄⁻ and two NH₂⁻ tetrahedrally coordinate around Mg²⁺ ion.     

l-Ascorbic acid as an alternative fuel for direct oxidation fuel cells

l-Ascorbic acid (AA) was directly supplied to polymer electrolyte fuel cells (PEFCs) as an alternative fuel. Only dehydroascorbic acid (DHAA) was detected as a product released by the electrochemical oxidation of AA via a two-electron transfer process regardless of the anode catalyst used. The ionomer in the anode may inhibit the mass transfer of AA to the reaction sites by electrostatic repulsion. In addition, polymer resins without an ionic group such as poly(vinylidene fluoride) and poly(vinyl butyral) were also useful for reducing the contact resistance between Nafion membrane and carbon black used as an anode, although an ionomer like Nafion is needed for typical PEFCs. A reaction mechanism at the two-phase boundaries between AA and carbon black was proposed for the anode structure of DAAFCs, since lack of the proton conductivity was compensated by AA. There was too little crossover of AA through a Nafion membrane to cause a serious technical problem. The best performance (maximum power density of 16 mW cm⁻²) was attained with a Vulcan XC72 anode that included 5 wt.% Nafion at room temperature, which was about one-third of that for a DMFC with a PtRu anode.